Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC NEAR CIVIL HOSPITAL VILLAGE PO CHOWARI DISTT CHAMBA HP | CHOWARI | CHAMBA | HIMACHAL PRADESH | 176302 | L1 | Accepted-AOC Being Lowest L1 | |
| 2 | L2₹18.4 L+₹3.8 L (26.4%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹22.0 L+₹7.4 L (51.1%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹22.8 L+₹8.3 L (56.9%)Rejected-Finance VPO BAILLY TEH DALHOUSIE DISTT CHAMBA HP 176303 | DALHOUSIE | CHAMBA | HIMACHAL PRADESH | 176303 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹23.9 L+₹9.3 L (64.2%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
3 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Pathankot
GE (AF) Pathankot-145001
WELCOME MAINT AND MISC REPAIRS TO CERTAIN BUILDINGS AT MOTITIBBA, BAKROTA AND DAINKUND AT AIR FORCE STATION DALHOUSIE
2022_MES_522414_1
8421/GE/PAF-09/2022-23
Open Tender
Support/Maintenance Service
Item Rate
270 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Pathankot
₹52,000
Yes
17 Jun 2022
6 May 2022
6 Jun 2022
6 May 2022
3 Jun 2022
20 May 2022
60 days
Amount
Preparation of old surfaces by brooming down or steel wire brushing scrapping down smoke soot,moulds, moss and efforescent salt and trading oil and greasy spot and applying two coat of white wash over a coat of primer on old decorated surfaces of walls complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No. 1 above but on ceiling complete all as specified and directed by Engineer-in-Charge.
Preparation of old surfaces by brooming down or steel wire brushing scrapping down smoke soot,moulds, moss and efforescent salt and trading oil and greasy spot and applying two coat of Oil bound distemper of any shade on old decorated surface of walls complete all as specified and as directed by Engineer-in-Charge.
All as per Srl item No. 3 above but on ceiling complete all as specified and directed by Engineer-in-Charge.
Preparation of old surfaces including applying one coat of Synthetic enamel paint on old decorated surface of wood of any description not otherwise described over 10cm in width or girth complete all as specified and all as directed by Engineer-in-Charge.
Preparation of wooden surfaces and applying under coating varnish and finishing coating varnish with synthetic varnish over a coat of wooden filler liquid transparent filler coat on wooden surfaces of any description, over 10cm in width or girth complete all as specified and directed by Engineer-in-Charge.
Preparation of old surfaces and applying one coat of Synthetic enamel paint on old decorated surface of steel of any description not otherwise described over 10cm in width or girth complete all as specified and all as directed by Engineer-in-Charge.
Taking down cement plaster of any thickness racking out joints, hacking for key scrubbing down with water including removal of rubbish of the premises complete all as specified and all as directed by Engineer-in-Charge.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and all as directed by Engineer-in-Charge.
Rendering 5 mm thick on ceiling faces other than fair of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and all as directed by Engineer-in-Charge.
Preparation of new surfaces and applying two coats of Oil bound distemper, of any shade complete all as specified and as directed by Engineer-in-Charge.
All as per Srl item No. 11 above but on ceiling complete all as specified and directed by Engineer-in-Charge.
Dismantling granite flooring, hearth including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge
White glazed ceramic tiles of 1st or premium quality edge cut joint free tiles in vertical surface glossy finish of size 350x450x 7mm thick set and jointed in neat grey cement slurry and pointed in white cement to match the colour of tiles including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and all as directed by Engineer-in-Charge.
Non skid tiles coloured of 1st or premium quality edge cut joint free tiles exc 0.11 sqm and n.exc 0.18sqm ,7 to8mm thick of any colour pattern in floor set and jointed in grey cement slurry and pointed in white cement to match the colour of tile including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and all as directed by Engineer-in-Charge.
Light Shade Vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tile exceeding not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and all as directed by Engineer-in-Charge.
Granite of any type tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including and polishing including 25mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles; complete all as specified and all as directed by Engineer-in-Charge.
Brickwork with sub class `B` old size brick straight or curved on plan exc 6 mtr mean radius built in cement Mortar 1:6 complete all as specified and all as directed by Engineer-in-Charge.
Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer-in-Charge.
PCC 1:4:8 type D-2 using (40mm graded crushed stone aggregate) 100mm thick, as in sub base complete all as specified by Engineer-in-Charge.
PCC 1:2:4 type B-1using 20mm graded crushed stone aggregate) 40mm thick, finished even and smooth without using extra cement as in floors complete all as specified by Engineer-in-Charge.
PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) 75mm thick, finished even and smooth without using extra cement as in plinth protection complete all as specified by Engineer-in-Charge.
Drapery curtain rod of metalic 20mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps for every one meter fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each leaf with shutters (without taking off shutters from the frame) and removing from site all as specified and directed by Engineer-in-Charge.
Taking down shutters from the frame of any description exe 1sqm but n exc 2 sqm each leaf and removing from site all as specified and directed by Engineer-in-Charge.
Supply and fixing Solid PVC door frame of size 50 mmX47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube suppling fixing in opening as per specification and directed by Engineer-in-Charge.
Factory made solid PVC moulded door shutter 30 mm thick consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded wood gain printed PVC sheet 5 mm thick 15 mm wide PVC sheet beading complete all as specified and directed by Engineer-in-Charge.
35mm thick skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze etc. edges of framing plain. chamfered or rounded, fitted with cut and mitred beads for securing the wire mesh with wiremesh on two parts with tower bolt , sliding bolt , hinges ,door handle etc including two coats of synthetic enamel smoke grey paint over one coat of wood primer supplied to chowkhats complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 40mm thick, 2nd class hard, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with comercial face veneers; fitted to chowkats including tower bolt , sliding bolt , hinges ,door handle etc and including two coats of synthetic enamel smoke grey paint over one coat of wood primer complete all as specified and directed by Engineer-in-Charge.
Supply and fixing anodised aluminium power coating minimum thickness of powder coating 50 micron frame for doors , windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing anodised aluminium power coating minimum thickness of powder coating 50 micron frame for door shutters,aluminium section weighing 0.55 kg/m including joining cleats glazing clips rubber packing, anodised aluminium snap beading screws etc complete all as specified and directed by Engineer-in-Charge.
Suppling and fix 4 mm thick tinted/ plain glass for aluminium windows / doors having each pane exc 0.5 sqm inluding complete fittings all as specified and directed by Engineer-in-Charge.
Supply and fixing Factory made Steel window 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) Stainless steel Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete fittings all as specified and directed by Engineer-in-Charge.NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.
Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete & all as specified by Engineer-in-Charge.
Supply and fixing 3 mm thick glass in repair ordinary quality and glazing with beads in squares n exe 0.5 sqm each pane all as specified by Engineer-in-Charge.
Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples as in repairs complete & all as specified by Engineer-in-Charge.
Hacking out old glass (any thickness size, quality or ndescription) from the metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete & all as specified by Engineer-in-Charge.
Supply and fixing 3 mm thick sheet glass in repair ordinary quality and glazing with beads in squares n exe 0.5 sqm each pane all as specified by Engineer-in-Charge.
Supply and fixing rough cast wired glass, 6.4 mm thick not exc 0.5 sq.m and glazing with oil putty/nails by making suitable arrangements like beading, in square complete all as specified by Engineer-in-Charge.
Supply and fixing 100 mm butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified by Engineer-in-Charge.
Supply and fixing 150 mm size stainless steel door handles, complete all as specified by Engineer-in-Charge.
Supply and fixing 300 mm aluminium alloy, anodised sliding door bolts with hasp,staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt and sliding bots of extruded section or cast-aluminium alloy fixed complete all as specified by Engineer-in-Charge.
Supply and fixing 150mm aluminium anodised barrel tower bolts extruded section fixed complete all as specified and directed by Engineer-in-Charge.
Stainless steel sink 1mm thick overall size 915mm X460mm bowl size 410x330x160mm with drainage board fixed in repair including removing old sink with plush washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed by Engineer-in-Charge.
Stainless steel sink 1mm thick overall size495mm X420mm bowl size 410x330x160mm with drainage board fixed in repair including removing old sink with plush washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel plate rack of size 30" X 39" complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 500 Litr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position includeing dismantling existing water tank and removing from site of any capacity complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 1000 Litr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position includeing dismantling existing water tank and removing from site of any capacity complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs vitreous chinaware water closet (Orissa Pattern) long pan of size 580mm x 440mm white with integral foot rests with ‘P’ or ‘S’ trap front or back inlet complete including provision of cement concrete bedding complete fixed in repair, including CI trap for the mentioned complete all specified and directed by Engineer-in-Charge .
Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc; complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern, white 10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of PVC with long bend of 32mm dia complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Brass CP mixer for mixing hot & cold water screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Brass CP wall mixer for mixing hot & cold water screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs health faucet including 1.00 m flexiable pipe with brass nuts for EWC as approved complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Brass chromium plated towel ring 20 mm dia fixed with chromium plated brass screw and wooden/Plastic cleats complete all as specified and as directed by Engineer-in-Charge
Supply and fixing towel rail 600 mm long Brass chromium plated fixed with chromium plated brass screw and wooden/Plastic cleats complete all as specified and as directed by Engineer-in-Charge
Supply and fixing floor door stopper of aluminium alloy body and tongue, 140 mm anodised, with hard drawn steel spring fixed in floor complete all as specified by Engineer-in-Charge.
Supply and fixing in repairs bib taps, 15 mm cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs long body bib taps, 15 mm, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs stop valves, 15 mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge
Dismantling old Wall and ceiling boards (fiber, pulp insulation/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge
M&L for 6mm thick Asbestos cement plain building boards, fixed to timber framework with screws complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed by Engineer-in-Charge
Non-asbestos ceiling board 0.595x0.595mtrx4mm thick designeer boards of fixed with powder coated GI framing including drilling hole for fixing GI frame including 4mm GI wire suspender and clips complete all as specified and as directed by Engineer-in-Charge
Supply and fix 5 mm thich PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified by engineer- in -charge.
Supply and fix solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as per specification and drawing complete all as specified by engineer- in -charge.
Supply and fixing 15mm dia PVC connection with brass check nut of length 450mm/600mm all as specified by Engineer-in-Charge.
Supply and fixing chromium plated Grating doom 125 mm dia with cockroach trap fixed properly to the floor and sealed properly and finished with white cement complete all as specified.
Supply and fixing chromium plated Grating doom 125 mm dia with waste hole and cockroach trap fixed properly to the floor and sealed properly and finished with white cement complete all as specified.
Dismantling Plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified and as directed by Engineer-in-Charge
Supply and fixing 0.80 mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed by Engineer-in-Charge
Supply and fixing soap dish CP complete all as specified and as directed by Engineer-in-Charge
Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified and as directed by Engineer-in-Charge
Supply and fixing Cabinet mirror plastic body for toilet of size 350x450mm with 4mm thick looking mirror complete all as specified and as directed by Engineer-in-Charge
Supply and fixing PVC lid for poly water storage tanks of capacity 500 litres including PVC hinges and PVC locking both complete all as specified and as directed by Engineer-in-Charge
Demolition of reinforced cement concrete n.exc 15 cm thickness complete all as specified and as directed by Engineer-in-Charge
Pre-cast RCC slab for kitchen slab in 1:2:4 type B-1 using 20mm graded crushed stone aggregate complete all as specified and as directed by Engineer-in-Charge
Mild steel TMT bars 10mm dia and over , cut to length bent to shape required includng cranking bending spriatully for hooping for columns, hooking ends and binding with and and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge
Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe including disconecting existing tanks and refixing in position after cleaning for exc 500 & n. Exc 1000 liters capacity of tank complete all as specified and directed by Engineer- in - charge.
Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe including discnneecting existing tanks and refixing in position after cleaning for exc 250 & n. Exc 500 liters capacity of tank complete all as specified and directed by Engineer- in - charge.
Supply and fixing of ISI marked Hydraulic door closed complete all as specified and directed by Engineer- in - charge.
Supply and fixing of 15 mm GI tubes medium grade with all fittings and fixed to walls or ceilings or in floors including taking down complete all as specified and directed by Engineer- in - charge.
All as pe item No 86 above but 20 mm dia complete all as specified and directed by Engineer- in - charge.
Supply and fixing in repairs flushing jet for pedestal pattern WC including flexible pipe and brass chromium plated nuts, complete all as specified and directed by Engineer- in - charge.
Surya & Gautam Builders
M/S MULTI ENGINEERS
Havish Construction
Roshan Lal Thakur
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .