Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical Not Approved by CFA |
| 4 | Rejected-Technical | Rejected-Technical Not Approved by CFA |
Tender Value
₹37.3 L
EMD Value
₹74,600
Closing Date
2 Nov 2024, 12:00 pmClosed
SO1 Works HQ 27 Sector Assam Rifles
27 Sector Assam Rifles
Provision of water supply scheme for COB of 36 Assam Rifles at T Khongkhai
2024_ARMHA_828881_1
14027/27 Sect/8785/WSS/2024-25
Open Tender
Civil Works
Works
365 days
Churachandpur
As per tender documents
2 documents required · 2 mandatory
₹1,000
DG Assam Rifles
₹74,600
29 Nov 2024
3 Oct 2024
5 Nov 2024
7 Oct 2024
2 Nov 2024
8 Oct 2024
7 Oct 2024 - 31 Oct 2024
Amount
SCHEDULE ‘A’ PART-I ( Water Pipe line )
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore metre
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 32mm nominal bore
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation,refilling the earth or cutting of wall and making good the same complete wherever required :25mm nominal bore each
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation,refilling the earth or cutting of wall and making good the same complete wherever required :20 mm nominal bore each
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore
Providing and fixing gun metal non- return valve of approved quality(screwed end) :25 mm nominal bore Vertical
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix , i/c necessary excavation, foundation concrete 1:5:10 and inside plastering with cement mortar 1:3, 12mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Kirloskar 1HP motor of material cast iron ,discharge range 3300-1300lph ,delivery size 25mm
Crompton 2HP centrifugal mono block pump,discharge range 54000-27000lpm,suction & delivery size 80 mm
Crompton 3HP centrifugal mono block pump,discharge range 450-1050 lpm.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:All kinds of soil
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level
SCHEDULE ‘A’ PART-II (Water Storage)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank 5000 Ltr, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge : All kinds of soil
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand)
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
M/S MD INAYAT HUSSAIN (BID ID -3113279)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .