Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC HOUSE NO 97 MOHALLA AFGHANA GALI KRISHAN DWARA JAMMU | JAMMU | JAMMU | JAMMU AND KASHMIR | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.7 L+₹45,599.84 (1.33%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹34.9 L+₹64,519.10 (1.89%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹35.4 L+₹1.2 L (3.48%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹36.0 L+₹1.8 L (5.14%)Rejected-Finance C O SECTOR 02 HOUSING COLONY CHANNI HIMMAT JAMMU J K PIN 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
CERTAIN LBW REVENUE AND MINOR WORK AT NAGROTA AND REASI UNDER GE NAGROTA
2024_MES_662468_1
CA NO GEN-46/2024-2025
Open Tender
Civil Works
Item Wise
180 days
NAGROTA
Clas d category a i
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹94,000
Yes
15 Oct 2024
27 Jun 2024
5 Sept 2024
27 Jun 2024
3 Sept 2024
12 Jul 2024
Amount
SCHEDULE ‘A’ PART-I Surface excavation n.exc 30 cm and average 15 cm deep and getting out in hard / dense soil complete all as specifed &.directed
Excavation in trenches in any type of soil n.exc 1.5m wide and n.exc 1.5m deep and getting out complete all as specifed &.directed
Excavating in post holes (or similar holes) each n exc 0.5 cum including dismantling PCC including disposal of surplus n. exe 50m complete all as specifed &.directed
Material and labour Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 for manhole and external pointed flush in same mortar as the work proceeds complete all as specifed &directed
Removing excavated material to a distance exc 250m and n.exc 500 mtr and depositing ramming in layers complete all as specifed &.directed
Returing filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specifed &.directed
M & L PCC 1:4:8 type D-2 (using 40 mm grade aggregate) in foundation, filling and mass concrete complete all as specifed &.directed
M & L rendering 15 mm thick on external faces brick/concrete surfaces other than fair faces of wall in cement mortar 1:4 rendering is to be finished even and smooth (without using extra lime or cement all as specified and directed)
M & L preparing new plastered surfaces of walls ans applying two coats of cement base paint over a coat of primer complete all as specified and directed
M & L for hard core of broken bricks n exe 63mm, deposited, spread and levelled in layers n exe 15mm thick, wastered and rammed to a true surface complete all as specifed &.directed
M&L for 100mm PCC 1:4:8 type D2 (40mm graded aggregate) in sub base complete all as specified and directed..
M&L for 100mm PCC 1:2:4 type B1 (20 mm graded aggregate) on top surface and finishing surface of concrete pavements by brooming finish etc complete all as specifed &.directed
M&L for cement concrete 1:3:6 type C2, 75mm thick (20 mm graded stone agg) as in plinth protection complete all as specified and directed.
M&L for Forming contraction (dummy) joints 65 mm deep x 10mm wide, grade ‘A’ filled with sealing compound complete all as specifed &.directed
M&L for Forming Construction joints 30 mm deep x 10mm wide, grade ‘A’ filled with sealing compound complete all as specifed &.directed
M&L PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in copings, benching, weathering and slightly chamfering complete all as specifed &.directed
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E-250) quality A complete all as specified and directed..
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed
M & L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer all as specified and directed
M&L M.S.work as in wind ties for roofing incl. securing bolts, posts and struts complete work conforming to Fe 290 Gde E-165 etc. complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 30 cm deep and getting out in any type of soil complete all as specified and directed.
M&L Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed.
Supply only Fine aggregate (sand) for laying floor finishes complete all as specified and directed.
M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in copings, kerbs including necessary formwork etc complete all as specified.
Removing excavated material (soil) exc 1.5km and n.exc 5 km and spreading where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M&L Stone Kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush using granite or trap stone complete all as specifed &.directed .
M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.
Extra for forming fair faces (finished drain of channel 30cm inner grith in cement concrete using extra cement including forms moulds mitred stopped end etc complete all as specified and directed.
Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft / loose soil, getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specifed &.directed
M&L PCC 1:4:8 Type D2( using 40mm graded crushed stone agg) , as in foundation filling and mass concrete.complete all as specifed &.directed
S&F for Rolled sections as in post, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde- E-250 quality-A)complete all as specifed &.directed
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specifed &.directed
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed &.directed
SCHEDULE ‘A’ PART-II M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 2.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20 mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick bakalite laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 2.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for one 15Amp socket out let controlled by one 15 Amp switch on independat board complete all as specifed &.directed
All as per item No 35 above but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket complete with one single pole MCB 20 amp 240V complete all as specifed &.directed
Supply and install stationary water heater (Geyser) vertical storage type of 100 Ltr capacity electric driven closed vented 5 star marked suitable for operation for single phase 240 volts, inner container made out of stainless steel, 3000 watt, pressure rating 0.8 Mpa, class-1, 5 star with all necessary fittings, cutting out holes in existing cement concrete/bricks walls built in cement mortar, supply, fixing, grouting new purpose make mild steel bolts with screwed end 8mm dia and 100mm long alongwith one washer and one Hexagonal nut at screwed end for fixing the geyser all as specified and directed including making good the disturbed surface to match with the existing surface and finishes complete all as specifed &.directed . Make : Havells Monza DX Product Code (GHWANOSWH100) (Readily work on pressure motor) or equivalent make as specified in PS.
Supply and fixing of Instantaneous electric Water Heater with advanced 4 level safety (White) 5 Ltr capacity Wattage 4.5 KW 230 V, 50 Hz Pressure 6.5 Bar Capillary thermostate automatic cut-out pressure release valve and fusible plug complete all as specified and directed including making good the disturbed surface to match with the existing surface and finishes complete as specified and directed by Engr-in-Charge. Make : Havells (Code GHWAIBPWB003) white blue Rated power 4.5 KW) or equivalent make as specified in PS
15 mm bore galvanized steel water tubing medium grade with all GI fittings (as union, tee, socket, nipple, elbow) including taking out old unserviceable pipes by cutting, screwing and altering the old pipe lines if any required at site including cutting chase, fixed in walls, ceiling and laid in floors complete and making good to disturbed surface all as specified and directed
M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections.complete all as specifed &.directed
Mohd Rafiq and Co (BID ID -3066457)
M/S KALSI ENGINEERS AND CONTRACTORS (BID ID -3066449)
R.K. Works (BID ID -3073073)
MAMTA ENTERPRISES (BID ID -3074030)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .