ANTI ERROSION WORKS ON LEFT BANK OF RIVER GHAGHARA FROM MEETING POINT OF RIVER RAPTI AND GHAGHARA UP TO VILLAGE- KURAH PARASIA IN DISTRICT DEORIA

Amount

Earth work in cutting of slope & making Daula in all type of soil including all lead, lift, labour, T&P with proper compaction and dressing complete in all respect.

Earth work with dressing in dumat or loam soil for raising of village road including all lead & lift, cartage, labour, T&P with proper compaction and dressing complete in all respect.

Filling and Dumping of new E.C. Bags in nylon crate filled with local earth sewing with sutali and placing in position.

Supplying & Laying Geo Textile (sheet) made of 130 gsm woven multifilament polypropylene yarn below slope pitching including cost of all material, labour, T&P required for proper complition of work.

Supplying & Laying Geo Bags made of 200 gsm woven polypropylene geotextile in size of 1.00 x 0.75 m. in slope pitching filled with local earth with all cost of material, labour, T&P required for proper complition of work. (In reference to TS No.-6)

Supplying & Laying Geo Bags made of 200 gsm woven polypropylene geotextile in size of 1.00 x 0.75 m. in lanching apron filled with local earth in nylon crate size 1.00 × 1.00 × 1.00 m mesh size 20 × 20 cm with all cost of material, labour, T&P required for proper complition of work. (In reference to TS No.-6)

Supplying & Laying Geo Bags made of 200 gsm woven polypropylene geotextile in size of 1.00 x 0.75 m filled with local earth in P.P. Rope Gabion size 1.80 × 1.80 × 0.50 for stepping of slope in village portion with all cost of material, labour, T&P required for proper complition of work. (In reference to TS No.-6)

Laying Porcupine size 3.00 x 0.10 x 0.10 m. and filling jhakhar and binding with 4 mm wire around Porcupine with all cost of material, labour,T&P required for proper complition of work.

Boring with 150 mm dia casing pipe including lowering and extraction of assembly.(For making Regulator)

Hiring of diesel Pumps 5 H.P. for dewatering including running by operator with fuel and all accessories like section pipe and delivery pipe etc.

Supply and filling local sand including cost of all material labour & T&P etc.(For making well type fall)

P/L C.C. M10 in foundation with (20-40) mm stone ballast and course sand including all cost of materials, labour, T&P etc. with proper completion of work.

Shuttering for R.C.C. Work including all cost of materials, labour, T&P etc.With proper completion of work.

Supplying & Laying, Jointing and Fixing of NP-3 R.C.C. Hume Pipe 1000 mm dia in proper position.

Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete piles of grade M-20 of specified diameter and length below the pile cap, to carry safe working load not less than specified, including the cost of steel reinforcement, the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap)

P/L C.C. (1:2:4) in making collor at pipe joint with stone grit and course sand including all cost of materials, labour, T&P etc. With proper completion of work. (For making Regulator)

Providing cutting, bending binding & placing in position Tor steel reinforcement in R.C.C. work including cost of all material, labour and T&P etc. (For making well type fall)

P/L R.C.C. M20 with grit 10-20 mm size and coarse sand including cost of all materials, labour T&P etc. (For making well type fall)

1stclass brick work in1:4 C.M.including cost of all materials, labour and T&P etc.

Deep Struck Pointing in (1 : 2 ) C.M. with course sand including all cost of materials, labour, T&P etc. with proper completion of work. (For making Regulator)

Cement Plaster 12mm thick in 1:4 cement mortar including cost of all materials, labour, T&P etc. (For making well type fall)

Earth work in channelising the Drain U/S and D/S side. (For making Regulator)

Brick on edge pitching / flooring in 1 : 3 C.M. (For making Regulator)

Laying/Pitching Jhanwan in Apron at U/S and D/S side.(For making Regulator)

Making and fixing, Painting, Oiling & greassing Flapper Gate. (For making Regulator)

Vijai Construction (India) Pvt. Ltd.