Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹16.6 L+₹10,089.50 (0.61%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹16.8 L+₹31,247.10 (1.89%)Rejected-Finance NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹17.6 L+₹1.1 L (6.79%)Rejected-Finance UTARLAI KAWAS BARMER RAJASTHAN 344 001 | BARMER | RAJASTHAN | 344001 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
28 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Utarlai
GE (AF) Utarlai PB No. 11 Barmer 344001
REPAIR/REPLACEMENT OF BIRD PROOFING NET AND CERTAIN MISC WORK AT AF STN UTARLAI
2022_MES_555247_1
8326/E8
Open Tender
Civil Works
Item Rate
365 days
Utarlai
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Utarlai
₹40,000
Yes
15 Dec 2022
30 Sept 2022
4 Nov 2022
1 Oct 2022
28 Oct 2022
14 Oct 2022
Amount
Taking down old broken toughened tinted glass (any thickness, size, quality or description) including wooden/ Aluminium frames, glazed with putty or fixed with beads complete all as specified and directed .
S&F 6.0+ 6 .0 mm thick double clear float toughened glass with 1.25 mm PVB film and 32 mm aluminium spacers , including silika zel fixed with as per manufacturer's instruction , complete all as specified and directed . Note: (i)The aluminium snap beading ,rubber gasket and silicon adhesive for fixing to galss panel should be free for fixing and rate to be included in this item. (ii) All safety measures shall be taken by the contractor as per safety code
Taking down old broken silicon sealant and cleaning with wire brush , ragmar/ sand paper of 6 to 10 mm wide and 6 mm deep from toughened glass/ aluminium frames and providing silicon water proofing sealant for prevention of leakage and seepage Make : silicone 789, Gorilla 805002-10 , GE012A and Equivalent , complete all as specified and directed Note: (i) Bituminous filler pad for filling cavity /balance depth should be free for fixing and rate to be included in this item.
S & F Anodised aluminium frame for doors, windows, partion, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifiedcomplete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0 Sqm each complete all as specified and directed .
Taking down shutters of any description, area exc 1 Sqm and not exc 2.00 Sqm each complete all as specified and directed .
S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges 03 Nos of each door, anodised aluminum snap beading screws etc. complete all as specified. Note: The aluminum snap beading and rubber gasket for fixing to galss panel should be free for fixing and rate to be included in this item.
S & F Anodised aluminium window and ventilator shutters, side hung /fixed/sliding type/with or without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. Note: The aluminum snap beading and rubber gasket for fixing to galss panel should be free for fixing and rate to be included in this item.
S&F aluminum grill of any design and pattern as approved including aluminium beading for proper fixing of grill complete all as specified and directed .
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture 1.40mm fixed with stainless steel wire staples, complete all as specified and directed
S & F mild steel mortice lock vertical type size 100mm 4 levers complete all as specified and directed .
S & F 200 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt , complete all as specified and directed.
S & F Aluminium anodised barrel tower bolt of extruded section, 150mm long of bolt and fixed with screws, complete all as specified and directed.
Dismantling of mild steel work of any descriptions all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.
S & F in repairs high strength polythene mesh of aperture not more than 20 mm and nylon thread not less than 1.2 mm of any colour for bird proof netting to existing truss/purlin/hanger gate etc including cotton cloth border stitching, fixing arrangement like washer, clamp, fasteners, pulley etc all as specified and directed. (Note :- Rate deemed to be included by contractor for mechanical arrangements for fixing bird proofing net above 10 m height of bldgs/hangers).
S & F in repairs high strength polythene mesh of aperture not more than 20 mm and nylon thread not less than 1.2 mm of any colour for bird proof netting to existing opening of door/gates in vertical surfaces etc including cotton cloth border stitching, fixing arrangement like washer, clamp, fasteners, pulley etc and also providing cotton rope of 20 mm dia as per requirement basis for closing/opening of bird proofing net complete all as approved and directed. (Note :- Rate deemed to be included by contractor for mechanical arrangements for fixing bird proofing net above 10 m height of bldgs/hangers).
M&L for cutting holes in stone walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required , depth of embedded portion of hold fasts or lugs exc, half brick but not exc. one brick from the face of the jamb in to the wall complete all as specified and directed.
S&F in repairs framed work such as grills, grating, etc. with end of bars shouldered and / or riveted ,or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed
S & F in repairs for 20-25 mm thick Machine cut kota stone slab in chajja and pillar laid over MS angles and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
Taking down cement or cement lime plaster from concrete surface,brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of wall with cement mortar 1:4 finished even and smooth without using extra cement, completed all as specified and directed.
M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of new surfaces complete.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
S&F Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specified Note:- The size of aluminium section for frame work (snap Grid) for false ceiling work shall be as per clause No. 10.38 on page No. 216 of SSR Part -I.
S&F 12 mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples or on snap grid as in ceiling , including refixing lights and wiring complete all as specified and as directed.
Taking down roof treatment any type any description on top of roof complete all as specified and directed
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
M&L for cement concrete (1:2:4) type B-0 using 12.5mm stone aggregate as in roof padding benching kerbs of mud stops, rounded or chamfered on edges including form work complete all as specified and directed
M&L for Rendering 10mm thick in cement mortar (1:3) on concrete surfaces as on roof slab, finished even and smooth without using extra cement mixed with water proofing liquid as per manufecturer's instructions complete all as specified and directed.
M&L for applying roof treatment on top of roof with 3 mm thick APP modified membrane weight not less than 3.5 Kg/Sqm) with non woven polyster reinforcement / mat ( centre core ) shall be laid by torch application method with overlap 100 mm on length side and 100 mm on width side including a coat of bituminious oil based primer ( IS : 3384) @ 250 gm / Sqm and..including taking down and refixing lightining arrester stirrups and split AC outer unit , including testing and running of split AC with filling gas if required for commissioning complete all as specified and directed.
M/s Malinath Electricals
M/S TANUSHREE CONSTRUCTION COMPANY
M/S Tanisha Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .