Zone-05 Ward-04 ke antargat Neebi mukhya sadak se Chak Mirfazal Ali tak hot mix plant dwara sadak nirmaan karya.

Earth work cutting/Filling of embankment lead 30 m and up to 1.5 m lift with all complete work (S.I.No.253)

Construction of Granular Sub base (G.S.B) by providing closed graded material mixing by mix in place method including water and compacting with vibratory rollers as per MORT& H specification401

P/L of 7.50cm compacted layer of WBM Grade-2 with (45-63) mm ballast and stone screening type -B (dala gritt 11.20mm) including water charge and consolidation all complete of work

P/L of 7.50cm compacted layer of WBM Grade-3 with (22.40-53) mm ballast and stone screening type -B (dala gritt 11.20mm) including water charge and consolidation all complete of work

Providing&Applying Primer coat with emulsion at eh rate of 0.60kg/sqm as per mort&H Specification No 502

Providing&Applying of tack coat at the rate of 0.25kg/sqm includig material laboured all complition of work

Providing & Laying D.G.B.M.-50mm thick with 100-120TPH hot mix plant producing an average out put 75 tones per hour using crushed of aggregates of specified grading and premixed with bitumen VG-30 grade bluk @3.40% of weight of mix and including all completion of work as per MORT 7 Hspecification-504

Providing & Laying B.C-30 mm thick with 100-120TPH hot mix plant producing an average out put 75 tones per hour using crushed of aggregates of specified grading and premixed with bitumenC.R.M.B bluk55grade @5.00% of weight of mix and including all completion of work as per MORT & Hspecification-508

Brick edging on both sides of the road of brick class m-150,8cm wide and 12 cm deep laid with mud mortar including labour & supply of bricks finished to require template and in proper alignment and also including dressing &ramming the excavated earth as directed by the engineer incharge of the work including material labour & T&P etc for proper completion of work

Providing and laying of hot applied thermoplastic compound 5mm thick including reflectorising glass beads @500gms per sqm area thicknes of 5mm is exclsive of surface applied glass beads as per irc 35-2015 the finished surface to be level uniform.