138WE/L-180/2025-26

M&L Ladakhi style IInd class hardwood 5-12 mm thick wooden film on the face side and other side as in wall and ceilings fixed with screws as per manufacturers instructions including wooden nap grid frame work fixed with screws/ plugs etc. including GI suspenders of 4- 6 mm dia up to 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design and IInd class hard wood wooden gutties of size 50 mm x 50mm x 300/ 100 x 100 x 600 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) for wall complete all as specified and/or as directed by the Engr-In-Charge.

S&F 45mm thick 2nd class softwood, plain, framed, panelled shutters, with panels of timber flat on both sides (feather edged) fixing 8 Ladakhi auspicious signs in wooden on the face side as in wall fixed with screws/ fasteners as per manufacturers instructions including wooden snap grid frame work fixed with screws/ plugs etc by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) for wall complete all as specified and/or as directed by the Engr-In-Charge.

S&F anodised aluminium window and ventilator shutters, including aluminium jali fixed in one side, side hung type without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc. complete all as specified and/or as directed by Engr-in-Charge.

S&F MS rolled sections in main and cross beams, hip and jack rafters; purlins where connected to common rafters running rails and guids for sliding doors, fixed with angle cleats or other connecting plates and similar work conforming to Fe-410, Gde-E-250, quality A, complete all as specified and/or as directed by Engr-in-Charge.

M&L for 15mm thick rendering on fair faces of block/ brick wall works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and/or directed by Engr-in-Charge.

M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and as directed by Engineer-in-Charge.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms), complete all as specified and directed.

M&L sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.50 sqm in each pane complete all as specified and as directed.

Point wiring complete with 1.5 sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor cable as continuous earth lead complete all as specified and/or directed by Engr-in-Charge for the followings:-

One light/exhaust fan point controlled by one way switch.

One switch socket outlet 6 Amps, 230 volts point on same board.

One switch socket outlet 6 Amps, 230 volts point on independent board.

S&F made epoxy powder coated distribution board TPN 4 ways (VTPN MCCB DB) with metal door (IP-42 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts outgoings conforming to IS : 8623 complete all as specified and as directed.