REPAIR TO SEEPAGE, SUNKEN FLOOR TREATMENT INCLUDING JOINERY, CHAJJA, PLUMBING, MISC B/R WORK AND SMART PERIODICAL OF BLDGS AT AKHNOOR UNDER GE (NORTH) AKHNOOR

Amount

Taking down old unsv roof treatment including PCC padding if any, plastering, removing existing bitumen felt treatment including brushing, cleaning top surface of roof slab, brooming etc incl disposing off debris from MoD land complete all as specified and directed.

Rendering 15 mm thick in cement and sand mortar 1:3 on roof surfaces with mixing of water proofing admixture as per manufacturer's instruction including finishing the surface even and fair to receive roof treatment, complete all as specified and as directed. Note:- Supply only Water proofing compound shall not be measured & paid seperately.

Roof treatment :- (a) Apply a coat of bituminous primer conforming to IS - 3384 @ 0.40 Kg/Sqm on prepared surfaces. (b) After drying of primer apply a coat of hot blown 85/25 penetration grade blown bitumen conforming to (IS-702 @ 1.20 Kg/Sqm of surfaces. (c) Provide APP modified polymeric five layered membrane with central core of 100 micron high molecular high density film. Minimum weight of APP modified water proofing membrane shall be 3 Kg per Sqm. Product Name Multi plus manufactured by M/S STP texa Ltd Gurgoan/Hyper Plus Standard Manufactured by IWL India ltd Chennai, Bengal Acquaflux manufactured by Bengal bitumen New Delhi/Superior plus 310 by STP Lfd and any other product as appproved by E-in-C Br will be used. APP membranne will be laid across the slop from lowest line of slopping roof toward ridge with minimum end lap of 150mm and side lap of 75mm bonded with hot blown. Contd to srl item No 3.01...

(d) Over the APP membrane apply semi hot blown 85/25 grade bitumen penetration of bitumen when tested as per IS 1203 will not be more than 40/Confiming to IS 702 @ 1.20 Kg/Sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bitumen coat. (e) Coved fillet in PCC (1:2:4) type BO radius 75mm shall be provided at the junction of roof and vertical surface such as parapet wall around opening and treatment mentioned above (except fine sand) shall be applied followed by a cement plaster 20mm thick in CM 1:6. (f) If Non accessible roof:-After providing (a) to (d) provide aluminium paint as per manufacturer instruction. Complete treatment shall be carried out by the applicator of manufacturer only or throgh authorized personal only.

Sunken Floor treatment :- Providing and laying of water proofing treatment to sunken portion by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound of make as approved including demolition and filling of sunken floor. (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/ Sqm his layer allowed to air cure for 4 Hours. Note :- (a). Concrete for sunken slabs shall be mixed with WP compounds as per manufacturer instructions before carrying out water proofing treatment the sunken shall be tested with water for 48 hrs for any leakage/dampeness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested (Water proofing compound rate shall not be paid separately). Contd to srl item No 4.01......

(b). 50mm thick PCC at the bottom of slab and slope shall be 1:20 toward the corner of outer wall and GI pipe of 50mm dia (Med grade) be inserted at corner projecting outside 20 cm . (c). 15 mm plaster mixed with WP Compound shall be provided while concrete is green (d). Only floor area shall be measured for payment purpose. (e). Treatement shall only be done from approved manufacturer & name of manufacturer required to be approved from GE before treatement. (f) Joints of trap/WC/soil pipe shall be properly sealed with sealing compound.

Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors with & including screed bed 15mm thick in CM 1:4, complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutter of any description area exc 1 sqm but not exc 2.0 sqm each complete all as specified and directed.

PCC 1:2:4 type B-1 using 20mm graded aggregate for hold fast blocks, including necessary formwork for rough finished surface etc complete all as specified and directed.

Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25 x 3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts, complete all as specified & directed.

Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x25x3mm thick angle iron projecting 10cm on either side & tarring back of chowkats and holdfasts with & making good in cement mortar 1:3, complete all as specified & directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed.

35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified.

30mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc devided into square with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

Factory made solid panel PVC door shutter/ cupboard shutter/ kitchen cabinets 30mm thick style wooden texture consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed.

300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, fixed in repairs complete all as specified and as directed.

Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Powder coated aluminium anodised door shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Powder coated anodised aluminium window / ventilator( glazed / gauged skeleton shutter ), (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No. ) suitable handle (1 No.) complete all as specified and as directed.

Door closer hydraulically regulated, aluminium extruded section body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.

100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified.

Aluminium handle cast type anodised of size 150mm long ISI marked fixed in repairs complete extruded .

200 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.

Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & glazed shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 . Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid seperately under respective item

Description all as per Item No.25 above, but only fixed glass pane shutter without glazing bars.

Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

Figured glass pin headed type, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed at bottom rail of door of overall length of cover plate 150mm , all as specified and directed.

Preparation new steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and as directed.

Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer, complete, all as specified.

Curtain rail ,20 mm dia Stainless steel ,chromium plated fixed with CP braket, incl taking down of old curtain rods, complete all as specified.

Dismantling of floor hearth or wall tilling incl cement mortar bedding and removing unsv tiles and rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerb, padding , finished surface even and fair, complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in skirting/dado etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement and sand mortar 1:4 finish even and fair to receive tiles, complete all as specified and directed.

Vitrified ceramic tiles light shade 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade incl 15mm thick screed bed/back coat in cement and sand mortar 1:4 complete all as specified and directed.

Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in skirting/dado etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 10mm thick rendering in cement and sand mortar 1:4 finish even and fair to receive tiles, complete all as specified and directed.

Glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick rendering in CM 1:4 finished even and fair to receive tiles, complete all as specified and directed.

20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking platform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and moulding the edges, complete all as specified and directed. Note : A hole must be drilled in cooking platform for gas pipe.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Rendering 10mm thick cement plaster with cement mortar (1:6) on fair faces of brickwork or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Rendering 15mm thick in cement mortar (1:4) on fair faces of the brick work or cement concrete surfaces, finishing the surface even and smooth without using extra cement, complete all as specified

Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified.

Supply only Integral water proofing compound.

Demolition of brick work built in cement mortar including all quions, arches , pillars etc.

Brick work with sub class 'B' bricks , straight or curved on plan exc. 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

Description all as per Srl item No 51 here-in-before, but except bricks.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper on walls over & including one coat of alkali resistant primer, complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coats of cement based paint on walls over & including one coat of alkali resistant primer, complete all as specified.

Preparation of newly plastered surface of ceiling and apply two coats of oil bound distemper over one coat of primer, complete all as specified and directed.

Preparation of old plastered and unplastered surfaces of walls and applying one coat of oil bound distemper white/tinted including filling small depressions by putty , washing, rubbing, stopping brooming down with steel wire brushing all as specified and directed.

Preparation of old decorated surface and applying one coat of oil bound distemper on ceiling including filling small depressions by putty , washing, rubbing, stopping brooming down with steel wire brushing all as specified and as directed.

Repair to balcony/Facia/Roof projections and soffit of chajjas etc by taking down old rendering and hacking clearly the edges and corners smooth rounded for new plastered area exceeding 30sqm in width or girth & providing 15 to 20mm thick plastering to match with the existing thickness in CM 1:3 and including formwork up to height 7.0 mtr above ground level of bldg including two coats of Apex/cement based paint over one coat of primer complete all as specified.

Demolition of RCC water tanks (of any capacity measured in cum not in number ) , RCC cooking platform (slab) , chimneys concrete of any description in any position not otherwise specifically provided for cement concrete, complete all as specified and as directed.

Rotational moulded polyethylene 03 layer water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.

Rotational moulded polyethylene 03 layer water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.

Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and directed.

15mm dia bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe fixed in repairs complete all as specified and directed.

20 mm dia bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe fixed in repairs complete all as specified and directed.

Taking down eaves gutters and rain water pipe , soil and waste pipe PVC or CI (any size or pattern ), including all fittings, heads , shoes bends , swan-necks etc all as specified and directed.

110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in trenches or in floor etc., complete all as specified and directed.

75 mm dia PVC (SWR) Type-B pipes single socketed in any length with rubber ring joint laid in trenches or in floor all as specified and directed

PVC (SWR) bend 110 mm dia any radius all as specified and directed.

PVC SWR bends any radius 75mm bore complete all as specified.

PVC SWR 110mm dia Type-B ( pressure not less than 6 kg /cm2) pipes in any length fixed to walls with PVC/MS holder or clamps and conforming to IS-1729 complete all as specified and directed.

PVC SWR 75mm dia Type-B ( pressure not less than 6 kg /cm2) pipes in any length fixed to walls with PVC/MS holder or clamps and conforming to IS-1729 complete all as specified and directed.

PVC (SWR)110 mm junction single, (Single T) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed.

PVC (SWR) 75 mm junction single, (Double Y) equal or unequal ordinary or inverted with spigot or socket branch with oval access door all as specified and as directed.

PVC cowls 110mm fixed in repairs complete all as specified and directed.

PVC cowls 75mm complete all as specified and directed.

PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc., complete all as specified and as directed.

Mild steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Mild steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type screwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore including fixing in repairs complete all as specified and directed. Cat Part No-SOL-6053 of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

PVC valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified and as directed.

Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'P' trap fixed in repairs including making good dismantled floor cement concrete M-15 (1:2:4) type B-1 (Using 20mm aggregate) complete all as specified and directed. Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make specified in list make as approved by GE.

Vitreous china wash down water closet pan pedestal pattern in white colour with 'P' or 'S' traps excluding seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed. Cat Part No-20011 (SLICK) of Hindware or equivalent cat part of make NEYCER, CERA, PARRYWARE as approved by GE.

Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.2 meter long flexible spirochrome flex tube and ABS wall hook including making connections and fixed in repair in position complete in all respect as specified.Make-Jaquar Cat part no. ALD-573 or its equivalent cat part of make specified in list make, as approved by GE.

Toilet paper holder with flap recessed type stainless steel Complete all as specified and directed.Make-Jaquar cat part no. AQN-7753 or its equivalent cat part of make specified in list make, as approved by GE.

Vitreous China urinal with CP spreader Chrome finish hole and fixing accessories Half stall type (back or corner wall type)(size 355mm x 340mm x535mm) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including PVC Connection,waste pipe and coupling. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed in repairs complete all as specified and as directed by Engineer-in-Charge. Make- Jaquar Cat part no. URS-WHT-13261H or its equivalent cat part of make specified in list make, as approved by GE.

Vitreous china wash basin, white, flat back, size 550x400mm including waste fitting chromium plated brass, pillar tap, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe etc., fixed in repairs complete all as specified and as directed. Cat Part No-10086 of Hindware for Wash basin or its equivalent cat part of make specified in list make as approved by GE.

PVC connection 15 mm size, of length 600mm, with PTMT nuts supplied and fixed in repairs complete all as specified.

Waste pipe for SINK/WHB/Urinal for 32/40mm dia fixed in repairs all as specified & as directed.

C.P Swivel shower of any colour for fixing with 15 mm pipe ,with shower arm of size 195 mm long with bend of 45 degree with flange of any description (minimum weight 40 gm), supplied and fixed in repairs complete.

Bib taps (Long body) for 15mm bore dia of pipe, fancy type chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed. Cat Part No-CON-107KN of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

Bib tap (long body) 15 mm standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs complete all as specified.

Chromium plated fancy type quarter turn Pillar cock screwed down high pressure with crutch or butterfly handle screwed both end 15 mm bore dia fixed in repairs all as specified. Make-Jaquar Cat part no. FON-40011 of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

15mm bore brass CP wall mixer with provision for overhead shower arrangement with 115mm long bend pipe on upper side for mixing hot and cold water supply screwed down with connecting legs CP extension nipple & wall flange connector for hand shower arrangement with connecting Legs, wall Flanges & wall bracket for hand shower for mixing hot or cold water, screwed for iron pipe and fixed in repairs, complete all as specified and directed. Make-SOL-6273UPR of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

CP Brass swan neck Pillar cock with left/right hand operating knob with 450mm long braided hose screwed down for iron pipe 15mm dia bore fancy type fixed in repair complete all as specified and directed. Cat part no. CON-123BKN/127BKN of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

CP grating with or without hole100 mm dia fixed in repairs all as specified and as directed.

Stainless steel Soap dish, any type, fixed with plugs chromium plated brass screws fixed in repairs complete all as specified and as directed. Cat part No-AQN-7733 of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw for cooler stands and water tank stand including bending and welding angles, as necessary , gusset plates, riveting etc n exc 10 Kg each brackets, conforming to Fe.290. Gde E-165 (Brackets over 10 Kg each to be measured under "Structural Steel") Complete all as specified and directed . Note-Quoted rate shall also include cost of fabrication and fixing at site.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repairs, complete all as specified.

Applying 2mm thick wall care putty on old/ newly plastered surfaces of walls and prepare to receive painting complete all as specified and directed.

Taking down and refixing including resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed.

PCC 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame as in 50 mm parapet coping or in lintels upto 1.5m clear span, cills, plinth courses, string courses, coping, kneelers etc all as specified and directed.

Pre laminated particle board 18/19mm thick, exterior grade, laminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame and necessary item like hasp and staple , in repairs as cupboard/Almirah shelve and shutter, complete all as specified.

External teak wood lipping 6 mm thick fixed with nails for 18/19 mm thick board, complete all as specified.

35 mm thick, 2nd class soft wood, glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and as directed.

Factory made 30 mm thick ,Flush shutters, solid core construction, with block board core and plywood face panels, one face is commercial and other face is covered with decorative face veneer with lipping/frame to match the surface etc complete all as specified & as directed.

S&F in replacement of Kitchen cabinets of PVC Solid board(wooden texture) size 900mmx750mmx600mm, including partitions, shelves and drawers with brass sliding rails,channels,door handles, door catchers, overall cabinet internally and externally made with both side PVC laminated termite proof board, 18/19 mm thick, ISI marked including PVC kitchen/cup board frame of size 18mmx63mm made out of 18mm thick PVC pre-laminated ply coloured and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners, having following specifications: .....Contd to Srl item No 110.01

(i)Outer frame made six 50mmx47mm with same board. (ii)Shutters both side PVC laminated termite proof board, 18/19 mm thick having stainless steel soft closing concealed hinges with one No brass handle of 75mm including brass door catcher of not less than 50mm size in each shutter. (iii) Drawers made of both side PVC laminated termite proof board, 18/19 mm thick including brass handles of front and two sliding rails at sides in each drawer. (iv) All cabinets, drawers, frames, partitions and boards shall be fixed at site with brass machine screws and PVC plugs of suitable sizes. Note: (a) Only front face dimensions at site (Length and Height), shall be measured and entered in MB irrespective of Nos of partitions or drawers. Cost of all partitions as required at site shall also be deemed to have included in quoted rates and nothing extra is admissible on this account. (b) Different No of partitions and drawers may be as per site requirement with out any extra cost. (c) All labours and materials cost shall be deemed included in quoted rate.

Hasp and staple safety type of aluminium anodised 100 mm long as a cupboard locker, complete all as specified.

04 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

04 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm width of girth not other wise described and applying one coat of synthetic enamel paint all as specified.

75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

Green Marble work 18mm to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) inclduing pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Green marble with & including 15mm thick screed bed/base in CM 1:4, roughening/cleaning to existing surface of old concrete floor by picking, sweeping clean and washing down with water to remove dirt/dust and brushing neat cement slurry with 3.0 kg of cement per sqm all as specified and as approved. Note : A holes must be drilled in cooking platform for gas pipe.

Stainless steel gratings 100/125mm dia fixed with cement motar fixed in repairs, complete all as specified and as directed.

CP Sink coupling, 32mm bore brass, chromium plated for stainless steel sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs all as specified and as directed.

S&F nozzle bib tap 15mm standard of PTMT for washing machine connection any colour high pressure screwed for iron pipe and fixed in repairs complete all as specified.

Material and labour for complete removal and preparation of old/ plastered surfaces of wall/ceiling/ chajja by scrapping with true care wall sander: L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and applying two coats of cement based paint including priming with alkali resistant primer complete all as specified and as directed. NOTE :- (i) Proper curing with water to be done before and after application of first coat and second coat. (ii) Rate quoted shall be deemed to be included for scaffolding up to 12 mtr height building

Material and labour for complete removal and preparation of old decorated treatment on wall / ceiling by scrapping with true care wall sander: L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and applying two coats of oil bound emulsion distemper of approved tint including priming with alkali resistant primer complete all as specified and as directed. NOTE :- (i) Proper curing with water to be done before and after application of first coat and second coat.

CHOPRA CONSTRUCTIONS (BID ID -3061508)