Repair to path, Drain, Culvert, fencing under GE(West) Mathura

Amount

Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:4) complete all as specified and directed.

All as per item No 02.00 (here-in-before) but except bricks

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed.

M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished surface fair and even complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished surface fair and even complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof paint over one coat of primer on walls complete all as specified and directed.

Dismantling mild steel work of anydescription and in any position complete all as specified and directed.

M&L for Mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in reapir galvanized 2 strands steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixed to any shape/type of standard posts, straining bolts, including screwing or tightning at crossing with and provision of galvanized mild steel wire staple or steel pins etc as directed (Note : Each line of wire to be measured separately) complete all as specified and directed.

M&L for cement concrete (1:2:4) type B2 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, sligtly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described not exc 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of weather proof paint on walls complete all as specified and directed.

M&L for Preparing old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old plaster surfaces of walls and applying one coat of cement based paint on walls complete all as specified and directed.

M&L for cutting grass, bushes, wild grouth(after cutting the remaining grass should not more than 100mm from ground level) to entire satisfaction of Engineer-in-Charge and remova of grass, bushes and deposited as and where directed by Engineer-in-Charge

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

M&L 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 60mm thick Machine pressed precast inerlocking paver block rubber moulded of drak shade/double charged/ultra charged and any shape and size conforming to IS 15658-2006 of M-35 Grade complete all as specified and directed.

M&L for sand filling under floors or in foundation complete all as specified and directed.

M&L for designer, polished floor paver coloured tiles 30 cmx30cmx25 mm thick as in machine pressed set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bedding in layers in CM (1:6) complete all as specified and directed.

M&L for brick work withsub class 'B' brick on edges walls (less than Half brick) thick radius buit in CM (1:4) complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 as in surface channels and drains (using 40mm graded stone aggregate) complete all as specified and directed.

Extra for forming fair finished drain or channel 45cm inner girth in cement concrete using extra cement, including forms, moulds, mitered/stopped end etc. complete all as specified and directed.

Racking out cement joints to brick work in walls or bricks on edge in floors, surfaces channels, roofs etc. complete all as specified and directed.

M&L for flush pointing to brick laid flat or brick tiles in paving,surface channels,roofs etc in CM (1:3) complete all as specified & directed.

Demolition of reinforced cement concrete of any description and in any position such as precast manhole cover or cover slabs of septic tank etc (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for providing precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from natural ground and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any n. exc 4 Kg/Sqm complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but nexc 10cm long and diameter of neck in mm 11 to 15 complete all as specified and directed.

Karman Infra Projects

JWALA ELECTRIC CONTRACTORS

Shiva Traders

M/s Kartar Singh Construction Co.

B S ENTERPRISES

M/s Hoti Lal Contractor

BHARDWAJ CONSTRUCTIONS