Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹90.6 LAccepted-AOC KOLHAPUR MAHARASHTRA MH | ₹90.6 L | L1 | Accepted-AOC Lowest Rate Quoated |
| 2 | L2₹93.1 LRejected-AOC KASLIWAL COMPLEX VIDYAVIKAS PUBLIC SCHOOL TILAK NAGAR CHOWK NANDED | NANDED | NANDED | MAHARASHTRA | ₹93.1 L | L2 | Rejected-AOC Second Lowest Rate Quoated |
| 3 | L3₹93.2 LRejected-AOC 12TH FLOOR PLOT NO 26A OFFICE NO 1201 THE LANDMARK CO OP HSG SOC LTD KHARGHAR NAVI MUMBAI RAIGAD 410210 | NAVI MUMBAI | RAIGAD | MAHARASHTRA | 410210 | ₹93.2 L | L3 | Rejected-AOC Highest Rate Quoated |
| Sl No | Description | Qty | Unit | Shri B G Bhaskary Nanded L2 | Narayan Ramrao Tamanna L1 | SAI CONSTRUCTION L3 |
|---|---|---|---|---|---|---|
| 1.00Shed | ||||||
| 2.00 | Excavation for foundation in earth, soils of all types, sand gravel and soft murum, including the removing the excavate material up to a distance of 50 meter beyond the building area preparing the bed for the foundation and necessary back filling ramming watering (including shoring and strutting etc complete life up to 1.50metre).(Item No. 21.02 BDA 1 ; Page.No.197) | 10.37 | Cum | 195 ₹2,021.76 | 194.7 ₹2,018.65 | 196 ₹2,032.13 |
| 3.00 | Excavation for foundation in hard murum including removing the excavated material ---etc. complete (Item No.21.06 BDA 2 Page.No.197) | 20.74 | Cum | 221 ₹4,582.66 | 220.66 ₹4,575.61 | 222 ₹4,603.39 |
| 4.00 | Filling in plinth and floors with contractors soil ,sand or murum in 15cm to20cm (Item No.21.37 BDA 11 Page.No.201) | 66.95 | Cum | 1,435 ₹96,071.82 | 1,434.88 ₹96,063.78 | 1,436 ₹96,138.76 |
| 5.00 | Providing and laying in situ cement concrete in 1:3:6 of trap/ granite /quartzite /gneiss metal for foundation and bedding --- etc. complete. (Item No.24.01 BDE 1B Page.No.226) | 1.73 | Cum | 1,435 ₹2,479.68 | 1,434.88 ₹2,479.47 | 1,436 ₹2,481.41 |
| 6.00 | Providing and laying in situ. Cement concrete M-15/1:2:4 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water manually , formwork, compacting, curing etc. complete. Bd.E.1 Page No.287 (I.no.24.16, p.no.229) | 11.56 | Cum | 6,940 ₹80,247.22 | 6,939.58 ₹80,242.36 | 6,941 ₹80,258.78 |
| 7.00 | Providing and laying insitu c.c. M-20 of trap/ for footing ..etc.complete.(Item No.25.11 BDF 3 Page.No.230) | 3.69 | Cum | 8,383 ₹30,966.80 | 8,382.72 ₹30,965.77 | 8,384 ₹30,970.50 |
| 8.00 | Providing and casting in situ cement concrete M-20 of trap/ geanite /quartzite gneiss metal for reinforced -cement concrete columns - etc. complete. (Item No.25.31,BDF 5 Page.No.232) | 5.47 | cum | 2,031 ₹11,109.57 | 2,030.78 ₹11,108.37 | 2,031 ₹11,109.57 |
| 9.00 | Providing and casting in situ cement concrete M- 20 of trap/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels ….etc complete. (Excluding reinforcement )(8.50 bag/cum)(Item No.25.50 BDF 6A Page.No.234) | 3.18 | Cum | 318 ₹1,011.24 | 317.42 ₹1,009.40 | 319 ₹1,014.42 |
| 10.00 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)(Item No.25.70 BDF 8 Page.No.236) | 0.5 | Cum | 4,640 ₹2,306.08 | 4,639.76 ₹2,305.96 | 4,641 ₹2,306.58 |
Tender Value
₹90.6 L
Closing Date
10 Jan 2026, 1:00 pmClosed
Shramsafalya Shivalay Agro Producer Co. Ltd.
Shramsafalya Shivalay Agro Producer Co. Ltd. Taroda (Kh) Tq Dist Nanded
Construction of Shed 74.38 Sq.M and Godown 672.26 MT
2025_DOAWB_1258163_1
SMART/DIU NANDED/SHRAMSAFLYAAPC/WORKS-1
Open Tender
Civil Works
365 days
Gut no.159 sayal Tq Dist Nanded
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Exempted
Project Director ATMA SMART PROJECT office Nanded
13 Mar 2026
12 Dec 2025
12 Jan 2026
12 Dec 2025
10 Jan 2026
12 Dec 2025
23 Dec 2025
Excavation for foundation in earth, soils of all types, sand gravel and soft murum, including the removing the excavate material up to a distance of 50 meter beyond the building area preparing the bed for the foundation and necessary back filling ramming watering (including shoring and strutting etc complete life up to 1.50metre).(Item No. 21.02 BDA 1 ; Page.No.197)
Excavation for foundation in hard murum including removing the excavated material ---etc. complete (Item No.21.06 BDA 2 Page.No.197)
Filling in plinth and floors with contractors soil ,sand or murum in 15cm to20cm (Item No.21.37 BDA 11 Page.No.201)
Providing and laying in situ cement concrete in 1:3:6 of trap/ granite /quartzite /gneiss metal for foundation and bedding --- etc. complete. (Item No.24.01 BDE 1B Page.No.226)
Providing and laying in situ. Cement concrete M-15/1:2:4 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water manually , formwork, compacting, curing etc. complete. Bd.E.1 Page No.287 (I.no.24.16, p.no.229)
Providing and laying insitu c.c. M-20 of trap/ for footing ..etc.complete.(Item No.25.11 BDF 3 Page.No.230)
Providing and casting in situ cement concrete M-20 of trap/ geanite /quartzite gneiss metal for reinforced -cement concrete columns - etc. complete. (Item No.25.31,BDF 5 Page.No.232)
Providing and casting in situ cement concrete M- 20 of trap/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels ….etc complete. (Excluding reinforcement )(8.50 bag/cum)(Item No.25.50 BDF 6A Page.No.234)
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)(Item No.25.70 BDF 8 Page.No.236)
Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)(Item No.26.05 BDF 9 Page.No.239)
Providing & fixing in position T.M.T.bar reinforcement of various diameters for reinforced cement concrete pile caps, footing, foundation, slabs, beams, columns, canopies, stair case, newels, chajjas, lintels, pardis, copings, fins, arches -etc. complete .(Item No.26.33, BDF 17A Page.No.245)
Providing masonry with conventional/ Indian standard type bricks in c.m. 1:6 in foundation and plinth –etc. complete. (Item No.27.03 BDG 1 Page.No.254)
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete.(Item No.27.05 BDG 1 Page.No.254)
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.(Item No.32.11 BDG 7 Page.No.269)
Providing internal cement plaster 12 mm. thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces etc.complete. (Item No.32.03 BDL 2 Page.No.268)
Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete (Item No.40.01 BDU 1 Page.No.338)
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box (Item No.39.39 ,BDT Page.No.322)
Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. (Item No.35.15 , Page.No.287)
Providing and applyingwashable oil bound distember of approved colourand shade to old and new two coats, including scaffolding if necessary, cleaning and preparing the surfacecomplete. Complete .(I.no.36.11,,p.no.291)item code- BDp5A-p.no.413
provding and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil paintig complete.Bd.c.3 page No.275,( I.No.23.01,P.no.223)
Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.). (I.No.38.05,P.No.297)
itemH3Code30
Excavation for foundation in earth, soils of all types, sand gravel and soft murum, including the removing the excavate material up to a distance of 50 meter beyond the building area preparing the bed for the foundation and necessary back filling ramming watering (including shoring and strutting etc complete life up to 1.50metre) 21.02/148
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means 21.06/148
Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means 21.10/148
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI 24.01/169 Grade)
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. 27.03/189
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 26.33/182
Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 25.11/172
Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 25.31/173
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 25.50/175
Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 26.05/178
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant
(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 25.7/176
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 27.05
Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.32.12/201
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.32.04/201 32.34/210
Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. 32.07/202 32.21/209
Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. 36.03/218
Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 35.25/217
Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 35.12/216
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box 39.40/238
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. 39.68/238
Providing and fixing M.S. grill door 24 Kilogram/Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc 39.31/239
Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) 39.24/238
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. 21.36/152
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 21.37/152
Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. 2.31/29
Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.21.40/152
Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. 50.59/334
Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. 33.30/208
Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for 5km lead stat.
Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profil
Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP.
itemH3Code31
itemH4Code2
itemH4Code3
Warehouse Royalty
METAL
itemH5Code3
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
tenderdoccc.pdf
Tender Documents • 0.99 MB
BOQ_2168589.xls
BOQ • 0.50 MB
Download all tender documents and submit your bid