GE (N) P/TOKEN- 63 OF 2025-2026 REPAIR MISC E/M ITEMS AT KOLHAPUR MILITARY STATION UNDER GE (NORTH) PUNE

Amount

Excavation in trenches not exc.1.5 m wide and not exc.1.5 m in depth for foundation etc. for laying of UG cable/ pole/ stays etc and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exc.1.5 m wide and exc.1.5m but not exc.3.0m in depth for foundation etc. for laying of UG cable/ pole/ stays etc and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed.

Taking down/ out unserviceable UG cables of any cross sectional area and connections and joints including pipes, bricks, etc of any description laying in trenches or fixing with walls/ poles, complete all as directed. Note : Earthwork will be measured and paid separately under relevant item.

Supply, laying and testing of LT underground XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade, laid in trenches/ surface of wall/ in GI pipe along with pole for connection to OH lines including brass cable glands mild steel flat iron clamps etc of size 10 Sqmm 2 core complete all as specified and as directed. (Note : Earthworks, sand cushioning, bricks, GI protection pipe etc. will be measured and paid separately under relevant items.)

All as per serial item No.07 here-in-before but for size16 Sqmm 4 core.

All as per serial item No.07 here-in-before but for size 25 Sqmm 4 core.

All as per serial item No.07 here-in-before but for size 35 Sqmm 3.5 core.

Supply and fix in repair for 50mm dia galvanised iron pipe light grade as in protection of UG Cable laid in trenches including necessary MS clamp, nuts, bolts and painting complete all as specified and as directed. Note: Earth work shall be measured and paid separately

Supply and fix in repair for 40mm dia galvanised iron pipe light grade as in protection of UG Cable laid in trenches including necessary MS clamp, nuts, bolts and painting complete all as specified and as directed. Note: Earth work shall be measured and paid separately

Trimming of tree branch, girth not exc. 50 mm around OH electric lines and cleaning upto 3.00 metres from the OH electric lines, removing trimmed branches from site(s) and stacking as ordered complete all as specified and as directed.

Trimming of tree branch, girth exc. 50 mm but not exc. 100 mm around OH electric lines and cleaning upto 3.00 metres from the OH electric lines, removing trimmed branches from site(s) and stacking as ordered complete all as specified and as directed.

Trimming of tree branch, girth exc. 100 mm but not exc. 150 mm around OH electric lines and cleaning upto 3.00 metres from the OH electric lines, removing trimmed branches from site(s) and stacking as ordered complete all as specified and as directed.

S & F Junction Box for Street Lights of size 250 x 200 x 105 mm made out of SMC totally enclosed, dust, shock, rust and vermin proof, Rot proof and termite resistant, cable entry/out from bottom, 100 % weather proof, Locking door arrangement with gaskat, water tight IP 42 protection single leaf shutter in front having proper locking arrangements with suitable size of "connectwell" stud teriminal (provision for socket bolting)- 05 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts including removal of exiting unsv all as specified and directed. Make : Hensel, Sintex or Equivalent as per App 'A' as approved by GE

Repair/Maintenance of high mast light 15 Metre height, oiling of motor of wench, repairing/renewal of burnt out cables, CG box, luminaire and made it functional all as specified and as directed. Note : (i) Components & parts to be replaced will be measured and paid separately. (ii) Worn out components will be measured and paid separately under relevant items of schedule.

Supply only Copper conductor cable 10 sqmm x 4 core, 650 V/1100 V, un-armoured all as specified and as directed.

M&L for rewinding of winch motor of high mast light with super enamelled copper conductor and insulating material all as specified and as directed.

S&F in repair bracket made of GI pipe light grade 40mm bore bent to shape as required at site for street light fitting 1.2 m in length and fixed on wall/pole including necessary MS clamps, nuts, bolts long as per size of fitting, bent to required shape as required duly painted with two coats of aluminum paint over a coat of red oxide zinc chrome primer including taking down old unserviceable bracket comlete all as specified and as directed. Note : Cost of mild steel clamp, nuts, bolts and painting is deemd to be included in the quoted unit rate.

Supply and fix in repair energy saving new generation environmental friendly long life with peanut lenses versatile presure die cast aluminium IP 66 security/ street light fitting luminaire with high power LEDs as light source and electronic driver of capacity 120 watts with 120 lumens per watt out put not less than 14400 lumens with pre wired and provision of 4 sq mm twin core copper conductor cable multi stranded from fitting to over head line including taking down old unserviceable street/ security light fitting form electric pole of any description complete all as specified and as directed. Make JAQUAR Cat No. LSRTTOS120XC or equivalent of make Philips, Wipro, Havells as approved.

Supply and fix for energy saving new generation environmental friendly long life with peanut lenses versatile presure die cast aluminium IP 66 security/ street light fitting luminaire with high power LEDs as light source and electronic driver of capacity 90 watts with 120 lumens per watt out put not less than 10800 lumens with pre wired and provision of 4 sq mm twin core copper conductor cable multi stranded from fitting to over head line including taking down old unserviceable street/ security light fitting form electric pole of any description complete all as specified and as directed. Make JAQUAR Cat No. JAQUAR LSRTTOS090XC or equivalent of make Philips, Wipro, Havells as approved

Supply and fix for energy saving new generation environmental friendly long life with peanut lenses versatile presure die cast aluminium IP 66 security/ street light fitting luminaire with high power LEDs as light source and electronic driver of capacity 60 watts with 120 lumens per watt out put not less than 7200 lumens with pre wired and provision of 4 sq mm twin core copper conductor cable multi stranded from fitting to over head line including taking down old unserviceable street/ security light fitting form electric pole of any description complete all as specified and as directed. Make JAQUAR Cat No. LSRTTOS060XC or equivalent of make Philips, Wipro, Havells as approved.

Supply and fix for energy saving new generation environmental friendly long life with peanut lenses versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with lumens out put not less than 2500 lumens with pre wired and provision of 4 sq mm twin core copper conductor cable multi stranded from fitting to over head line including taking down old unserviceable street/ security light fitting form electric pole of any description complete all as specified and as directed. Make JAQUAR Cat No. LSRUMPOO25XW or equivalent of make Philips, Wipro, Havells as approved.

Supply and fix for energy saving new generation environmental friendly long life with peanut lenses versatile presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire with secondary optics, high power LEDs as light source and electronic driver of capacity 200 watts with lumens out put not less than 20000 lumens with pre wired suitable for sports lights and provision of new 3 core multistranded copper conductor of size 23/0.193 for connection including taking down of old unserviceable fitting complete all as specified and as directed. Make: JAQUAR Cat No. LFLDSLM200XC or equivalent of make Bajaj , Philips, Wipro, Havells, CG as approved

Supply and fix for energy saving new generation environmental friendly long life with peanut lenses versatile presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire with secondary optics, high power LEDs as light source and electronic driver of capacity 120 watts with lumens out put not less than 12000 lumens with pre wired suitable for sports lights and provision of new 3 core multistranded copper conductor of size 23/0.193 for connection including taking down of old unserviceable fitting complete all as specified and as directed. Make: JAQUAR Cat No. LFLDSLM120XC or equivalent of make Bajaj , Philips, Havells, CG as approved .

Supply and fix for energy saving new generation environmental friendly long life with peanut lenses versatile presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire with secondary optics, high power LEDs as light source and electronic driver of capacity 100 watts with lumens out put not less than 10000 lumens with pre wired suitable for sports lights and provision of new 3 core multistranded copper conductor of size 23/0.193 for connection including taking down of old unserviceable fitting complete all as specified and as directed. Make: JAQUAR Cat No. LFLDSLM100XC or equivalent of make Bajaj , Philips, Havells, CG as approved .

Supply and fix for energy saving new generation environmental friendly long lifewith peanut lenses versatile presure die cast housing and heat sink in aluminium extrusion IP 66 flood light fitting luminaire with secondary optics, high power LEDs as light source and electronic driver of capacity 50 watts with lumens out put not less than 5000 lumens with pre wired suitable for sports lights and provision of new 3 core multistranded copper conductor of size 23/0.193 for connection including taking down of old unserviceable fitting complete all as specified and as directed. Make: JAQUAR Cat No. LFLDSLM50XC or equivalent of make Bajaj , Philips, Havells, CG as approved .

M&L for painting of steel tubular pole including cable protection pipe and all iron parts of 9 mtr long pole complete with 2 coats of aluminium paint after cleaning all rust and dust and preparing surface with wire brush and including strips of white and red colour of synthetic enamel paint up to the height of 1.5 mtr from the bottm of the pole complete all as specified and as directed. Make : Nerolac/Asian paint Note:- Rent for hydra is included in rates quoted by the contractor.

Supply and fix for surface mounting 24 hours Analog Time Switches, shortest switching time 30 min., 240 Volt, 50 Hz, One module, and suitable for single street light fitting in existing panel including necessary electrical connections including taking down old unserviceable one complete all as specified and as directed. Make Legrand, Havells, L & T, Schneider.

S & F Bush and spike LED light with die cast aluminium housing with transparent glass diffuser fitting of capacity 8 watts and IP 66 protection including taking down old unserviceable light any type complete all as specified and as directed Make : JAQUAR Cat No LSPKR108XW or equavalent in Bajaj, Philips, Wipro, Havells.

S & F for LED Post top lantern 15 watt light fitting New generation, energy saving, environmental friendly, long life aesthetically designed Die cast aluminium housing, frosted PC di user, IP54 with high power LED as light source complete with all accessories fixed on GI pipe 40mm dia including removal of old unserviceable one complete all as specified and directed. Make : JAQUAR Cat part No. MONACO 340.33.NGG, BAJAJ Cat part No. BGCTN 25 W LED WW, Halonix cat part No. Cat part No. HLPT-SO4-25-CW or Shakti Cat part No. SZPGPMX025.

Supply and fix in repair GFRP Translucent LED Bollard not less than 3 watt, 0.75 Mtr Height cylindrical shape with base plate, of average height 0.75 mtr, with top OD and bottom OD 100mm, overall thickness of 5 mm using E class content of 65 to 40 percent, specific gravity 1.42 g/cc, Di electric strength 40 kv/mm, Tensile strength of 80k/Jms, barcol hardness of 45 BHU, Tensile modulus of 9000 eleasicity 22918 N/mm2 wind speed sustainability ot be 150 KMPH flammability test ehich confirms to VO rating of UL94, poles ot be finished on the ouside with UV inhibitors in accordance with ASTM G 145, TUV certification , batch wise test report, Customized LOGO incorporation . Make CNC TECHNICS PVT LTD ( RE ENSOURCE) CAP PART NO CTRF-0.75-90

Supply of SOLAR LED light 12 W Integrated all-in-one solar street light with 2000 lumens & lithium ferro phosphate battery, solar panel and charger built into the luminaire. Pressure die cast aluminium for sturdiness and long life. Specially designed pole mounting bracket allows different tilt angles, lateral and pole top mounting. SunStay with system efficacy of more than 175 lm/W. as per tender specs with L shape Clamp including including 3 inch pole, 6 mtr height with PCC work as per ground condition incl removal of old unserviceable one any type fiitings complete all as specified and directed. Note:- Contractor has to submit NABL test lab report LM79 conforming above specifications as make approved by Department Incharge with 05 yeras of warranty for complete system.

Supply of SOLAR LED light 18 W Integrated all-in-one solar street light with 2000 lumens & lithium ferro phosphate battery, solar panel and charger built into the luminaire. Pressure die cast aluminium for sturdiness and long life. Specially designed pole mounting bracket allows different tilt angles, lateral and pole top mounting. SunStay with system efficacy of more than 175 lm/W. as per tender specs with L shape Clamp including 3 inch pole, 6 mtr height with PCC work as per ground condition incl removal of old unserviceable one any type fiitings complete all as specified and directed. Note:- Contractor has to submit NABL test lab report LM79 conforming above specifications as make approved by Department Incharge with 05 yeras of warranty for complete system.

S & F in repair decorative LED bollard 10 watts inverted prism type with aluminium die casting, with adequate size elecrical connections complete all as specified and as direced . Mame Halonix cat part No HLOB-95-10-WW-01 (LLDO03139), CROMPTION CAT PART NO. LBLS1-10-CDL

Supply and fix in repair for energy saving new generation environmental friendly with remote control long life versatile presure die cast aluminium body and clear cover, standard beam angle of 30 Deg aesthetic consistency in multi purpose application heat sink in aluminium extrusion mono colour flood light fitting luminaire offer- Red, Green, Blue and Warm white colour with secondary optics, high power LEDs as light source and electronic driver of capacity 50 watts with lumens out put not less than 5000 lumens with pre wired suitable provision of new 3 core multistranded copper conductor of size 23/0.193 for connection including taking down of old unserviceable fitting complete all as specified and as directed. Make: SYSKA , JAQUAR, Bajaj , Philips, Havells, CG as approved .

Taking down/out unserviceable street light/bollards/fllod light/gate post fitting any type from the pole any type any height and checking electrical connections, joints, carrying out repairs like change of driver, reconnection of connectors at site including replacement of under mentioned spares cost and refixing the same on its place, testing complete all as specified and as directed. Note :The spares of the fitting will be paid separatly under relavant items as supply only.

Supply only driver suitable for LED street/flood Light Fitting of compatible capacity 15 watts. Make Jaquar, Bajaj, Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street/flood Light Fitting of compatible capacity 45 watts. Make Jaquar, Bajaj, Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street/flood Light Fitting of compatible capacity 60 watts. Make Jaquar, Bajaj, Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street/flood Light Fitting of compatible capacity 72 watts. Make Jaquar, Bajaj, Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street/flood Light Fitting of compatible capacity 90 watts. Make Jaquar, Bajaj, Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street/flood Light Fitting of compatible capacity 120 watts. Make Jaquar, Bajaj, Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street/flood Light Fitting of compatible capacity 150 watts. Make Jaquar, Bajaj, Crompton Greaves/ Imperial/ Syska/ Shakti.

Supply only driver suitable for LED street/flood Light Fitting of compatible capacity 200 watts. Make Jaquar, Bajaj, Crompton Greaves/ Imperial/ Syska/ Shakti.

Taking down old unserviceable feeder pillar box of any type, Supply, fixing, testing and commissioning of LT feeder pillar panel double door floor mounted outdoor type, as per IP-65 grade, made out of CRCA sheet 3.00 mm thick of outer body and 2 mm of internal thickness of suitable size with aluminium bus bar 400 Amps, 4 strip (3 phase & Neutral) complete drilled, insulated with colour coded insulation tape, mounted on insulators etc with RYB indicator, internal wiring with suitable size of copper wire, panel should be dust proof, vermin proof, powder coated , locking should be screw type, mechanical type, inter locking, should have danger notice for 415 volts, AC, mounted on 50x50x6 mm angle iron frame having minimum 2 feet ground clearance duly embedded in and including PCC block (1:2:4) type B-1 foundation for fixing of panel complete including termination of all incoming and outgoing cables with suitable size thimbles/lugs and glands, Nuts & Bolts, Washers complete with comprising of following and including: -

Incoming

(a) MCCB, 4 Pole, 415 Volts, 250 Amp, adjustable Thermal Magnetic relay with breaking capacity 36 KA at 415 volts Ics=100% Icu -01 No Make . ABB, Seimens, L & T, Schneider, BCH, Havells, Legrand.

(d) Indicator lamp LED type (R,Y,B) complete with bakalite fuse fitting - 01 Set

Outgoing

(b) MCCB 3 pole, 63 Amp, adjustable Thermal Magnetic relay with breaking capacity 16 KA at 415 volts Ics=100% Icu - 01 No Make . ABB, Seimens, L & T, Schneider, BCH, Havells, Legrand.

(c) MCB 40 Amps, TP, adjustable Thermal Magnetic relay with breaking capacity 16 KA at 415 volts Ics=100% Icu - 10 Nos

(d) Provision for space to be kept blank for fixing of MCCB - 01 No

Note :- Installation, testing, commissioning and connecting of incoming and outgoing cables connections LT feeder pillar panel is included in rates quoted. All fixing material like thimble, Glands, Nuts & Bolts are included in unit rate. Earthing strip to be connected with feeder pillar box with suitable size Nuts & Bolts.

Taking down old unserviceable feeder pillar box of any type, Supply, fixing, testing and commissioning of LT feeder pillar panel double door floor mounted outdoor type, as per IP-65 grade, made out of CRCA sheet 3.00 mm thick of outer body and 2 mm of internal thickness of suitable size with aluminium bus bar 400 Amps, 4 strip (3 phase & Neutral) complete drilled, insulated with colour coded insulation tape, mounted on insulators etc with RYB indicator, internal wiring with suitable size of copper wire, panel should be dust proof, vermin proof, powder coated , locking should be screw type, mechanical type, inter locking, should have danger notice for 415 volts, AC, mounted on 50x50x6 mm angle iron frame having minimum 2 feet ground clearance duly embedded in and including PCC block (1:2:4) type B-1 foundation for fixing of panel complete including termination of all incoming and outgoing cables with suitable size thimbles/lugs and glands, Nuts & Bolts, Washers complete with comprising of following and including: -

Incoming

(a) MCCB, 4 Pole, 415 Volts, 250 Amp, adjustable Thermal Magnetic relay with breaking capacity 36 KA at 415 volts Ics=100% Icu -01 No Make . ABB, Seimens, L & T, Schneider, BCH, Havells, Legrand.

(d) Indicator lamp LED type (R,Y,B) complete with bakalite fuse fitting - 01 Set

Outgoing

(b) MCCB 3 pole, 63 Amp, adjustable Thermal Magnetic relay with breaking capacity 16 KA at 415 volts Ics=100% Icu - 06 No Make . ABB, Seimens, L & T, Schneider, BCH, Havells, Legrand.

(c) MCB 40 Amps, DP, adjustable Thermal Magnetic relay with breaking capacity 16 KA at 415 volts Ics=100% Icu - 10 Nos

(d) Provision for space to be kept blank for fixing of MCCB - 01 No

Note :- Installation, testing, commissioning and connecting of incoming and outgoing cables connections LT feeder pillar panel is included in rates quoted. All fixing material like thimble, Glands, Nuts & Bolts are included in unit rate. Earthing strip to be connected with feeder pillar box with suitable size Nuts & Bolts.

Supply & erecting Hot-Dip Galvanized (HDG) Octagonal Poles for Street Lighting in single section of 5 Mtr. height ,Top – 70mm dia, Bottom – 130mm dia and 3mm thickness sheet. Base plate of minimum dimension 200mm X 200mm X 12 mm, including foundation bolts (4 nos with 3 nos of nuts and washers in each), with decorative single arm bracket for mounting the light fittings 1000 mm long, bent at an angle of 120 degree, with necessary holding brackets, hold fasts etc, bakelite sheet with one 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection, complete all as specified and as directed NOTE : Earthwork, Cement Concrete for foundation , etc. will be measured and paid under approprite Items. Make - Bajaj Type BOP-5030 or Equivalent )

Supply & erecting Hot-Dip Galvanized (HDG) Octagonal Poles for Street Lighting in single section of 6 Mtr. height ,Top – 70mm dia, Bottom – 130mm dia and 3mm thickness sheet. Base plate of minimum dimension 200mm X 200mm X 12 mm, including foundation bolts (4 nos with 3 nos of nuts and washers in each), with decorative single arm bracket for mounting the light fittings 1000 mm long, bent at an angle of 120 degree, with necessary holding brackets, hold fasts etc, bakelite sheet with one 6A SP MCB and stud connector ( 4 nos) inside the pole at door opening for cable connection, complete all as specified and as directed. NOTE : Earthwork, Cement Concrete for foundation , etc. will be measured and paid under approprite Items. Make - Bajaj Type BOP-6030 or Equivalent )

Supply and fix for MCCB, 4 pole, 415 Volts, Adjustable type with thermal magnetic release (DL range), 63 Amps with breaking capacity 35 KA, Ics = 100% Icu with suitable fixing arrangement in the panel with refixing the existing cable including removal of old unserviceable one complete all as specified and as directed. Make: L&T, Schneider, ABB as approved.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 100 (A) breaking capacity 25 KA , Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 125 (A) breaking capacity 25 KA, Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 160 (A) breaking capacity 25 KA , ,Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 200 (A) breaking capacity 25 KA , Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

S&F MCCB 4 Pole, 415 Volts, with Thermal release range 250 (A) breaking capacity 36 KA , Ics = 100% Icu, Thermal Magnetic : O/L & S/C protection, connecting cables of any size, testing and taking out unserviceable one from panel , complete all as specified and as directed.

M&L cable end jointing kit outdoor termination heat shrinkable type complete with Jointing materials with all accessories suitable for XLPE 11 KV (Earthed), 3 Core, armoured aluminium conductor cable of size 70 Sqmm to 95 Sqmm complete all as specified and as directed

S&F Straight Through Joints (Epoxy Type) including Jointing Kit complete for making Joints suitable for LT UG XLPE Aluminium Conductor electric Power Cable of size 16 Sqmm to 25 Sqmm, 4 Core,1100 Volt grade complete all as specified and as directed.

S&F Straight Through Joints (Epoxy Type) including Jointing Kit complete for making Joints suitable for LT UG XLPE Aluminium Conductor electric Power Cable of size 35 Sqmm to 70 Sqmm, 4 Core,1100 Volt grade complete all as specified and as directed.

Material and labour for PVC flat twin core 2.5 sq mm aluminium wire 1100 volt grade laid in 20 mm dia medium grade rigid PVC conduit (and fixing brackets on PCC pole) from Loop-in-loop out junction box to light fitting terminal complete all as specified and as directed. Note :- PVC conduit shall be clamped properly with suitable clamps and no extra payment will be done on this account.

Material and labour for PVC flat twin core 6 sq mm aluminium service wire 1100 volt grade complete all as specified and as directed.

Material and labour for PVC flat twin core 10 sq mm aluminium service wire 1100 volt grade complete all as specified and as directed.

S & F for wall mounted LED 06 watts (WW), 3000K with good color rendering (CRI>70) picture light fitting, 230 volts with durable aluminium housing and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, complete all as specified and as directed. Make :-Philips model No. 30973 or its equvalent in Havells, Bajaj.

Supply and fix in repair COB downlights with clear glass round/square type 12 watt suitable for operation on 230 volt 50 Hz AC Recess-mounted, COB-based, round LED downlight with 60 beam angle as per sample including removal of old unserviceable one complete all as specified and as directed.

Supply and fix in repair FOCUS LIGHT in replacement of unserviceable focus light 20 watt with white or black finish as required at site complete with all accessories internally pre wired and necessary mounting arrangements, complete all as specified and as directed.

Supply and fix in repair for factory made street light control panel, with and including all accessories such as control switch, contactor, automatic control relay, pre-wired etc. fixed on fabricated angle iron channel or suitable sizee and grounting on floor, time lite-32/40 Amps, 3 pole 415 volts- Astromical time switch (Suitable for pune area) Make cat part No IHXTS0306A Indo - Asian Cat part No. TLO32ASO or equivalent in C & S

Attending daily 24 Hours Complaints for street light/ Gardern light/ Gate light and connected street light cable, loose connection of Street lgiht cable and lights, Lugs and 4 pole connector and street lights of the pole any type any height and checking electrical connections, joints, carrying out repairs like change of small , reconnection of connectors at site including replacement of under mentioned spares cost and refixing the same on its place, testing complete all as specified and as directed.

S & F in repair flexible LED strips with optimium brightness & uniformity of light for protect cove lighting White/WW 05 mtr length 05 watt IP 65 New generation, energy saving, environmental friendly, long life with suitable driver complete with all accessories including removal of old unserviceable one complete all as specified and directed. Make : JAQUAR Cat No LGTP01X012XW Bajaj Cat part No BGCL 40 W LED WH or its equavalent in Philips, Wipro.

Supply and ixing in repair PVC insulated and sheathed 1100 Volt grade of copper cable of size 2 sqmm 3 core compleate with lugs all as specified and as directed by Engineer-in- charge.

Supply and ixing in repair PVC insulated and sheathed 1100 Volt grade of copper cable of size 4 sqmm 3 core compleate with lugs all as specified and as directed by Engineer-in- charge.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

SHRIYA CONSTRUCTION (BID ID -3484724)

SOURABH ENGINEERS (BID ID -3485877)

GULMOHAR CONSTRUCTION (BID ID -3484667)

Vishwas Electricals And Sons (BID ID -3490966)