Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹15.2 L+₹2.2 L (16.8%)Rejected-Finance | L2 | Rejected-Finance Awarded being 2nd Lowest Bidder | |
| 3 | L3₹19.9 L+₹6.9 L (53.5%)Rejected-Finance | L3 | Rejected-Finance Awarded being 3rd Lowest Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
20 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S K Yadav GE(S) BATHINDA
GE(S) BATHINDA BATHINDA MIL STN
GE(S) BTD TOKEN NO 46 OF 2022-23 COMPREHENSIVE MAINTENANCE INCLUDING ATTENDING DAY TO DAY COMPLAINTS REPAIR REPLACEMENT OF JOINERY TANK CLEANING AND CERTAIN OTHER MISC WORK TO VARIOUS BLDGS OF SECTOR V (OTM ACCN) UNDER AGE BR I UNDER GE (S) AT BATHIN
2022_MES_564609_1
GE(S)/BTD/TOKEN NO 46 OF 2022-23
Open Tender
Civil Works - Canal
Item Rate
180 days
GE(S)Bathinda
Class E
category a(i)
11 documents required · 11 mandatory
₹500
GE(S)Bathinda
₹40,000
Yes
24 Jan 2023
22 Nov 2022
22 Dec 2022
22 Nov 2022
20 Dec 2022
6 Dec 2022
Amount
Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M & L 75mm thick, cement concrete 1:3:6, type C2 (40mm graded aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) complete all as specified and directed.
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.
M&L brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M & L 15 mm thick rendering in CM (1:6) on brick surfaces or conc surfaces on walls and finished even and smooth without using extra complete all as specified and directed.
M & L 15 mm thick rendering in CM (1:4) using water proofing compound as per manufacturerer's instruction (WPC to be measured & paid separately) on brick work or concrete surfaces and finished even and smooth without using extra complete all as specified and directed.
M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces such as ceiling or soffits of chhajas etc; finished even and smooth without using extra complete all as specified and directed.
Supply only integral water proofing compound of approved quality complete all as specified and directed.
M & L for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including preparation of these surfaces and matching the colour/tint with existing surfaces complete all as specified and directed.
M &L for applying two coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed.
M&L for applying two coats of oil bound destemper ( to match with the adjacent shade or tint) over a coat of primer on newly plastered wall surfaces including applying wall putty to make up depression etc and to the surface even & smooth including preparation of these surfaces complete all as specified and directed.
M&L applying three coat of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directred.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Roughning of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, complete all as specified and directed.
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed.
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified and directed.
M & L glazed ceramic coloured tiles of approved quality in vertical surfaces 350mm X 250 mm x7mm/450 x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.
S&F in repairs Mild steel galvanised wire cloth 0.36mm nominal dia of wire and 1.40 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed.
S & F in repairs 300mm mild steel ordinary rat tail rod springs, including roller & roller plate complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.
S & F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm in each pane complete all as specified and directed.
S & F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane complete all as specified and directed.
S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.50 Sqm in each pane complete all as specified and directed.
S&F in repairs tank nipple of 20mm dia complete all as specified and directed.
M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed.
S & F in repairs soap dish stainless steel of size 150mm x 100mm x 0.9mm thick , complete all as specified and directed.
S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed.
Taking down or up 15 mm bore galvanised iron tubing and connection complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing and connection complete all as specified and directed.
S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.
S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.
S & F in repairs 15mm bore brass bib taps , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with o without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F in repairs PVC lid (cover) for 500 to 1000 ltr capacity PVC water tanks with hinging & lockng arrangement complete all as specified and directed.
S & F in repair ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe(weight 210 gms Minimum) complete all as specified and directed.
S & F in repair ball valve 25mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (weight 455 gms Minimum) complete all as specified and directed.
S & F in repairs, brass chromium plated shower rose 125mm dia, with swivel joints & and arms, and fixing to pipe & union complete all as specified and directed.
S & F in repairs 15mm bore, fancy type , chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle,screwed both ends for iron pipe complete all as specified and directed.
S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed.
S & F in repair 10 liter PVC valveless, syphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed.
S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified and directed.
S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed.
S&F in repairs stainless steel plate racks of size 900mmx600mmx250mm and thickness of SS strip 1mm, fixed on wall etc complete all as specified and directed.
S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.
S & F in repairs 15mm bore fancy type chromium plated bib taps, quarter turn cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.
S & F in repairs 32/40mm waste fittings for stainless steel sink(sink coupling) , brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.
S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed.
S & F in repairs 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps etc complete all as specified and directed.
S & F 110 mm bore, PVC (SWR) fittings such as bends of any radious, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.
Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or any type and re-fixing the same after minor repairs such as replacement of washers etc or complete all as specified and directed (any major parts such as jumpers brass/ spindles/ caps etc required to be replaced, shall be measured as supply only and paid for accordingly)
Supply and fixing in repairs 15mm bore bib cock PTMT standard of any colour, high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed.
Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass complete all as specified and directed. (Note:- fixing including in item No. 55 here-in-before)
Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed. (Note:- fixing including in item No. 55 here-in-before)
Supply only capstan head / cap of CP bib tap / CP stop cock 15 mm size complete all as specified and directed. (Note:- fixing including in item No. 55 here-in-before)
S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.
Fixing only in repair vitreous china wash basin, of any description & size, excluding taps, wastes but including brackets complete all as specified and directed.
S&F in repair 32mm dia PVC flush pipe of polyethene of low or high density for low level cistern and fixed complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories, complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories, complete all as specified and directed.
S & F cast iron, spun pipe, soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, complete all as specified and directed.
S & F cast iron, spun pipe, soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, complete all as specified and directed.
Sealing only joints of cast iron pipes and fittings 75/100mm dia with chemical cement and making the joints leak proof complete all as specified and directed.
S&F in repairs oval access doors to cast iron pipes of 75mm bore with rubber washer packing & bolts & nuts as required complete all as specified and directed.
S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified and directed.
S & F in repairs 100mm bore,CI bends any radius, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed.
S & F in repairs 75mm bore, CI bends any radius, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed.
S & F in 'repair' 100 mm dia Cast Iron Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches with oval acess door complete all as specified and directed.
S & F in repairs mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.
M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed.
S & F in repairs 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S & F in repair 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.
S & F in repairs for PTMT butt hinges 100mm long best quality complete all as specified and directed.
S & F in repairs PTMT barrel tower bolt best quality, 150 mm long complete all as specified and directed.
S & F in repairs PTMT door handles, best quality, 125 mm long complete all as specified and directed.
S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
S&F in repair complete Veta washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed.
Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed.
Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required and shall be paid at supplied only rate separately), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified and directed.
Supply only floor trap 75 mm dia with grating including jointing to waste pipe complete all as specified and directed. (Note:- Fixing including in item No. 86 here-in-before)
Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed.
S&F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
S&F for pressed steel frames of size 75 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) complete all as specified and directed.
S&F 2nd class HW 35mm thick factory made panelled shutters (any number of panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.
M&L for preparation of new wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6 complete all as specified and directed.
S&F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications complete all as specified and directed.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanished mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F for 150 mm long, Aluminium anodised, barrel tower bolt, of extruded section complete all as specified and as directed
S&F 125mm long for Aluminium handles, cast type anodised for cup boards and doors complete all as specified and as directed
M&L for PCC 1:3:6 type C-1 (using 20mm gde stone agg) as in filling of Chowkhats complete all as specified and directed.
S&F for galvanised MS wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S&F steel window or ventilators fixed type with glazing bars complete all as specified and directed
Supply and fixing mild steel framed work such as grills,guard bars, gate, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed
S&F of MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed
S&F for MS, tower bolt, 200 mm long, stove enamelled, black with, bright bolt complete all as specified and as directed
S&F for MS, sliding door bolt, 250 mm long, stove enamelled, black with bright bolt etc complete all as specified and as directed
S&F for MS pressed handles125mm long, oval type stove enamelled black complete all as specified and as directed
M & L framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed
Dismantling boarding any description fixed in any position with rails incl fillets complete all as specified and as directed
S&F 18/19 mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber framed work complete all as specified and as directed
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and as directed
Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and as directed
Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and directed.
Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed.
S&F in repair aluminium (extruded section ) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed
Cleaning of water tanks exc 250 & n. exc 500 ltr capacity removing all scale & dirt, etc., from tanks and from mouths of circulating pipes etc. complete all as specified and as directed
Cleaning of water tanks exc 500 & n. exc 1000 ltr capacity removing all scale & dirt, etc., from tanks and from mouths of circulating pipes etc. complete all as specified and as directed
S&F in repairs 500 litre capacity three layers rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position white in colour complete all as specified and directed.
S&F in repairs 1000 litre capacity three layers rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position white in colour complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed.
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F in repairs health faucet brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.
S&F in repairs Jet spray CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.
S&F in repairs urinal spreader of PTMT any colour for fixing with 15mm dia (Minimum weight 60gms) complete all as specified and directed.
S&F in repairs plastic water closet seat cover white/ivory colour closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repairs 5.5mm thick sheet glass ordinary quality and fitting with PVC rubber beading for door and windows in squares n exc 0.50 sqm in each pane complete all as specified and directed.
S&F in repairs 5.5mm thick sheet glass ordinary quality and fitting with PVC rubber beading for door and windows in squares exc 0.50 sqm in each pane complete all as specified and directed.
S & F in repairs double point panic bar length 950mm and height upto 2400mm complete all as specified and directed.(befor quoted rate for this item please confirm at Sagat Singh Auditorium).
Fixing only in repairs PVC rain water pipes of any descrption, jointing pipe with elbow/pipe joint with chemical cement/suitable adhesive & providing MS clamps of 25 x 3 mm flat iron and fixed with 75 mm long screw with PVC gutties n.exc .1.80 mtr centre to centre distance complete all as specified and directed.
S & F in repair floor machine (size 25cm x 12cm) for glass door including complete taking down of existing glass door opening using aluminium cleats etc.complete all as specified and directed.(befor quoted rate for this item please confirm at Sagat Singh Auditorium).
S & F in repair 12mm thick toughened glass for doors/window including complete taking down of existing glass handles, hinges complete etc. and also including the firm for logo & sign complete all as specified and directed.
S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.
S&F aluminium glazed windows/ventilators with frame of size 123 x 38.10 x 2mm comprising of shutter openable, rails and stiles of Z-sec (33.3 x44x1.3mm) Section No S-382 of Jindal or equivalent of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.
S&F aluminium glazed door with frame of size 100 x45x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.
S&F powder coated aluminium glazed and gauged door with frame of size 100 x33x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.
M&L prelaminated partical board 12 mm thick,interrior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber/ aluminium frame with snap grid complete all as specified and directed.
Repair to aluminum door shutter, window, sliding windows, ventilator partition by replacing joining cleats glazing clips rubber packing andoised aluminum snap beading, screws etc complete all as specified and directed. Note : Sheet glas, particle board will be measured and paid separately if provided at site.
Demolition of re-inforced cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.
Material and labour for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in landings, cover slab (for manholes etc), set in cement mortar (1:4) chullah hoods, chajjas, water troughs mangers, shelves and similar articles with plain faces etc complete all as specified and directed.
M&L for mild steel TMT bars 8 mm dia and over, cut to length bent to shape required including cranking, bending spirally etc and binding with mild steel wire not less than 0.9 mm dia as in reinforcement etc. complete all as specified and directed.
M&L 25mm thick cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and directed.
M&L for Machine cut kota stone slab flooring not less than 18mm thick over & incl 15 mm thick in CM 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of sab including rubbing,grinding and polishing (mirror finish) including demolition of stone slabes and tiles of any decription or thickness and laid, bedded on any morter in floor, apron etc complete all as specified and directed.
M&L for Machine cut kota stoe slab flooring not less than 18mm thick in riser/trends of steps(in Single piece), skirting, dado and pillars over & incl 10 mm thick rendering in 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of sab including rubbing,griding and polishing mirror finish including demolition of stone slabes and tiles of any decription or thickness and laid, bedded on any morter in floor, apron etc complete all as specified and directed.
S & F in repair 4 lever brass mortice lock,vertical type of size100 mm complete all as specified and directed.
M & L 50mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.
Fixing only 600 x 600mm x 4mm thick E Board classic as in false ceiling height for work up to 15 mtr. The rates quoted by the contractor is deemed to be including with necessary scaffolding, safety belts, and other saftey feature complete all as specified and directed. (Before quoted rate for the said item, please visit at Sagat Singh Auditorium).
Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
M/s Manav Builders
RAMA AUTOS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .