Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC | L1 | Accepted-AOC Due to lowest accepted | |
| 2 | L2₹16.7 L+₹24,321.38 (1.48%)Rejected-Finance VPO BURJ HARI SINGH TEH RAIKOT DISTT LUDHIANA PIN 141109 PB | RAIKOT | LUDHIANA | PUNJAB | 141109 | L2 | Rejected-Finance Other than lowest | |
| 3 | Rejected-Technical | - | Rejected-Technical previous wokrs not yet completed. Show cause notice served |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana-141001
REPAIR TO JOINERY and CERTAIN B/R ITEMS AT BADDOWAL AND MOGA UNDER AGE B/R BADDOWAL GE LUDHIANA
2022_MES_552639_1
GE/LDH-41/2022-23
Open Tender
Civil Works
Item Rate
270 days
Baddowal and Moga under GE Ludhiana
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
Yes
GE Ludhiana
₹40,000
Yes
29 Nov 2022
17 Sept 2022
15 Oct 2022
17 Sept 2022
14 Oct 2022
1 Oct 2022
17 Sept 2022 - 30 Sept 2022
Amount
Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description exceeding 1 Sqm and n exc 2 sqm each complete all as specified and as directed by Engineer –In -Charge.
Taking down shutter of any description exceeding 2 Sqm each complete all as specified and as directed by Engineer –In -Charge.
S&F for Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc., complete all as specified and directed by Engineer-in-Charge.
S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete 1:3:6 type C-o (using 12.5 mm thick stone aggregate) as filled in door frame chamfered angles, Hold Fast and throating, complete all as specified and directed.
S&F of factory made plain framed pannelled door shutters 35mm thick (two layer panel) with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated all as specified and as directed.
M&L for 35mm thick factory made glazed and skeleton shutters,2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Pre-laminated particle board 18/19mm thick, interior grade, pre laminated one side decorative choice lamination and side balancing white,fixed in frame, complete all as specified and as directed by Engineer –In -Charge.
Dismantling mild steel rolling shutters, doors gates and the like complete all as specified and as directed by Engineer-in-Charge.
S&F for ball bearing for rolling shutters complete all as specified and as directed by Engineer-in-Charge.
S&F for helical wire spring with new 8 gauge helical wire spring complete all as specified and directed.
S&F for steel rolling shutters of thickness of laths 1.00mm , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide channels, stopper, handles, lock plate,sliding lock-2No. on each rolling shutter, 2 No. of bracket plate on each rolling shutter,, u-clamp, pulley as per requirement and one shop coat of primer; erected in position as indicated, complete: push pull or manual type (as per drawing No.CEJZ/TD-1095/08 Sheet no. 1/2 & 2/2) complete all as specified and as directed by Engineer-in-Charge.
M&L for Box type steel window/ventilator made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately.
All as item No 15 above but fixing with wire mesh.
M&L for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.
S&F for mild steel Mortice lock vertical type 100mm size, 4 lever fixed in aluminium shutter complete all as specified and directed by Engineer-in-Charge.
M&L for hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete.
M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete fixed in repair all as specified and directed by Engineer-in-Charge.
S&F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.
S&F for floor door stopper of aluminium alloy body and tongue, 140mm size ,anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.
S&F in Aluminium handles, cast type, anodised 150mm long completed all as specified and directed.
S&F for 300 mm long ordinary rat tail rod paltren spring incl roller and roller plate complete (Mild steel)
S&F for 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed by Engineer-in-Charge.
S&F for 150mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified & directed by Engr-in-charge.
S&F in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surface of any description two coats of synthetic enamel paint over a coat of pink primer including prepration to new wooden surfaces exc.10cm in width or girth complete all as specified and directed by Engineer-in-Charge.
M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
S&F for continuous (piano) hinges having width of flap 40mm (when open), mild steel, bright finish or electrogalvanised complete all as specified and directed by Engineer-in-Charge.
Replacement of existing pulleys with new pulleys weight not less than 500 grams made of mild steel to the reqd shape and size incl necessary welding turning etc for smooth functioning to keep in position alignment complete.
Replacement of existing unserviceable helical wire spring with new 8 gauge helical wire spring complete all as specified and directed.
Cleaning, oiling and greasing the guide channels of gear operated or manual type steel rolling shutter alongwith bevel gear box and crank handle complete all as specified
Replacement of existing unserviceable side lock arrangement of steel rolling shutter with new locking arrangement as per existing design, size and shape incl necessary rebating etc complete all as specified.
Overhauling, servicing and realignment of rolling shutters of area not exc 12 sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed.
Overhauling, servicing and realignment of rolling shutters of area exc 12 sqm but not exceeding 25 sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed. Note : - (i) Necessary arrangement of crane/moving ladder shall be made by the contractor with out any extra cost
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer - in -Charge.
M&L for brick work with sub class "B" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer - in -Charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
Taking down cement plaster on brick wall etc incl racking out joints hacking for key scrubbing down with water etc. complete all as spd & directed.
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cm 1:6 finished even and smooth with out using extra cement complete all as specified & directed.
M/S Satguru enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .