Krishnagiri District Krishnagiri Block DRDA Assets 2023-24 Providing wall panneling and interior painting in collector Room in DRDA office Complex at krishnagiri in Krishnagiri District Pkg No 2023-24 KGI 43

Amount

Providing wall panneling and interior painting in collector Room in DRDA office Complex at krishnagiri in Krishnagiri District

Dismantling Brick work in Cement mortar etc., complete

Dismantling Door's & windows etc., complete

Brick work in following Cement Mortar using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Supplying and fixing Teakwood frame with scantling above 2m for doors including labour charges for wrought and putup in possible and for fixing holdfast in frame and necessary etc., complete.

Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing Wall Panelling using one side teak wood sheet following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both directions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevicol and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete.

Providing and fixing GYP BOARD FALSE CEILING and fixing with a new Gyp Board false ceiling using plain sheet 10mm thick which includes shaped GI channels of size 25 x 25 x 0.50 mm thick suspended from ceilling at 1.2 m both longitudinal and cross vertical support and fixing shaped GI channels of size 50 x 30 x 0.50 mm and 150 x 10 x 0.50 mm thick at 0.60m centre longitudinal and cross difrection for vertical supports and fixing U shaped GI channels of size 50 x 30 x 0.50 mm thick and 50 x 10 x 0.50 mm thick at 0.60 m centre to centre in cross direction and respectively forhorizantal supports of zig - zag pattern and fixing of Gyp board in the panel provided in the desing pattern given and sprating the standard spection and as directed by the departmental officers. The rate shall be inclusive of finishing the edges and wall junctions with suitable lipping and cornice arrangements.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing of Tamil brass letters of approved size and colour. The colour treatment process is achieved with MRF colour coat, and then the processed coloured layer is set into the killen for the heat treatment process for the following size etc., complete

Supplying and fixing of Emblem (15”) of approved quality as per standard specification.

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting old wood work with one finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Polishing with two coat of Melamine Polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.)

Supply, installation, testing and commissioning of 3 TR (9000kcal/hr) capacity 4 way cassette type air conditioner unit with ceiling mounted indoor unit with cooling coil section and blower motor with required valves and microprocessor control panel. outdoor unit shall consist of Hermetically sealed scroll/ rotary compressor with inbuilt protection, auto reset type HP/LP cut outs with highly efficient condenser assembly suitable for operation on three phase/ single phase, 50Hz supply as per the BEE specification. the units shall be capable of performing the following functions:a. Cooling b.Dehumidifying c.Air circulating d.Filtering The installation work for the indoor unit shall include fitting the unit on the false ceiling with anchor fasteners and threaded rods, etc and the outdoor unit on suitable mounting stand with anti vibration mounts. The units shall be charged with non-CFC refrigerant gas and leak tested and commissioned as per the design requirements.

Supply and fixing of 5/8 inch copper refrigerant Piping interconnecting indoor unit and Condensing unit with necessary fittings, supports, insulation, cover pipe etc., complete.

Supply and fixing of 3/8 inch copper refrigerant Piping interconnecting indoor unit and Condensing unit with necessary fittings, supports, insulation, cover pipe etc., complete.

Supply and run of 4 core armouned 2.5 sq.mm copper wire for interconnecting indoor and outdoor units

Supply and fixing of 2 Non CFC Refrigrent Gas

Supply, fabrication and fixing of suitable MS angle support frame for Outdoor units with concrete bed, anti vibrating pad etc., complete.

Supply and fixing in of water drain wine (PVC Pipe)

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Periyanayagi enterprises