1009/1/Accts/CTS/CHNC/20-21

QRT REST ROOM

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth etc., getting out in any type of soil

Soil/Moorum/excvated material obtained from excavation will be filling under in floor, including spreading, levelling, watering and well ramming in layers and removed balance surplus soil to 50m distance from MD land

M&L PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete

100mm thick Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface

M&L 100mm thick Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring etc, complete

M&L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in subbase to flooring complete

Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6 , complete

M&L Providing cement concrete 1:3:6 type C-1 ( Using 20 mm graded crushed stone aggregate ) as in coping, Gola etc including necessary formwork as required c

M&L for 10mm thick rendering on Internal fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of priming over 1mm thick of wall care putty complate

M&L for 15 mm thick rendering on External fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including scapfolding arrangement as per site requirement including Preparation of new plastered surfaces of wall and applying two coat of cement base paint over one coat of primer , complete

S & F of 60mm bore MS tubular pipe of 4mm thickness, roof trusses (framed), trussed, purlins, crane gantries, tubular pipes, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Chequered plates and plain plastes of any thickness and distance pieces, cleats etc conforming to Fe-410- W(Gde-E-250) quality- B inlcuding Preparation of steel surfaces of any description, two coat of synthetic enamel paint and over one coat of red oxide primer.

S&F Pre-painted coloured profiled Galvalume/ Zincalume sheet 0.50mm thick TCT of grading YS-550, coating class AZ-150, class-3 confirming to IS-15965-2012, pitch profile c/c n.exc 203mm & crest of profile not less than 28.5mm as in roof covering/cladding to wall fixed with self taping screws/fastners with EPDM seals including gap filling between sheet and wall with PCC (1:3:6) as per site requirement complete of Make - Durashined ® of Tata Blue Scope/ Colouron ‘+’ of JSW/ Kamdhenu etc

S&F false ceiling with Everest Fibre Cement Designer tile Ivory/white painted (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 595mmx595mm and any one of the design (occeanic , lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @120 gms, both sides inclusive) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0..30mm thick sheet and cross T of size 15x32mm made of 0.30mm sheet spaced between main T at 600mm c/c from a grid of 600x600mm and wall angle of size 15x20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers grils, light suspended from ceiling using GI soffit cleats fixed to existing rafters, purlin etc with dash fastners GI adjustable rods of 3mm dia wit galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centre black pre-painted with polyester painnt and having a load bearingcapacity of 12 kg/sqm

Vitrified tiles coloured of 600x600x10mm thick (square/rectangular) in floors and skirting etc, set and jointed in neat cement slurry and jointed with spacers and pointed in liquid epoxy tile grout to match over and including 10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, complete

Plinth Protection along the outer wall for 50 mm thick and 750mm wide cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection

M&L RCC Lintel Bend of size (0.23M wide x 0.15M height) of 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) (Nominal Mix) as in Lintel Bend of on wall,or similar works, including necessary formwork complete

M&L RCC Plinth Beam of size (0.23M wide x 0.45M height) of 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) (Nominal Mix) as in Plinth Beam or similar works, including necessary formwork complete

S&F TMT steel bars 12 mm dia as in refinforcement, cut to length, bend to shape required including craniing, bending spirally or hooping for coloumns, hooking ends and binding with MS wire (annealed not less than 0.9mm)

S&F TMT steel bars 8 mm dia as in stirrups, cut to length, bend to shape required including craniing, bending spirally or hooping for coloumns, hooking ends and binding with MS wire (annealed not less than 0.9mm)

Factory made mild steel Box type window of (SIZE- 1.0M wide x 1.20M height) with double shutter both gauzed and glazed including mild steel grill made of 10mm thick square solid bar with upper top hung shutters including pintol hinges, steel peg stay including preparation of new steel surface and applying two coat of synthetic enamel paint over one shop coat of red oxide primer complete all specified. Note : SS wiremesh and 4mm thick glass will be fixed in quoted rate in both shutters. No extra payment will be paid for wiremesh and glass & MS grill.

S&F Complete wooden door with double shutter both panelled and wiremesh shutter (Size of door-1.0m wide x 2.10m height) with Iron pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregates filling inside hollow section etc and 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (three panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces including Preparation of new wooden surfaces and steel surface and applying two coat of synthetic enamel paint over one coat of primer includinh 02 Nos handles of 200mm long and 02 NOs Towerbolt and 01 Nos helical door spring in each shutter fixed with screw complete. Note; SS wiremesh will be fixed in quoted rate in wiremesh shutter.

S&F 15 Amp Socket with cable connection and switch board

S&F 5 Amp socket with cable connection and switch board

S&F light points with cable and switch board

Accessories for installation items quoted as per Ser No. 22, 23 & 24 for fully functional of 2 x ceiling fans, 02 x 5 Amp sockets and 15 Amp Sockets

M/S SOTRA ENTERPRISES

M/S R S CONSTRUCTION CO