Construction of Home office for Honorable Managing director, CESC at Mysuru

Construction of Home office for Honorable Managing director, CESC at Mysuru

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The g...

Beams and Lintels of Buildings

Roof (Straight & Arched)

Chejjas, Canopy & Other Architectural projections of minor sections

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (V-2, Pg no.9, Item No.5.4)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

Providing, making & fixing in position TEAK wood DOOR with frame wood of size of 6"x4" & panelled shutter of 35mm thick approved shape with SS fixtures including melamined polishing. Cost to include f...

Providing, making & fixing in position TEAK wood DOOR with frame wood of size of 5"x3" & panelled shutter of 35mm thickapproved shape with aluminium SS fixtures including melamined polishing. Cost to ...

Providing, making & fixing in position teak wood frame for DOORS of size of 5"x3" & Laminated shutter of approved shape with aluminium SS fixtures including one coat of primer & two coats of enamel pa...

Providing and fixing of openable door made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free...

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

Providing and laying 12mm thick Anti-Skid / RUSTIC Tiles for FLOORING with cement coating on back side and curing strictly for a minium period of 2 days for BALCONIES laid on 12mm (average) thick ceme...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing and applying white cement based putty of average thick ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per s...

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of ap proved brand and manufacture, including applying additional coats wherever re...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

Painting with synthetic enamel paint of approved brand and manu facture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appr...

Providing and laying in position yelahanka tiles of size 250 x 250mm of approved quality and make, over a bed of cement mortar 1:3 an average thickness 25mm over weather proof course and pointed with ...

Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a prim ing coat of approved steel primer using structural steel e...

Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 r...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

KSRB 15.8.2 Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls ch...

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for not and cold water supply including all CPVC plain and brass threaded fittings inc...

25 mm dia (SR 18-19, Pg No.98, Item No.13.85.3)

32 mm dia (SR 18-19, Pg No.98, Item No.13.85.4)

Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, includin...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore. (V-2, Pg. No-117, Item No.13.4.1)

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...

Providing & fixing Table Top Basin, Size: 470x470x110 mm of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the E...

Providing & fixing Rimless Back to Wall WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set, Size: 360x575x410 mm, P Trap-180 mm of Jaquar or equivalent make includin...

Providing & fixing Single Lever Sink Mixer with Swinging Spout (Table Mounted) with 450mm Long Braided Hoses of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading...

Providing & fixing Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) o...

Providing & fixing Hand Shower 105mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System of Jaquar or equivalent make including cost of labour, tran...

Providing & fixing Overhead Shower 200X200mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System of Jaquar or equivalent make including cost of labour, tr...

Providing & fixing Metropole Flush Valve Dual Flow 32mm Size (Concealed Body) with Concealed Shut Off Provision & Rectangular Dual Flush Plate, ABS Chrome Plated (3.0/6.0 Lts. Per Flushing) of Jaquar ...

Providing & fixing Single Towel Rail 600mm Long of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer i...

Providing & fixing Soap Dispenser with Glass Bottle of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engine...

Providing & fixing Towel Ring Round with Round Flange of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engi...

Providing & fixing Toilet Roll Holder with Stainless Steel Flap of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions o...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Providing and fixing to wall, ceiling and floor, high density polyethylene pipes 6.00 kgf/sq.cm working pressure 140mm outside diameter with special flange, compression type fittings, wall clips, maki...

Providing and fixing on wall surface. 4.0 kg / sq.cm H.D.P.E. rain down water pipes 110mm outer dia. approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamp...

Providing and fixing 75mm to 150mm dia NP grating (SR 18-19, Pg No.90, Item No.12.111)

Elecrtical Works: Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concr...

25mm dia 2 mm thick (V-6,Pg No.2, Item No.1.2.2)

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto 50mm wall surface complete. (V-6.Pg No.3, Item No.1.7.1)

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using copper PVC insulated multistrand 2X1.5 Sqmm copper wire with a 6 Amps flush type SP control switch shall be fixed...

b) Medium point above 3 Mtrs Upto 6 Mtrs from tapping point to outlet via switch (V-6,Pg No.5, Item No.2.1.2)

c) Long point above 6 Mtrs Upto 10 Mtrs from tapping point to outlet via switch (V-6,Pg No.5, Item No.2.1.3)

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting

in Brick/Stone/C.C wall ...

4-5Way (V-6,Pg No.8, Item No.3.4.3)

6Way (V-6,Pg No.8, Item No.3.4.4)

8Way (V-6,Pg No.8, Item No. 3.4.5)

10-12Way (V-6,Pg No.8, Item No. 3.4.6)

16 Way (V-6,Pg No.8, Item No. 3.4.7)

Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box (V-6,Pg No.2, Item No.1.5.1)

25mm deep junction box (V-6,Pg No.3, Item No.1.5.2)

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

4 Module (V-6,Pg No.8, Item No.3.5.3)

6 Module (V-6,Pg No.8, Item No.3.5.4)

8 Module (V-6,Pg No.8,Item No.3.5.5)

10 -12 Module (V-6,Pg No.8,Item No.3.5.6)

18 Module (V-6,Pg No.8,Item No.3.5.8)

Wiring for lighting/power circuit using one of PVC insulated 1100V grade,multistrand Copper conductor single core cable in open or concealed system of wiring (a) 1.5 Sqmm (V-6,Pg No.5, Item No.2.3.2)

b) 2.5 Sqmm (V-6,Pg No.5, Item No.2.3.3)

c) 4.0 Sqmm (V-6,Pg No.5, Item No.2.3.4)

Supplying and fixing of modular switch/socket/stepped electronic regulator/dimmer/telephone socket etc on existing modular switch plate.(P-8;I-18) (a) 6 Amps 3 way socket (V-6,Pg No.9, Item No.3.6.3)

Stepped fan regulator TWO Module (V-6,Pg No.9, Item No.3.6.4)

32 Amps DP switch (V-6,Pg No.9, Item No.3.6.9)

6/16A Universal Socket (V-6,Pg No.9, Item No.3.6.10)

TV/Telephone Socket (V-6,Pg No.9, Item No.3.6.11)

6Amps 2 Way (V-6,Pg No.9, Item No.3.6.2)

6Amps one way Switch (V-6,Pg No.9, Item No.3.6.1)

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board. (16-25 A 2 pole) (V-6,Pg No.18, Item No.5.20.1)

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should ...

GI/Copper strips for grounding connections, using necessary fixing materials as required. 50 x 6 mm Copper strip (V-6, P-105, I-12.58.10)

GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 x 600 x 3 mm Copper plate (V-6, P-105, I-12.58.11)

Supply and fixing of Panel Board for fixing of indipendent meters for residencial purpose including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of t...

Providing and fixing 1 HP water pump including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work. (MR)

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI...

Supplying of 1x4' feet - PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V...