REPAIR/MAINT OF INTERNAL ELECTRIFICATION INFRASTRUCTURE INCLUDING REWIRING IN N1 / KULDEEP / JK / NAIR AND NARENDRA GROUND AREA AT AFS KANPUR

Amount

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M & L for concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in with and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19/20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.5 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:4) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge suitable for the following :- For one light, fan, call bell.

All as per item No 2 here-in-before but For one socket point controlled by one switch on independent board.

all as per item No 2 here-in-before but For one socket point controlled by one switch on same board.

All as per item No 2 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M & L for surface point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including casing caping 20 / 25 mm white / ivory with all accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC / Polycarbonate gang box of appropriate size for fixing of switches / sockets, fan regulators, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing all as specified and directed by Engineer-in-Charge suitable for the following :- For one light, fan, call bell.

all as per item No 6 here-in-before but for one socket point controlled by one switch on independent board.

all as per item No 6 here-in-before but for one socket point controlled by one switch on same board.

All as per item No 6 here-in-before but in casing /caping for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S & F, in replacement, for switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

S & F, in replacement, for switch flush type single pole two way 5 Amps, 240 volts, white finish complete all as specified.

S & F, in replacement, for switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified.

S & F, in replacement, for socket outlet 5 pin, 5 Amps flush type white finish complete all as specified.

S&F, in replacement, for socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.

S&F, in replacement, electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified.

S&F, in replacement, ceiling rose, surface backlite, 65 x 20 mm three terminal, ISI Marked .

S&F in replacement of bell ding dong 230 volt AC.

M&L in replacement of bell push flush type 5 Amps white finish complete all as specified .

S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 Volt with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

all as per item No 19 here-in-before but 4 ways -do-.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used TPN, 4 ways, 415Volts (horizontal type) with 200 Amps rated bus bar suitable for TPN MCB / 4 pole Isolator fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as directed.

Supply & fixing, testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs fixed in repairs complete all as specified & directed. Make : Legrand /Schiender/ABB/Indo Asian

All as per item No 22 but of SP 40-63 Amps.

All as per item No 22 but of SPN 32 Amps. Make : Legrand Cat No 408617 or equivalent in Schiender/ABB/ Indo Asian

All as per item No 22 but of SPN 40 / 63 Amps. Make : Legrand Cat No 408618 / 408620 or equivalent in Schiender/ABB / Indo Asian

All as per item No 22 but of TP 40 / 63 Amps. Make : Legrand Cat No 408659 / 408661 or equivalent in Schiender/ABB/ Indo Asian

All as per item No 22 but of TPN 40 / 63 Amps. Make : Legrand Cat No 408792 / 408794 or equivalent in Schiender/ABB / Indo Asian

S&F sheet metal enclosure , 20A single pole and neutral with a two pin and earth plug and socket complete in metal clad board with one single pole MCB 20 Amp fixed properly on in concealed position all as directed by Engineer-in-Charge. Make : Legrand/Schiender/ABB/ Indo Asian

S&F in replacement metal clad socket industrial 2pin & earth plug top 20A, 230V complete suitable for AC Box. Make : Legrand/Schiender/ABB

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn in new/existing MS/PVC conduit with 1.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length complete all as specified and directed by Engineer in Charge.. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 1.5 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down UNSV old wiring complete all as specified and directed by Engineer in Charge.. Note : (i) Two single core cable, one run of earth copper conductor and one run of PVC casing capping will be measured and paid as one unit length.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in new/existing MS/PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete complete all as specified and directed by Engineer in Charge.. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 2.5 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down UNSV old wiring complete all as specified and directed by Engineer in Charge. Note : (i) Two single core cable, one run of earth copper conductor and one run of PVC casing capping will be measured and paid as one unit length.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in new/existing MS/PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete complete all as specified and directed by Engineer in Charge. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down UNSV old wiring complete all as specified and directed by Engineer in Charge. Note : (i) Two single core cable, one run of earth copper conductor and one run of PVC casing capping will be measured and paid as one unit length.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in existing MS/PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete all as specified and directed by Engineer in Charge. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn through in and incl suitable size PVC casing capping and all accessories fixed on wall/floors surface along with 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down UNSV old wiring complete all as specified and directed by Engineer in Charge. Note : (i) Two single core cable, one run of earth copper conductor and one run of PVC casing capping will be measured and paid as one unit length.

S&F rigid non metallic medium white / ivory PVC conduit medium grade ISI marked of size not less than 20 mm dia concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed position incl cutting chasing & making good to disturbed surfaces & matching with the existing colour of wall/floor etc all as directed by Engineer-in-Charge.

all as per item No 38 here-in-before but 25 mm dia PVC conduit medium grade ISI marked -do-.

M&L in repair for service cable of PVC insulated unsheathed weather proof twin core aluminium solid conductor 6 sqmm complete all as specified and directed.

All as per item ser No 40 above but cable size 10 sqmm.

S & F LED 8 Watt bulb complete all as specified and directed.

S & F LED 14/15 Watt bulb complete all as specified and directed.

S & F LED 14/15 Watt LED invertor bulb with inbuilt battry and backup of approx 4 hours, complete all as specified and directed.

M & L in replacement for energy saver LED light fitting 40 watt, 230 Volts, single tube mounting including LED Tube/ LED blocks 40 Watt ,Lumen OUTPUT NOT LESS THEN 100 LM /WATT with 50000 burning Hours, PF = 0.95 complete with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection three core copper cable from ceiling rose to led light fitting all as directed including removing of UNSV tube light fitting. Make: PHILIPS BN100C LED 40S-6500 PSU L120GR or equivalent in Wipro Cat Part No LL24-541-xxx-57-xx /Havells cat No LUMILINEPLUS XS40W LED865SPCWH

M & L energy saving LED 4ft Batten 20 Watt with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 110 lm/W with fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV . The luminaire shall have a rate system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP 20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded aluminium batten with a PC glossy diffuser. Philips Cat No : BN 021 LED 20S 6500 PSU GR S1 or equivalent in Wipro Cat Part No LL20-221-XXX-65NE3 / Havells Cat No : LUMILINE PLUSBS 20WLED865SPCSSIND

M & L energy saver LED Smart Batten fitting 10 watt, 230 Volts, Box type. etc and accessories, including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV bracket with sketch fitting all all as directed. Make : Philips Cat No BN 021 LED10S - 6500 PSU GR S1 or equivalent in Wipro Cat Part No LL20-111-XXX-65NE3 or Havells

M & L in replacement complete for recess mounting LED Panel 600 x 600 mm fittings made of CRCA powder coated finish LED used shall be SMD type and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintenance CCT UP TO 6500,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge complete all as specified and directed by Engineer in Charge .

M & L in replacement complete for recess mounting 1' x 4' LED Luminaire with high transmitive diffuser suitable for indoor spaces fittings made of CRCA powder coated finish LED and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintenance CCT UP TO 6500,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge protection 2.5 KV AS IS 10322 and IEC 60598 system wattage 31 - 36 watt complete electronic drivers with all internal electric connections complete all as specified. Make :Philips Cat No. RC 380 B LED 36S -6500 G5 L3 W12 PSU OD or equivalent in Wipro / Havells

S&F Endural LED bulk head fitting Plastic Body, heat resistant, with specially designed gasket all as per directed by Engr- in - charge. Make : Philips Cat pat- WT140W LED7S NW PSU S1 PC or equivalent in Wipro / Havells.

S & F bldg security light fitting 36 watt LED with pressure die cast housing IP 65 suitable for scondary road/bldgs power consumtion should not be more than 35 watt and power factor should not be less than .90 complete all as per specified and directed. Make : Philips Cat Part No : BRP046 LED 36 CW MR S1 PSU GR or equivalent in Wipro / Havells.

S&F bldg security light fitting 20 watt LED with pressure die cast housing IP 65 suitable for secondary road/bldgs power consumtion should not be more than 18 watt and power factor should not be less than .90 complete all as per specified and directed . Make : Philips Cat Part No : BRPO42 LED 19 CW MR S1 PSU GR or equivalent in Wipro / Havells..

M & L in repaire for LED Building Security Light 70 watt of alumenium PDC housing glass coverwith IP 66 protection complete all as specified and directed. Make: Havells 70W Endura Pearl Plus Outdoor / or equivalent in Philips/ Wipro

S&F in replacement LED Flood light fitting 120 watt, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP-65 flood light with high power LEDs as light source, suitable for highlighting architectural tacade highmast and general purpose lighting with all internal electric connections complete all as specified and directed. Make: Havells Cat No: JETAIRISFLS120WLED757SYMLTG / Philips / Wipro.

Supply and fixing new generation , post top , energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution , spun aluminium landscape IP 65 luminaire with high power LED as light source of capacity 35 watt including necessary electrical connection all as directed. Make Havells cat Part No RUBYPT35WLED757PSYMTOPC or equivalent in philips/Havells.

Supply and fixing new generation , post top , energy saving environmental friendly, long life aesthetically designed with good indirect symmetrical light distribution , die cast aluminium landscape IP 65 luminaire with high power COB LED as light source of capacity 35 watt including necessary electrical connection all as directed. Make Havells cat Part No ENDURASPRING6PT35WLED757PSYMTOTG or equivalent in philips/Havells.

Supply & fixing decorative LED luminary suitable for wall mounting 15 / 8 watt retrofit with LED Bulb 8 watt, lamp holder complete made up of polycarbonate including fixing arrangements and taking down old rusted bracket fittings complete all as specified and directed. Make : Philips, Cat Part No : COMET 30575 or equivalent in Wipro / Havells.

Supply and fix energy saving LED 4ft Batten 20 Watt twin glow, LED up and down glow batten (Yellow uplight relax mode and white downlight work mode) aesthetic design, with polycarbonate housing, CCT 6500 K, 240V 50 Hz IP 20 ans PF 0.90 complete all as specified and directed. Make Philips Cat No. LB0620 12NC or equivalent in Havells/ Wipro

S&F in replacement of switch Piano modular type, 6 Amp, one way complete all as specified.

S&F in replacement of switch Piano modular type, 16 Amp, one way complete all as specified.

S&F in replacement of mega bell push Piano modular type, 6 Amp with indicator complete all as specified.

S&F in replacement of socket outlet modular type, 3 pin, 6 Amp, shuttered complete all as specified.

S&F in replacement of socket outlet modular type, 3 pin, 6/16 Amp, shuttered complete all as specified.

S&F modular angle lamp holder 240 Volt, 6A, complete all as specified and directed.

S&F metal plug top suitable for 15 Amp Metal cald socket complete all as specified and directed

Supply and fix in replacement of bollard including light lamp having IP65/IK10 with base plate and making all necessary connection including fixing it in the ground with suitable clamping all as required and directed at site. Make: Philips cat Part BCP150 LED150/NW PSU 220-240V 7043 or equivalent in wipro/Havells.

Supply and fix in replacement of slim profile surface mounted downlight 2000 lumen in round safe , 4000K including all fixing arrangement . Make Philips cat Part No SM251C LED20S-6500 PSU WH or equivalent in wipro/Havells.

M&L for bracket made out of GI pipe 25mm dia medium grade, 0.90 mtr long bent to shape with welded MS flat 25 x 4 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 4mm thick FI nuts, bolts complete all as directed by Engr-in-charge incl taking down old unsv bracket of any size all as directed by Engineer in Charge.

Supply ,laying and testing cable XLPE Insulated,screened,PVC bedded,galvanized steel strip power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core all as directed by Engineer in Charge.

Supply ,laying and testing cable XLPE Insulated,screened,PVC bedded,galvanized steel strip power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core all as directed by Engineer in Charge.

Material and Labour for 3 core PVC insulated sheathed PVC stranded copper conductor cable of size 2.5 sqmm 1100 volt grade and PVC insulated 3 way all as directed by Engineer in Charge.

M&L for sheet metal enclosures for independent mounting for MCBs four pole fixing with suitable nut & bolt with washers on wall / panels and suitable connection arrangements for XLPE under ground cables with MCBs including removing UNSV switch fuse unit complete all as specified and directed by Engr-in-Charge. Make : Legrand Cat Part No 507793 or or equivalent in Schiender/ABB Note : MCBs shall be measured and paid separately.

S&F sheet metal enclosure TPN MCCB DB 8 Way , 415 volt (vertical type) with 250 A bus bar double door type IP 43 -IK 09 for DB when MCBs and MCCB upto 160Amp (as incomer) to be used fixed properly on/inconcealed position and to provide required sizes of flexible conduit at any open surface near DBs for cables/wires complete all as specified and directed. Make Legrand Cat Part No 507747 or equivalent in Schiender/ABB

S&F sheet metal enclosure TPN MCCB DB 4 Way , 415 volt (vertical type) with bus bar double door type IP 43 -IK 09 for DB when MCBs and MCCB 160 Amp (as incomer) to be used fixed properly on/inconcealed position and to provide required sizes of flexible conduit at any open surface near DBs for cables/wires complete all as specified and directed. Make Legrand Cat Part No 507745 or equivalent in ABB/Schinder

Supply and fixing MCCB 125Amps, 4 Pole, 415V, 25 kA , Ics =100 % Icu -do-. Make : Legrand Cat No 625349 or equivalent in Schiender/ABB

Supply and fixing MCCB 63Amps, 4 Pole, 415V, 25 kA , Ics =100 % Icu -do-. Make : Legrand Cat No 625349 or equivalent in Schiender/ABB

M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia med grade, lugs, main Earthing lead upto 7.5 mtr including Charcoal dust, Salt etc all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification all as directed by Engineer in Charge.

Supply and fixing Electronic Meter 10-60 amps Single phase tamper proof with Class 1 accuracy ,LED Indication for earth leakage, Elegant Polycarbonate Enclosure, High Surge withstand up to 8 kv, anti tamper features, Electromagnetic compatible & 6 digit Display. Make : L&T Model No.EM 101 Cat No.WW101BC7DDH/eqivalentin HPL/Secure

Supply and fixing LED Driver suitable for Garden light/Gate light as per site requirement complete all as specified and as directed. Note : Make of driver is as per make of fitting available at site

M/s A S Electrical

Preetpowercontrol

A.B.Enterprises

santosh electronics