Provision for Providing Perimeter Road Lighting ( Electrical Work) at Mahataja Agarsen Airport Hisar (Phase-II)

Amount

[23.22.3.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 3.2. Supply and erection of sheet steel enclosures 1pole/2 pole/4 pole on wall/on existing pedestal complete as required. S.P.N. or DP enclosure suitable for DP MCB

[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole

[23.22.5.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE

[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

[24.1.12]EARTHING AND LIGHTENING ARRESTOR 12. Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required.

[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required.

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.

[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

[24.2.4.2]LT CABLE 4.2. Laying of underground cable in pipe /existing open/closed trench etc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core

[24.2.4.3]LT CABLE 4.3. Laying of underground cable in pipe /existing open/closed trench etc as required:- 50 Sq mm to 150 sqmm 2 to 4 Core

[24.2.4.4]LT CABLE 4.4. Laying of underground cable in pipe /existing open/closed trench etc as required:- 185 sqmm to 240 sqmm 3 to 3½ Core

[24.2.7.3]LT CABLE 7.3. Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core

[24.2.7.5]LT CABLE 7.5. Supply and erection of suitable compression type brass cable glands for underground Cable :- 120 sqmm to 185 sqmm Cable 3 to 32 Core

[24.2.8.10]LT CABLE 8.10. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 120 sqmm

[24.2.8.12]LT CABLE 8.12. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 185 sqmm

[24.2.8.2]LT CABLE 8.2. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 4 sqmm to 6 sqmm

[24.2.8.5]LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm

[24.2.8.6]LT CABLE 8.6. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm

[24.2.8.7]LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm

[24.4.3]STREET LIGHT 3. Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections.

[24.4.8.3]STREET LIGHT 8.3. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 5 Metre Long pole with top dia 65 mm and bottom dia 130mm with base plate of size 250 x 250 x 16 mm

[24.5.1.1]MISCELLANEOUS ITEMS 1.1. Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 1.5 sqmm

[24.5.2.1]MISCELLANEOUS ITEMS 2.1. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 40/32 mm outer dia/ inner dia

[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia

[24.5.2.4]MISCELLANEOUS ITEMS 2.4. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia

Supply, installation, testing and commissioning of 30 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, galvanized inside and outside in single dip, suitable for wind velocity as per IS 2062 suitable for 9/12 no’s. luminarie loading fully motorized (power tool) with starter and cable complete along with standard accessories supplied by the manufacturer with 3 no’s steel wire rope double drum system and twin dome aviation light with LED including foundation with 1:2:4 Concrete, including cost of set of foundation nut and bolts as per drawing attached, installation at site complete all respect upto entire satisfaction of Engineer-in Charge. Height of mast 30 Meter, Sections Three, Material Constructions -HR sheet steel conform to IS 2062 / BS EN10025 or Equivalent. Base Dia and Top Diameter Top: 150 mm, Bottom : 540 mm Plate thickness-Top: 3 mm,Middle : 4 mm, Bottom: 4 mm. Cross Section of Mast- 20 side polygon .Standerd for Gananisation -As per BS EN ISO 1461, Size of opening and Door at Base-1200 x 250 mm, Diameter of base Plate-730 mm , Thickness of base Plate- 25 mm, Litghing Protection Finial- G.I single spike of length 1200 mm, Maximum wind speed- 47 m/s as per enquiry, Number of Foundation Bolts-12 nos. PCD of Foundation Bolts-650 mm, Type / Diamter/ lentgh of Foundation Bolts-TS 600 / 30 mm dia / 850 mm long ,Material of Construcion-50 NB ERW Class Medium - M. S. Pipe , Dia meter of Carriage ring-711 mm (ID),Construction-12 Arm, Welded, 2 sections, Load carrying Capacity-11 Luminaires asymmetrical, Conductor-Copper, 5 core, 2.5 sq mm, Insulation- EPR PCP Sheathed Cable , No. of Circuit- One nos. cables per mast, Type/SWL of winch-Double drum, SWL 750 Kg-DDMFO, Methed of Op. External Motor-External Motor, motor capacity-1.5 HP, 3 PH, 415V AC, No. of Speeds-6 Pole, Single speed, Torque Limiter-With mechanical tripping facility, Speed of Power Tool-1.8 mtr/ minute , Grade/ Construction-AISI 304, 7 /19 construction, No. of Ropes-Two continuous, Diameter-6 mm, Breaking Load Capacity-2350 kg x 2 ,The foundation size as per Drawing Attached and as per Soil bearing capacity Make -Bajaj/ Philips/ Surya

SITC of 2 Mtr Long 40 mm dia G.I. pipe with complete base plate for foundation and 1 No. earth stud and Junction Box for MCB and Loop in and loop out for three phase connector shall be inbuilt to the pole as required , the rates shall included the cost of 3x2.5 Sqmm copper conductor cable with Const. of R.C.C Foundation for 2.0 Mtr. Poles 1:1.5:3 for foundation, size 0.4M x 0.4M x 0.8M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with SF 20 mm dia 36` Long hot dip galvanized L type 4 Nos. Anchor bolts with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work..

Supply of LT Power Ard. Cables of Aluminium Conductor complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Grandlay/ RR Kabel/ KEI/ Polycab. 185 Sqmm 3.5 Core Ard. Cable

Supply of LT Power Ard. Cables of Aluminium Conductor complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Grandlay/ RR Kabel/ KEI/ Polycab. 120 Sqmm 3.5 Core Ard. Cable

Supply of LT Power Ard. Cables of Aluminium Conductor complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Grandlay/ RR Kabel/ KEI/ Polycab. 50 Sqmm 3.5 Core Ard. Cable

Supply of LT Power Ard. Cables of Aluminium Conductor complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Grandlay/ RR Kabel/ KEI/ Polycab. 35 Sqmm 3.5 Core Ard. Cable

Supply of LT Power Ard. Cables of Aluminium Conductor complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Grandlay/ RR Kabel/ KEI/ Polycab. 25 Sqmm 3.5 Core Ard. Cable

Supply and erection of PVC insulated (ISI Marked) copper conductor 4 Core cable 1100 V grade in pipe of suitable size excluding cost and erection of pipe but,including connections etc.with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. Make Polycab/ RR Kabel/ Grandlay 6 Sqmm

S/E of 45 W LED Street light fitting 120 Lumens per Watt Philips /Surya/ Wipro / Crompton make-in aluminum pressure dia casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including allpetty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Supply of 500 W LED floodlight Al Die Cast fixtures with Driver, suitable for operation on 230 V, 50Hz AC supply Amaze Plus, AMPL F 600L WH NB-A2 TG SD etc complete as required as per technical specification. With efficacy 120 lumen/W Confirming to IP66 Protection as required Make Philips / Surya /Crompton/ Wipro

SITC of 200 W LED floodlight fixtures including control gearbox , with driver suitable for operation on 120 Lumens/Watt etc complete as required as per technical specification suitable for Isolation Bay , Withefficacy 120 lumen/W Bajaj Praze Praze F 240L WH NB-A5 TG SD.Make Philips / Surya /Cromptonj/ Wipro

N D ELECTRICAL

Highlight Associates and Contractors

M/s Bhagwati Technologies

SANDEEP KUMAR CONTRACTOR

Mukesh Kumar Contractor