REPAIR/REPLACEMENT OF HT CABLE, OVER HEAD LINE AND CONNECTED ITEMS UNDER GE SAUGOR

Amount

Supply Laying & testing cable XLPE insulated screened pre bedded galvanized steel strip armoured electric power cable with stranded aluminium conductor 11 KV grade of size 3 Core 95 Sqmm. Make: Havells / Polycab / FINOLEX.

Excavation in trenches in any type of soil not exceeding1.5 meter wide and not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out.

Removing excavated materials (soil) not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 meter above starting point

Returning filling in with excavated soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Supplying and laying reinforced precast concrete cable cover, class HV, type 2, flat size 450mm x 180 mm x 40 mm

M&L for clean, dry sand filled in trenches / ducts for cushioning of cables complete all as specified. Note: The depth of cushion after punning shall only be measured.

S&F in repair pipe galvanised iron medium grade 80 mm dia ( ISI marked ) with all fittings laid in trenches or on pole, crossing of road, fixed on wall for protection of cables complete all as specified and directed

Supply, jointing and testing outdoor type cold shrinkable End termination cable joint including all material and accessories suitable for 3 core x 95 -120 Sqmm XLPE cable of 11000 Volts grade all as per manufacturer’s recommendations complete all as specified and directed. Make: Denson / M Seal / Seimens.

S&F in repair Cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed. Make: Denson / M Seal / Seimens.

Dismantling insulators any type any size.

Dismantling cross arms of MS angle section etc complete.

Dismantling stay assy complete.

Dismantling of ACSR conductors.

Dismantling earth wire.

Dismantling steel pole/ concrete /struts any size .

S&F in ground PCC cable route indicator duly engraved with words "HT Cable" and arrow indicating direction of laying of cable, complete all as specified and directed. Note: PCC cable route indicator shall be provided at specified distance along the HT cable at all cable joint and turning etc.

Earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick, burried directly in ground, earth pit not less than 2.25 meter deep below ground level with top edge of earth plate not less than 1.5 meter below ground level, steel earth plate connected with 32 x 6 mm GI strip by means of bolts, nuts, check nuts and washer of galvanised iron or steel as shown in electrical plate No. 5 connected to earth test point all as described in MES schedule part II including excavation earth work concreate pit with 50 mm thick RCC cover in RCC (1:2:4) type B-I duly reinforced with MS bars 6 mm dia @ 150 C/C both ways and pit chamber in PCC (1:2:4) type B-I with 2 Nos suitable lifting handles of 12 mm MS bar and GI protection pipe of suitable size,and watering pipe 20 mm dia with water funnel test point and extra length up to 7.5 meter connected to Panel board all as specified

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

M/S Kumar Contractors

M/S SHIVA TRADERS

S Balwinder Singh