Supply , Installation and Commissioning of Furniture for Academic Complex and other allied buildings at IIM, Sambalpur, Odisha.

printers, regular items etc. The carcass is separated in two types of storage, upper all four (04) storage cabinet with 5 mm thick

toughened clear glass fitted in the shutter of 18 mm pre-laminated MDF battened frame having 2 shelf 18 mm pre-laminated MDF,

lower storage with 8 door or as per the requirements of equal width and shelf of 18mm thick pre-laminated MDF board up to 600mm

EXECUTIVE TABLE -I - 5) The upper and lower storage place is lockable whereas upper storage can be used as book case as well as show case. The Glass

BACK UNIT framed shutter is an integrated assembly of four separate panels with grooving for fixing of glass within. Standard locks to be used

for locking arrangements.

6) The stainless steel CP coated smooth finish handles are fixed on glass shutters as handle. Provision of separate lock for lower

storage shutters with tower bolt for two shutters locking together, CP handles are fitted on all Shutters. Provision of adjustable shelf

for better placement of files and records.

7) The hung door cabinet is up to 600mm height there after an open shelf of 450mm height and glass door cabinet of 1050 mm

8) The Storage cabinet should have top projected design as shown in the images for better aesthetic view of the back unit.

All the pre-lam board laminate thickness is 1mm. All exposed edges shall be sealed with 2mm thick PVC Edge band and all non-

exposed edges with PVC edge-band of 0.8mm thickness. PVC edge band shall be pasted on through feed edge-banding machine with

the help of hot melt glue

9) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer –

1) Overall size 2100mm Height X 450 Depth x 4800mm Width as per requirement of Room Size.

2) Providing, supplying/ fabricating and placing/ Installation in position Back unit with book case and storage area enable visibility of

reference books and Records, Complete Book case or standalone storage unit. Top: -18mm thick Pre-laminated MDF board.

4) Carcass: - Side Panel, Verticals, Bottom, Skirting Panel & Shelf are made up of 18mm thick Pre-laminated MDF board with proper

grooving done near to back side edge of side panel and Bottom for fitment of back panel made up of 9mm thick pre-laminated MDF

board for the upper storage back and 18mm thick PLMDF board from the Floor upto the upper storage bottom at back panel for

support & stability of the upper storage . The open storage having the height of 450mm opening for keeping the open books, bottle,

printers, regular items etc. The carcass is separated in two types of storage, upper all Eight (08) storage cabinet with 5 mm thick

toughened clear glass fitted in the shutter of 18 mm pre-laminated MDF battened frame having 2 shelf 18 mm pre-laminated MDF.

Out of 8 upper Storage - The 4 Outside storages should have Glass shutter and Inside 4 Storage cabinets are of open shelf type to

be used as show case type (As shown in the image for reference). The lower storage with 16 door or as per the requirements of

equal width and shelf of 18mm thick pre-laminated MDF board up to 600mm height.

EXECUTIVE TABLE

5) The upper and lower storage place is lockable whereas upper storage can be used as book case as well as show case. The Glass

4 (BACK UNIT) Each 1 40000 40000

framed shutter is an integrated assembly of four separate panels with grooving for fixing of glass within. Standard locks to be used

for locking arrangements.

6) The stainless steel CP coated smooth finish handles are fixed on glass shutters as handle. Provision of separate lock for lower

storage shutters with tower bolt for two shutters locking together, CP handles are fitted on all Shutters. Provision of adjustable shelf

for better placement of files and records.

7) The hung door cabinet is up to 600mm height there after an open shelf of 450mm height and glass door cabinet of 1050 mm

8) The Storage cabinet should have top projected design as shown in the images for better aesthetic view of the back unit.

9) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer –

All the pre-lam board laminate thickness is 1mm. All exposed edges shall be sealed with 2mm thick PVC Edge band and all non-

exposed edges with PVC edge-band of 0.8mm thickness. PVC edge band shall be pasted on through feed edge-banding machine with

the help of hot melt glue

2 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Overall size 1200 X 600 X 750 mm

Table Top :- Providing, supplying/ fabricating and placing/ Installation in position 54mm thick Dark colored Table top made up of

18mm thick Pre-laminated MDF board with Two batten of same thickness fixed along two long edges from bottom side which provide

decorative twin colored thick edge look. The decorative trim to be connected in a way to form connectivity of 45 degree with Cable

end. Support Stiffener made up of M.S. rectangular pipe of 20X40X0.8mm thickness is provided for extra support for the Top of

length of 1200mm and above.

2) LEG :-18mm thick Leg or Cable End made up of 18mm thick Pre-laminated MDF board with two batten of same thickness fixed to

it from front side providing straight as well as a consolidated thicker look to table with two colored edge profile.

LECTURE HALL TABLE

3) Modesty :- Modesty Panel of lighter shade made up of 18mm thick Pre-laminated MDF board providing stability to structure and

5 allow sufficient leg privacy to user. The modesty height should be full height for privacy. Each 10 7000 70000

4) Grommet for Wire management and supply with installation of 2 Switch, 2 Sockets & LAN points under the table with provision of

horizontal/vertical raceway.

6) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of

Engineer - In - Charge.

All the pre-lam board laminate thickness is 1mm. All exposed edges shall be sealed with 2mm thick PVC Edge band and all non-

exposed edges with PVC edge-band of 0.8mm thickness. PVC edge band shall be pasted on through feed edge-banding machine with

the help of hot melt glue.

Overall size 1200 X 600 X 750 mm

Table Top :- Providing, supplying/ fabricating and placing/ Installation in position 54mm thick Dark colored Table top made up of

18mm thick Pre-laminated MDF board with Two batten of same thickness fixed along two long edges from bottom side which provide

decorative twin colored thick edge look. The decorative trim to be connected in a way to form connectivity of 45 degree with Gable

end. Support Stiffener made up of M.S. rectangular pipe of 20X40X0.8mm thickness is provided for extra support for the Top of

length of 1200mm and above.

2) LEG :-18mm thick Leg or Gable End made up of 18mm thick Pre-laminated MDF board with two batten of same thickness fixed to

LECTURE HALL TABLE it from front side providing straight as well as a consolidated thicker look to table with two colored edge profile.

- II 3) Modesty :- Modesty Panel of lighter shade made up of 18mm thick Pre-laminated MDF board providing stability to structure and

900mm X 465mm X allow sufficient leg privacy to user. The modesty height should be full height for privacy.

750 mm 4) Grommet for Wire management and supply with installation of 2 Switch, 2 Sockets & LAN points under the table with provision of

horizontal/vertical raceway.

6) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of

Engineer - In - Charge.

All the pre-lam board laminate thickness is 1mm. All exposed edges shall be sealed with 2mm thick PVC Edge band and all non-

exposed edges with PVC edge-band of 0.8mm thickness. PVC edge band shall be pasted on through feed edge-banding machine with

the help of hot melt glue

ALL LOUNGE SOFA &

1.Seater Dimension (L)960mm X (D)890mm X (H)870mm

2 seater Dimension (L)1410mm X (D)890mm X (H)870mm

3 seater Dimension (L) 2020mm x (D) 905mm x (H) 850mm

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves.

The Sofa of stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa. Each curve

ALL LOUNGE SOFA & defines a seating space which provides for people to be seated comfortably.

8 LOBBY Finished in a Brown Nappa Aire Leatherette , the sofa makes a fantastic first impression. The Cushioning is molded such that it flows Each 93 25,000.00 23,25,000.00

SOFA 2 SEATER along the partition for a clean unified look.

steam beech solid wood have used for framing construction of sofa.

The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic

webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyester

ALL LOUNGE SOFA & polyfill outer layer of 200 gsm. The polyester polyfill keeps the upholstery wrinkle free & soft.

9 LOBBY The unit should be complete as per image, and specification under the guidance of Engineer In-charge. Each 93 38,000.00 35,34,000.00

3 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

3 seater Dimension (L) 2180mm x (D) 850mm x (H) 800mm

Supplying, and placing in position of sofa as per Image. classic Contemporary design and slender curves.

The Sofa of stands Firm on solid SS/PVC legs with thick armrests that are slightly curved on the front face of the sofa. Each curve

defines a seating space which provides for people to be seated comfortably.

Finished with Fabric Material (Gray Colour or as per the approval of Sample), the sofa makes a fantastic first impression. The

Cushioning is molded such that it flows along the partition for a clean unified look.

LIBRARY READING Steam beech solid wood have used for framing construction of sofa.

10 The seat cushion is made of multi layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic Each 14 38,000.00 5,32,000.00

webbing. The thread used is nylon bonded to provide lasting stitch strength. The backrest has a foam of 28kg/m3 with polyster

polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinkel free & soft.

The unit should be complete as per image, and specification under the guidance of Engineer in charge with all complete as per the

WHICH INCLUDES:

ONE NO. 2 SEATER MIAN SOFA,

ONE NO. 2 SEATER SIDE SOFA,

TWO NOS. SINGEL SEATER SIDE SOFA,

VIP SOFA SET TWO NOS. STOOL SOFA,

WHICH INCLUDES ONE NO. COMBINED CENTER TABLE

ONE NO. 2 SEATER 1 seater Dimension (L)960mm X (D)890mm X (H)870mm

MIAN SOFA, 2 seater Dimension (L)1410mm X (D)890mm X (H)870mm

ONE NO. 2 SEATER 3 seater Dimension (L) 2020mm x (D) 905mm x (H) 850mm

SIDE SOFA, Supplying, and placing in position of sofa as per Image. The Sofa Set includes 2 Nos. of single seating sofa stool of size 460 mm x

TWO NOS. SINGEL 460 x mm 380 mm

SEATER SIDE SOFA, Finished in a Fabric (100% Polyester the sofa makes a fantastic first impression. The Cushioning is molded such that it flows along

TWO NOS. STOOL the partition for a clean unified look.

SOFA, Oak wood have used for framing construction of sofa. Secondary Material: Ply Wood (Water Proof), Leg Material: Oak-Wood, Foam

ONE NO. COMBINED Density: 40, Suspension System: Webbing Belt, Cushion Material: Poly Fiber, Seating Comfort - Mid Soft, Density Super Soft PU

CENTER TABLE foam: 40 Density Soft PU Foam, Dual Webbing belt: Webbing Belt.

The sofa Set should have sufficient number of Back Rest Sofa.

Shade – Cream Colour / Gray Colour / Shall be approved after approval of sample.

The unit should be complete as per image, and specification under the guidance of Engineer in charge.

Supplying and Placing in Position of Center Table size (L) 1,200mm X (D) 600mm X (H) 465mm. The Carlos collection stuns with its

CENTER TABLE TYPE I harmonious geometrical shapes and invite the eyes to explore the inherent beauty of solid wood. While the exotic Ash Burl veneer

12 (L) 1,200mm X (D) tabletop tells a story of refined craftsmanship with its stunning brick patterns. Designed to elevate your modern Indian homes. Each 105 15,000.00 15,75,000.00

600mm X (H) 465mm Checkered designer veneer tabletop makes it a timeless accent. Shelf storage offers generous space for books or magazines. Steam

Beech wood base makes it highly durable.

CENTER TABLE TYPE Supplying and Placing in Position of Center Table size (L) 1,200mm X (D) 600mm X (H) 465mm. The Carlos collection stuns with its

II harmonious geometrical shapes and invite the eyes to explore the inherent beauty of solid wood. While the exotic Ash Burl veneer

13 (L)750mm X tabletop tells a story of refined craftsmanship with its stunning brick patterns. Designed to elevate your modern Indian homes. Each 60 10,000.00 6,00,000.00

(D)465mm X Checkered designer veneer tabletop makes it a timeless accent. Shelf storage offers generous space for books or magazines. Steam

(H)465mm Beech wood base makes it highly durable.

CORNER TABLE TYPE Supplying and Placing in Position of Side Table size (L) 465mm X (D) 465mm X (H) 465mm. The Carlos collection stuns with its

I harmonious geometrical shapes and invite the eyes to explore the inherent beauty of solid wood. While the exotic Ash Burl veneer

14 (L) 465mm X (D) tabletop tells a story of refined craftsmanship with its stunning brick patterns. Designed to elevate your modern Indian homes. Each 132 8,000.00 10,56,000.00

465mm X (H) Checkered designer veneer tabletop makes it a timeless accent. Shelf storage offers generous space for books or magazines. Steam

465mm. Beech wood base makes it highly durable.

4 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Ceramic coating gives tremendous scratch-resistance and strength to the surface and makes the board a life-long asset for the

Can be mounted in landscape as well as portrait orientation on a wall with the help of built-in wall hanging clips

Ceramic Magnetic

Excellent erasibility with no ghost-marks, high scratch-resistance with easy-wipe properties and maximum readability with minimum

White Board with

15 glare makes the Prima series boards an ideal companion for all training, teaching, display and learning activities. E3 Ceramic Steel Each 70 4,000.00 2,80,000.00

provides a maintenance-free, corrosion-free and non-fading writing surface

Works well with all standard whiteboard marker pens (dry erase markers)

Package includes: 1 Ceramic Magnetic Whiteboard with built-in wall hanging clips, packaging for maximum protection. Installation

and maintenance instructions mentioned on the back side of the board.

Supplying and Placing in Position of modern design reception desk - milton/f material : engineered wood - particle board colour :

slate grey with frosty white / finish : laminated. Main table size : 3000 mm(l)x 900 mm(d)x 750 - 1050 mm(h) at 1st Level of Top

is 750mm Height Made of 25 mm thick MDF and 2nd Level at 1050mm height and the width of the top should be 400mm on all

sides. and cladded with 12mm mm thick Corian made up of Toughened Glass with Logo Embedded on it. Front Facia also having

Corian panel of Glass. Complete with Storages. All Material should be PLMDF confirming to the IS:12406:2003&IS:14587:1998.

Providing and supplying modern design reception desk in engineered wood make the products utile and a delight. timeless design

that elevates your office space structure of spacious reception desk, tabletop offers you a generous look for work surface use

premium quality materials over all size is 3000 mm(l)x 900 mm(d)x 750 mm(h) which give more surface area for work ,table top

made of 25mm thick also table top based on side panel's made 18mm thick prelaminated particle board of grade ii type iii of is

RECEPTION AREA 12823/latest. Combination construction of reception desk above table top 18 mm thick counter top to table top height is @ 300mm

TABLE ,overall reception desk height is @ 1050mm with counter top, table top made 25 mm thick prelam particle board work surface with

the exposed edges shall be finished with 2mm thick pvc edge binding tape of matching colour and shade fixed with hot melt glue.

along with 18mm thk additional modesty panel size is 1800 mm (l) x 700 mm (h) made by exclusive frosty white colour with epic

design & look.1 mobile pedestal (2 drawers + 1 filing cabinet )size is 450 mm(l)x 450 mm(d)x 725 mm(h) in provided with central

lock's for security and handle's are provided for easy of opening & pedestal's move on nylon castors.

All the pre-lam board laminate thickness is 1mm. All exposed edges shall be sealed with 2mm thick PVC Edge band and all non-

exposed edges with PVC edge-band of 0.8mm thickness. PVC edge band shall be pasted on through feed edge-banding machine with

the help of hot melt glue

The Chair should be made up 18mm Thcik Pre-Lam MDF Board.

Bottom Pedestal for better stability to the podium as well as aesthetic look. Should have 02 (Two) nos of Shelves with Groomet on

each for wire managements. Groomet should be provided on the podium top and bottom as well as on both side (bottom) of the

podium (as per the requirements) of the Institute. The speaker side bottom edge should have bidding at lower side for holding the

All the podium MDF board should be 18mm Thick Pre-Lam MDF board. All the MDF Board should have interlocking mechanism for

better stability and durability. The podium bottom should have heavy duty nylon shoes.

On the outer front side at middle IIM Logo Should be installed on Fibre Glass with embedded of IIM Logo on it and should be fixed by

17 WOODEN PODIUM Each 6 15000 90000

using heavy duty Stud. IIM Sambalpur full name should be on top front side of the podium. All the cost should be inclusive in the

All the pre-lam board laminate thickness is 1mm. All exposed edges shall be sealed with 2mm thick PVC Edge band and all non-

exposed edges with PVC edge-band of 0.8mm thickness. PVC edge band shall be pasted on through feed edge-banding machine with

the help of hot melt glue.

Inside the Podium there should be provision of 2 Nos. of each Switch & Socket for the power supply management under the shelf.

The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer - In

5 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

18 MEETING ROOM 1)Overall Size :-

TABLE 2400mm (L) x 1000mm (W) x 750mm (H) – 5 Nos

3000mm (L) x 900mm (W) x 750mm (H) – 7 Nos.

DISCUSSION/ 3000mm (L) x 1100mm (W) x 750mm (H) – 2 Nos (Admin)

MEETING ROOM 4000mm (L) x 1200mm (W) x 750mm (H) – 4 Nos (Admin)

Reference Image as in

1000mm (W) x 2)Providing, supplying/ fabricating and placing/ Installation in position Meeting table.

750mm (H) 3) Structure :- 25 mm Thick Oval shape top with Provision of Power Dock mounting facility, mounted on Box type gable end of 150

DISCUSSION/ mm thickness and Full height apron providing space for wire management within.

MEETING ROOM 4) Main top will have provision for Power Dock fixing. 54mm thick table top made in sandwiched hollow pattern. The 40mm thick

TABLE 3000mm (L) x batten structure to be sandwiched between top and bottom of 18mm thickness. Reference Image as in

900mm (W) x 750mm 5) The top and bottom layer to be pre-lam MDF finished. The overall look of the table top should be of uniform 76mm thickness and Sl 18

(H) uniform surface finish in terms of colour and no joining gaps. In case of final size being more than 2400mm the table top to be

splitted in equal parts mainteing symmetry and aesthetics of the furniture.

6) Leg /Gable ends:-900mm width and 200mm thick box pattern hollow leg made up of 18mm thick Pre-lam MDF with C shape

`part made cover panel made up of 18mm thick Pre-laminated MDF. Leveler adjustments to be provided .

21 7) Modesty :- made up of Pre-laminated 18mm MDF. Provision of wooden stiffeners of 100mm width and 18mm thickness made up Reference Image as in Each 2 40,000.00 80,000.00

of PPB fixed below table top inline with Modesty panel.

8) Wire Management:- Provision of support panel, Vertical/Horizontal raceway below/top for easy wire management across the

Conference table length. Provision for wire passing throughout the structure without mixing data and power connections. the wires

DISCUSSION/ can be pulled inside the table from floor and placed in the boxes built below open-able shutter on modesty.

MEETING ROOM 9) The access point for data and power can be mounted on Main top. Appropriate numbers power dock of modular switches and

TABLE sockets, Access flap are box structure made up of aluminum extrusion where user can fix switches of his requirement cable tray

Reference Image as in

22 4000mm (L) x made up of CRCA to be provided in proportion to width of the table. Ex 2 Qty each for 2400 width or as per the requirement of Each 4 45,000.00 1,80,000.00

1200mm (W) x seating capacity. Supply & installation of Switch & Sockets with LAN Points each seating.

750mm (H) 10) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer

DISCUSSION/ 11) The table shape outer radius can be decreased and increased as per the requirement of the Institute or shall be approved during

MEETING ROOM finalization of sample furniture.

1) Providing, fixing in position Computer Center / Reading Table of size 900mm (L)X 600mm (W) x 750mm (H)made with panel

based 60mm thick partition of 1200mm height. The panel based hollow partition of 60mm outer thickness with 36mm gap between

two panels to carry all kind of wiring within it at different level (skirting level / below table top level / Above table top level) from

2) The Frame is made up of specially designed and machined aluminum extrusions and connecting members such as multiple joint

handling brackets and Connector (Inline / Two way / Three way / Four way). The aluminum frame is cladded with 9mm thick panel’s

made up of Pre-laminated MDF for lower module from both the sides, fabric upholstered MDF panel’s for upper module from outer

COMPUTER side and fabric panel’s with marker + pinup from inner side at upper module as per requirement . Provision for Various Accessories

24 CENTER/READING mounting like Pen Holder, Paper tray, Telephone tray, File Holder & Name Plates can be mounted on partition after adding accessory Each 181 8,000.00 14,48,000.00

TABLE – WALL SIDE rail as per requirement. Raceway system-partition to have CRCA/ Aluminum removable/ hinge base vertical & horizontal raceway on

base skirting and below work top with Switch plate standard size with 2 modular switches and two sockets of approved makes as per

reference image. Grommet to be provided for wire management.

3) Computer Center / Reading Table Top made in 25mm thick pre-laminated MDF mounted on frames supported with top holding

bracket and cantiliver brackets cost of all connections required by top as to be considered. Table Top for Linear workstation of size

1200mm X 600mm.Edge The PLMDF board outer front edge should be post form type.

4) CPU Trolley: - Metal CPU trolley with wheels (with locking arrangements) suitable for CPU. 5) The work should be complete as per

Indicative image, approved samples/shop drawings, specifications and direction of Engineer - In - Charge.

6 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

1) The design should be similar with image shown and colour shall be finalized later or after approval of sample.

ROUND TABLE 2) 5 Seater Round meeting table size: 1350mm Diameter x 750mm H.

DISCUSSION TABLE 3) ± 5% Engineering Variation Top shall be 25 mm thick base material shall be 25 mm thick pre-laminated MDF board 2 mm thick

FOR CABIN AT PVC edge banding on the edges.

LIBRARY, MDP 4) The vertical cladding shall be 18 mm thick base material shall be 18 mm pre-laminated MDF board.

CLASSROOM & MDP 5) Legs and Top/Bottom plate shall be made from 1.6 mm Matt silver Anodized Aluminum extrusion.

25 6) Legs Assembled together with 8 mm thick MS powder coated sheet at bottom and 3 mm thick MS powder sheet coated at the top. Each 25 12,000.00 3,00,000.00

ROOM - 5 Seater The MS base shall be having provision for wire entry and glide fixing . Access Flap and Switch Mounting Tray made from matt silver

Round meeting table anodized aluminum extrusion and plastic molded components to facilitate access of electrical/data/voice sockets access from km top

size: 1350mm Meeting Table. Provision of 2 Switch & 2 Socket on both opposite side of the bottom support and as per the final approval by the

Diameter x 750mm H. engineer.

Individual Cluster size – 1350mm x 1350mm, Overall 4 Cluster – 2700mm x 2700mm

1) Providing, fixing in position office Staff Cubical of size 1350mm X 1350mm made with panel based 60mm thick partition of

1500mm height. The panel based hollow partition of 60mm outer thickness with 36mm gap between two panels to carry all kind of

wiring within it at different level (skirting level / below table top level / Above table top level) from flooring.

2) The Frame is made up of specially designed and machined aluminium extrusions and connecting members such as multiple joint

handling brackets and Connector (Inline / Two way / Three way / Four way). The aluminium frame is cladded with 9mm thick panel’s

made up of Pre-laminated MDF for lower module from both the sides, fabric upholstred MDF panel’s for upper module from outer

side and fabric panel’s with marker + pinup from inner side at upper module as per requirement . Provision for Various Accessories

mounting like Pen Holder, Paper tray, Telephone tray, File Holder & Name Plates can be mounted on partition after adding accessory

rail as per requirement. Raceway system-partition to have CRCA/ Aluminium removable/ hinge base raceway on base skirting and

below work top with Switch plate standard size with 2 modular switches and two sockets of approved makes as per reference image.

Grommet on table top for wire management.

3) Curvilinear Top made in 25mm thick pre-laminated MDF with all side edge-band with 2mm PVC edge-band mounted with PVC wire

manager cap on frames supported with top holding bracket and cantiliver bracket’s cost of all connections required by top as to be

considered. Table Top for Cubical workstation of size. 1350mm X 1350mmx 465mm depth (at Center the diagonal depth should be

INCUBATION CENTER minimum 750mm to 800mm Max.)

WORK STATION 4) Over Head Open Storage:- One Over Head Open Storage is required on Left side (Direction can changed as per the instruction of

Engineer In-Charge). Provision of One OHOS of size 750mm(W) X 250mm(D) X 300mm(H) made up of 18mm thick Pre-laminated

MDF board with bottom, Back& Side panel of 18mm thickness. (Sizes can be varies as per the suitability of the table or location).

5)Pedestal: - One Pedestal is required under the table. Pedestal of Size 400mm x 450mm x 675mm Carcass:- Top, Side Panel,

Bottom & Skirting Panel of Dark shade are made up of 18mm thick Pre-laminated MDF board with proper grooving done near to back

side edge for fitment of back panel made up of 9mm thick pre-laminated MDF board . The Side panel, Bottom and Top panel are to

be assembled with the help of wooden dowel, knock down fittings Drum with screw and corner fittings to ensure stability of box

structure formed.

6) Drawer & Shutterdetails: - Provision of two book Drawer of size 314mm(W) X 400mm(D) X 80mm(H) and one File Drawer of size

314mm(W) X 400mm(D) X 225mm(H) made up of 12mm thick Pre-laminated MDF board with bottom panel of 9mm thickness. The

small drawers are mounted on Telescopic slide with 3/4 extension. where Big Drawer mounted on Telescopic slide with full extension

allowing storage of files with the help of file manager. Drawer facia of Lighter shade made up of 18mm thick pre-laminated MDF

board. Provision of centralize locking for all three drawers and pull Handles for Drawer.

7) The Each Cluster should have separate legs and under structure and Partition Board with modesty. The Cluster should be of 4

Seating / 2 Seating and Single Seating type. So that each clusters should be installed in any location as per the requirements of the

1) Providing, supplying/ fabricating and placing/ Installation in position Overall Dimensions of All Steel Periodical Display Rack shall

be 900mm(W)x450mm(D)x1800mm(H). Rigid Knockdown construction ,Panels shall be made from CRCA 0.6 mm thick and front

frame shall be made from CRCA 0.8 mm thick . CRCA D grade as per IS 513 .

2) There shall be 5 level racks , Display tray shall be suitable for full scape size magazine ’ s ,periodicals, aesthetically appealing

metal tray at an angle for easy viewing . Receding facility to access the storage behind . Sliding on plastic rollers . Behind storage

MAGAZINE & NEWS shelving each of 5 level has a behind storage shelf .

PAPER STAND 3) Uniformly Distributed Load capacity per each shelf is 40 kg . Leveler shall be screw type with hex plastic base and finish shall be

epoxy polyester powder coated to the thickness of 50 microns.

4)Name Tag:- There should be name tagging holder made up of Fiber for tagging of name for each of the magazine storage unit.

5) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer -

7 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

1) Providing, fixing in position Six (06) seater Library Reading Table / Study Table of size 2100mm X 1200mm . All made of 25MM PL

MDF with 0.8 mm PVC edge banding on concealed edges and 2mm thickness PVC Banding on exposed edges. Table top should be

cantilever type support for convenient leg space for the reader on the table.

2) Understructure made of 18 mm Pre-lam MDF Board and modesty is also made of 18mm thick PLMDF board with 0.8 mm PVC

edge banding on concealed edges and 2mm thickness PVC Banding on exposed edges. Both end 18mm Thick Vertical Board for

supports (Throughout the width), At Middle of the Table Bottom 02 numbers of 18mm Thick MDF Board (Throughout the length) with

6 SEATER LIBRARY provision of Wire Management under the both verticals. At bottom 2 numbers of 18mm Thick Diagonal support to the table top (on

28 READING/STUDY both side), which will act as leg privacy as well as support structure for the table top. Each 27 30,000.00 8,10,000.00

TABLE 3) Above the table top 100 to 150 mm box Understructure (as shown in the image) 18 mm PL MDF with 2 Nos. of each switch &each

socket on both side.

4) The PLMDF board should have heavy duty nylon shoe at the base.

5) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer -

1) Providing, fixing in position Library Reading Chair: Dimensions

Seat Height = 473 mm

Seat Size (front) = 480mm

Seat Size (Back) = 460mm

Back rest Height = 530mm

Back rest Width = 460mm

All Leg Size = 48x48mm (tapered design upto 32mm)

Horizontal Tie Bar = 32x32mm

2) Material & Wood Type: OAK Wood & Plywood (IS 710)

LIBRARY READING 3) Seat&Back Rest: Chair top made up of Molded Plywood (12mm Thick) and cushioned with High Density P.U. foam to the table

TABLE CHAIR wooden seat. Horizontal support of size 18mm x 50mm at bottom of table top on 4 sides to withstand the load. The back rest should

have 5 Vertical supports. Outer two should be of size 40mmx30mm and the size should be reduced accordingly to match with the

leg support near the seat. Inner two vertical support should be 40x20mm and Center/middle vertical support should be of 75x20mm

4) Cushion: High Density cushion should be provided with a minimum thickness of 50 mm. The leatherite upholstered seat with high

density foam should be pasted as per the standard procedure (as per the instruction of the Engineer In-Charge).There must be

25mm thick cushion on the back rest at the middle support of the chair.

5) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer -

1) Stacks / Archive & Rare Collection:- Double sided Cantilever shelving Module 2400mm (L) X 600 (D) X 2100 (H).

2) Providing, supplying/ fabricating and placing/ Installation in position Back to Back Cantilever shelving Module Welded Frame

Upright with base shelf and adjustable shelves. Canopy brackets fixed to welded frame upright. Module having one base shelf and 5

adjustable shelves with clear height between each shelf to be 330 mm.

3) Welded Frame Upright to be made of 2 mm thick fully welded superior quality MS powder coated rolled form section or standard

closed section with slots at pitch of 25 mm. Frame having intermediate tie member for extra strength.

4) Base shelf Shelve Tray to be made of 1 mm thick superior quality MS CRCA powder coated sheet with bottom stiffner made of 1

STACKS/ARCHIVE &

30 mm thick MS CRCA powder coated sheet skirting to be made of 1 mm thick superior quality MS CRCA power coated sheet end Each 32 25000 800000

RARE COLLECTION

bracket to be made out of 1.6 mm thick MS CRCA powder coated sheet. Base support is made out of 1.6 mm thick MS CRCA powder

5) Canopy bracket made up of 1.6 mm thick MS CRCA powder coated sheet, fixed to welded frame upright. Metal finish all metal

components are colour with powder coating not more than 60 micron. Wooden cladding of 25 mm thick Pre-laminated MDF.

6) Name Tag:- There should be name tagging holder made up of Fiber for tagging of name for each of the Book Rack storage unit.

7) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer -

8 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Overall Sizes:(L)2140 mm X ( W)990 mm X (H) 560 mm with +/- 5% tolerance.

It should be three section bed having adjustable headrest, backrest and leg section. It should have adjustable height.

Three sections top should be made from 18 G C.R.C. sheets uniformly perforated and should be suitably fitted to the main frame.

Should have radiolucent back section with X ray casset holder.

Head & foot board: Head & Foot board should be made of blow molded Poly propylene with anti-microbial additives. Removable PP

head board and foot board should have cut outs for better gripping.

Castors: 125mm wheel dia, with PU tread synthetic body castor, non marking castors. Out of 4 castors two should be provided with

b brake, mounted at diagonally opposite position.

Side rail: The bed should be provided with one pair side rails pull to turn down collapsible type. Side rails should be made of MS ERW

31 SEMI FLOWER BED tube having 25.4mm dia and 1.6 mm thick. The side rails should get locked when raised. The knob should be made out of Injection Each 7 20000 140000

molded Nylon for ease of operation. The locking of side rail pin should be fitted with SS liner to prevent rusting and wear and tear.

Side rail joints should have plastic bushes and couplings.

All metal components should be pre-treated and then powder coated with anti-microbial epoxy pollster powder coating.

Should be supplied with 100 mm mattress and made of 40 density pu foam. The mattress should have cover which is water

resistant, x ray permeable, fire retardant. Suitable good quality buffers at four corners of bed.

IV Pole: Bed should be provided with SS made telescopic saline stand with 2 nos SS 304 made hooks for holding saline bags.

Provision to hold IV stand & Urinary Bag/Drain Bag holder. IV Pole: Bed should be provided with SS made telescopic saline stand

with 2 nos SS 304 made hooks for holding saline bags. Provision to hold IV stand & Urinary Bag/Drain Bag holder.

Should have two section couch fixed with a Rexene upholstered top of minimum 60 mm thick .

should have electro mechanical motion control for height by handset or by embedded control panel, backrest should be adjustable by

gas spring mechanism body frame work made from 20 G MS sheet fitted with SS304 grade legs Length 1800-2000mm, width: 600-

800mm,Height adjustment: 500:850 mm (+-10%) Backrest Angel 0-60 degree or more .

Should have a safe working load 135 kg. should have built in paper roll holder of SS304 made.

Power supply: Power input to be 23D Vac/230Vac, 50-60 hz as appropriate, fitted with Indian plug with rechargeable battery backup

of at least 1 hour . standards and safety: Electric supply conforms to standards for electrical safety IEC 60601-2-52 should be

USFDA Certified or European CE Certificate from 4 digit notifying body or Manufacturers EC Declaration of conformity along with ISO

32 EXAMINATION COUCH Each 3 30000 90000

13485 Certificate issued by a CE 4 digit notified body, Manufacturer should be ISO 9001 certified for quality standards, the certificate

copy of the same should be submitted along with technical bid, electric shock protection : level class B Electric current protection

Class-1. Liquid ingress protection :P54 should have a local services facility. the services provider should have the necessary

equipment recommended by manufacturer to carry out preventive maintenance test as per guideline provided in the services

/maintenance manual. This table has backrest function that can be operated with help on control panel. There is a provision for

storage with lock integrated. This examination table is motorized operated. All the MS parts should be treated with nine tank pre-

treatment procedure with HSCC/AIIMS/IPD Block Fur/AIIMS-Guntur/2022 Page 8 zinc phosphate and powder coated with

antimicrobial and thermosetting epoxy polyester to control the bacterial growth. Examination C.

Supply and installation of Revolving stools SEAT ASSEMBLY: The seat should be made up of 1.2 cm thick Commercial Grade plywood

with moulded Polyurethane foam and are upholstered with replaceable fabric covers.

SEAT SIZE: Diameter 40.0 cm The upholstery is available in Leatheriteiteite cloth and Fabric.

ADJUSTMENTS: 360 Degree Revolving type

BACK SIZE: 45.0 cm (W) covered with PU foam. support for extra comfort. The upholstery is available in Leatheriteiteite cloth and

MEDICAL STOOL BACK ASSEMBLY: The back foam is designed with contoured Lumbar

33 /CHAIR POLYURETHANE FOAM: The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness 20 +/- 2 on Hampden Each 10 4,000.00 40,000.00

machine at 25% compression.

HEIGHT ADJUSTMENT: The manual height adjustment is very easy to operate with a help of a knob. It can be easily locked at the

most comfortable position.

PEDESTAL ASSEMBLY: The five-prong pedestal is fabricated from 0.2cm. thick CR steel, powder coated and fitted with an injection

moulded black Polypropylene Hub Cap and 5 nos. twin wheel castors.(Castor wheel diameter 5.0cm.) The pedestal is 55.0cm pitch-

circle diameter (65.0 cm with castors). Circular foot ring of dia. 520 mm made from 19 mm dia. MS ERW Tube for foot support in

High-base stool.

TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon.

9 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

3 Fold bed side screen should be a portable screen on castor having three screen which should be folded to provide privacy in ward.

Overall size 2637mm (l)x1720 mm (h) x640mm (width for the base support) (± 10% engineering variation). fix frame of erw tube of

section 25.4 mm dia. and thickness 1.2 mm. movable frame of erw tube 19.05 mm dia. and 1.2 mm thick.

MALE & FEMALE Flexible frame should have plastic hinge which can be adjusted in provided space. leg frame should have erw tube of sq 30 section

34 WARD and 1.6 mm thickness. 50 mm heavy dutycastor wheel with locking arrangement provided for ease of movement, plastic bush for Each 7 9,000.00 63,000.00

BED SIDE SCREEN folding pipe.

Screen should be of casement fabric for the privacy screen which is opaque for providing modesty. powder coating of epoxy polestar

finish of thickness 50to60 micron. pre–treated chemically in eight tank pre–treatment system 3 fold bed side screen as approved by

engineer in-charge/employer.

Back /Unit of Size 1200 X 450 X 750 mm.

All made of 18 mm MDF Pre-Laminated storage shall have Three Doors and a horizontal shelf inside it to make it two compartment

in each storage unit. Shelfs should be made up of 18mm PLMDF Board. Back panel made up of 12mm. Skirting height should be

35 SIDE /BACK UNIT Each 33 7,000.00 2,31,000.00

50mm. Should have Heavy duty nylon base/shoes.

Brass Handle of minimum length of 150mm. Locking arrangement in the 2 Shutter/Storages.

All exposed edges are sealed with 2 mm thick PVC Tape and concealed edges in 0.8 mm thick PVC Tape on Throughfeed Machinery

1) 4 Seater Round meeting table size: 1200mm Diameter x 750mm H.

2) The design should be similar with image shown and colour shall be finalized later or after approval of sample.

3) ± 5% Engineering Variation Top shall be 25 mm thick base material shall be 25 mm thick pre-laminated MDF board 2 mm thick

PVC edge banding on the edges.

CABIN TABLE - 4

4) The vertical cladding shall be 18 mm thick base material shall be 18 mm pre-laminated MDF board.

Seater Round meeting

5) Legs and Top/Bottom plate shall be made from 1.6 mm Matt silver Anodized Aluminum extrusion.

6) Legs Assembled together with 8 mm thick MS powder coated sheet at bottom and 3 mm thick MS powder sheet coated at the top.

Diameter x 750mm H.

The MS base shall be having provision for wire entry and glide fixing . Access Flap and Switch Mounting Tray made from matt silver

anodized aluminum extrusion and plastic molded components to facilitate access of electrical/data/voice sockets access from km top

Meeting Table. Provision of 2 Switch & 2 Socket on both opposite side of the bottom support and as per the final approval by the

HIGH BACK CHAIR SIMILAR TO PICTURE WITH OVERALL DIMENSIONS 1225MM HT X 680 mm (W) x 700 mm (D) approx.

Supplying and placing in position of high back mesh chair in black colour with matte finish. High back 360° degre revolving chair.

Overall size is: 640mm(l)x 670mm(d)x 1350mm(h) , The chair made of full mesh in black colour. It will come in matte finish about

style type is modern.

Details Features/Specifications: -Arms:armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed

BWR Plywood (IS Grade - 303 for seat). Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best

quality cushioning in seat, Back : frame of design shall be curved made of two pieces injection moulded frame cover with mesh.

37 LIBRARY CHAIR Each 343 11,500.00 39,44,500.00

Backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x

500mm(d)x 540-440mm(h) & the back size is 480mm(l)x815mm(h),Seat maximum height is 540mm & minimum height is 440mm

& back height from floor maximum height is 1350mm & minimum height is 1250mm. Gas lift 100 mm telescopic hydraulic. Base:

650 mm chrome prong base is 620mm pitch center dia (660mm with castors).

The Chair design should be made and supplied as per the images shown in the specifications and as per the instruction of the

Engineer In-charge. The sample should be shown before bulk production of the product.

10 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

U' Shape Counter of Size 3000 L X 2400 depth X 1050 mm (H) at 2nd Level X 750mm at 1st Level of Top , Made of 25 mm thick

MDF and cladded with 12mm mm thick Corian. Front Ficia also having corian panel. Complete with Storages. All Material should be

PLMDF confirming to the IS:12406:2003&IS:14587:1998.

Table Top thickness 25mm for the Both the levels.200mm width on all the sides of the 2nd Level. A projected Design should be

made on front side after the 2nd level and should have height of minimum 700mm. Minimum 6 Nos Grommet should be provided.

Understructure vertical support should be provided at maximum C/C distance 1200mm. The vertical PLMDF support should be of

thickness 18mm.Wire management provision should be provided with vertical raceway and horizontal raceway. Minimum 6 Nos of

sets Switch & Socket with RJ 45 point should be provided under the table. Each set should contain 2 Switch & 2 Socket and 2 LAN

Point. 6 Nos of CPU Trolley should be provided for CPU volume of 14 Ltr. End of the table Full Height Modesty Should be provided

and at all outer full Height Modesty should be provided. The Modesty thickness should be 18mm Thick.

4 Pedestal Drawer should be provided at each corner.

ISSUE AND RETUN

38 Pedestal: -One Pedestal is required under the table. Pedestal of Size 400mm x 450mm x 675mm Carcass: - Top, Side Panel, Bottom Each 1 40000 40000

& Skirting Panel of Dark shade are made up of 18mm thick Pre-laminated MDF board with proper grooving done near to back side

edge for fitment of back panel made up of 9mm thick pre-laminated MDF board . The Side panel, Bottom and Top panel are to be

assembled with the help of wooden dowel, knock down fittings Drum with screw and corner fittings to ensure stability of box

structure formed.

Drawer & Shutter details: - Provision of two book Drawer of size 314mm(W) X 400mm(D) X 80mm(H) and one File Drawer of size

314mm(W) X 400mm(D) X 225mm(H) made up of 12mm thick Pre-laminated MDF board with bottom panel of 9mm thickness. The

small drawers are mounted on Telescopic slide with 3/4 extension. where Big Drawer mounted on Telescopic slide with full extension

allowing storage of files with the help of file manager. Drawer facia of Lighter shade made up of 18mm thick pre-laminated MDF

board. Provision of centralize locking for all three drawers and pull Handles for Drawer.

Product Specifications:

Supplying and placing in position of fix cantilever chair sku : Rich/37815/CN/A, All over size is : 610mm(L)x 505mm(D)x 990mm(H)

,The chair made of full Leatherite in black colour . It will comes in matte black finish in contemporary style . Details : - Arms :

chrome finish arms with pu padding . Use of ply: 12 mm thick hot pressed BWR plywood (IS Grade - 303 for seat and back) .Seat:

40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , Back : 40 ± 2 mm

thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back . backrest support foam , sign

based on symmetrical lumbar support backrest support . Only seat size is 610mm(L)x 505mm(D)x 485mm(H) & the back size is

610mm(L)x 540mm(H) , Base : chrome finish tublar frame of cantilever type . The Bottom legs should have 4 nos of heavy duty

The visitor chair carry on the fine line set by the office swivel chair. As cantilever chair it impress users and observers alike with their

SENIOR STAFF clear, distinctive design. The Chair cantilever should give user to extraordinary comfort.

The chair back should have ergonomically contoured and should have wide back form. The bio flex lumbar support should be made

from engineered plastic is flexible yet provides firm support to the back. The structural mesh should allows free movement of air

eliminating odour.

The chair should have Saddle shaped armrest moves synchronously with back movement giving continuous elbow support during

recline postures. The optimal armrest height should not dash against worktops and the it should not lead to armrest damage over

The chair should be certified with BIFMA Level 2, Green Guard and IAQ certifications. The chair should be of GRIHA Certified product.

11 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Active Bio Synchro Mechanism

The Chair should have Active Bio-Synchro Mechanism to senses the body weight and tilts accordingly even as the seat glides in

tandem with the back. This provides full contact and continuous support to the back in all positions. The chair comes with a 5

position tilt limited.

T- spine structure

This supports the contoured chair back, providing flexibility in the back height adjustment. This structure also called as the

"Wishbone Spine" of the chair can be adjusted vertically along the back of the chairs, allowing the user to chose a setting that gives

optimal comfort.

Leatherette Upholstery

The seat and back are upholstered with leatherette. The upholstery stitched with care and lasting perfection has been crafted

carefully to lend them outstanding class and durability.

FACULTY Height adjustable arms

VISTING CHAIR The wide, soft edged PU armrests provide complete support to elbows and forearms without the need of a swivel feature. The height

of the armrests can be adjusted as per need.

The Chair design should be made and supplied as per the images shown in the specifications and as per the instruction of the

Engineer In-charge. The sample should be shown before bulk production of the product.

The chair comes with BIFMA Level 2, Green Guard and IAQ certifications.

Colour: Shall be finalised during placing of order or as per the approval of IIM.

Dimensions W x H x D (cm)

Seat Height Min : 44.8 cm

The Chair should have free body movement in grace and style. The chair must have Active Bio Synchro™ mechanism and Bio-Flex™

Lumbar Support and European Styling with new age materials, the chair strikes a perfect balance between function and ergonomics.

Weight Sensing Mechanism

The Active Bio-Synchro mechanism should have automatically adjusts the tilt tension based on the user’s body weight. On reclining,

the seat glides backwards and provides uninterrupted back support thereby increasing seating comfort. The Back rest & arm rest

must have provide simultaneously provide the tilting mechanism/push back mechanism as per the body weight. The seat. The push

back mechanism must have adjustment leveler to adjust the push mechanism as per the user requirements. The seat should be

adjustable and have locking arrangement to hold the seat at the user’s convenient height.

Leather Upholstery

The seat and back are upholstered with pure leather. The upholstery stitched with care and lasting perfection to meet outstanding

class and durability.

JUNIOR STAFF & Saddle Type Armrest

MEETING ROOM The Saddle shaped armrest moves synchronously with back movement giving continuous elbow support during recline postures. The

CHAIR optimal armrest height does not dash against worktops and hence doesn’t lead to armrest damage over time. Adjustable Height

minimum of 60mm. Arm Rest should be adjustable vertically and horizontally with auto holding mechanism as per the user

Should have heavy duty castor wheel with CP Leg.

The Chair design should be made and supplied as per the images shown in the specifications and as per the instruction of the

Engineer In-charge. The sample should be shown before bulk production of the product.

The chair should have certifications with BIFMA Level 2, Green Guard and IAQ certifications. It is a Griha Certified product.

Colour: Shall be finalised during placing of order or as per the approval of IIM.

Dimensions W x H x D (cm)

Other Dimensions: (+- 10mm)

Back Rest Size : 460mm x 550mm (H) (+- 10mm) from the Seat Top

Seat Size : (450 to 510) mm x 470mm (+-10mm)

12 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Dimensions (Per Panel) – Should be as per the requirement of the , This means that one can use one or three panels depending on

your own needs.

Partition room dividers can provide with just the right amount of privacy in multiple occasions, such as office rooms

PARTITION WALL Partition screens are made of a strong Aluminum Frame with Pre-Lam MDF board on both side at Bottom and Toughened Glass

42 WITH PLMDF & GLASS (8mm Thick) with film for privacy. The frame should be fixed on the floors with help of Anchor Fastener and Heavy Duty Screws and SQM 150 2,500.00 3,75,000.00

INCLUDING FILM the partition should be fixed properly for long durable of the partition. The partition wall should be of 75mm Thick. The Partition

height should be of 1500mm Height and may be decreased or increased as per the office rom requirements. The PLMDF height

should be 1200mm and Glass Hieght should be 300mm.

PLMDF confirming to the IS:12406:2003&IS:14587:1998

Active Bio Synchro Mechanism

The Chair Active Bio-Synchro Mechanism should senses the body weight and tilts accordingly even as the seat glides in tandem with

the back. This provides full contact and continuous support to the back in all positions. The chair comes with a 5 position tilt limited.

T- spine structure

This supports the contoured chair back, providing flexibility in the back height adjustment. This structure also called as the

"Wishbone Spine" of the chair can be adjusted vertically along the back of the chairs, allowing the user to chose a setting that gives

optimal comfort

Leatherette Upholstery

The seat and back are upholstered with leatherette. The upholstery stitched with care and lasting perfection has been crafted

carefully to lend them outstanding class and durability.

Height adjustable arms

FACULTY CHAIR - The wide, soft edged PU armrests provide complete support to elbows and forearms without the need of a swivel feature. The height

MARVEL of the armrests can be adjusted as per need.

The Chair design should be made and supplied as per the images shown in the specifications.

The Chair design should be made and supplied as per the images shown in the specifications and as per the instruction of the

Engineer In-charge. The sample should be shown before bulk production of the product.

Colour: Shall be finalised during placing of order or as per the approval of IIM.

Dimensions W x H x D (cm)

Seat Height Min : 42.7 CM to 52.7 CM

13 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

The Chair should be made up of OAK Wood.

Chairs are made up of OAK wood with Wooden back support with Cushion on it of 50mm thick. Chair top made up of Molded Plywood

(18mm Thick) and cushioned with High Density P.U. foam to the table wooden seat. Provision of Heavy Duty Nylon bush at bottom

of Legs to avoid scratches on delicate surface.

Seat height 500 mm

Foam Thickness 50mm

Chair Top Hieght 1300mm

Seat Size (front) = 480mm

Seat Size (Back) = 460mm

Back rest Width = 460mm

44 VIP CHAIR All Leg Size = 48x48mm Each 15 25000 375000

Hand crafted Beautiful design, Floral carvings, Tapered, Curvature, Circular & design on back rest, arm rest, legs and one each

wooden frame of the chair as shown in the image or as per the instruction of the Engineer In-Charge.

Seat & Back Rest: Table top should be 18mm Thick wooden type, Back Rest & Seat Top should have wooden frame with cushion on

Cushion: High Density cushion should be provided with a minimum thickness of 50 mm. The Fabric upholstered seat with high

density foam should be pasted as per the standard procedure (as per the instruction of the Engineer In-Charge). There must be

50mm thick cushion on the back rest of the chair.

Material: OAK Wood, Fabric Wipe Clean Type,

The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer - In

– Charge with all complete work of chair for better aesthetic view.

Right hand and left hand opening doors.

Mounting on door panel or door frame.

Door weight up to 60kg.

Door panel up to 1200mm width.

Door opening up to 180-degree width

45 DOOR CLOSER Adjustable closing and latching speed Adjustable closing speed in two independent ranges (15-180 Degree & 0 to 15 Degree) Each 150 2,200.00 3,30,000.00

Door Width upto :1100 mm width

Product Sub Type Hydraulic

Withhold-open function

Weight 1.2 to 1.5 kg

Material high density polyethene, Flame retardant and non-toxic type.

Dimensions - Should be as per the actual dimension of the Window.

Special feature : light filtering, uv protection.

The blinds should be opaque type.

Supply, Assembly and Installation of manually operated roller blinds for Windows of all Offices.

Pre-fitted with a wooden frame allows easy installation. it can be installed using screwing in the wall as well as tying directly to a

46 ROLLER BLINDS grill. SQM 600 1,076.00 6,45,600.00

Crank handle used to lower or raise the curtain, simply use the provided hand crank rod on the side for easy chain operation type.

Roller blinds are designed to support both the inside & outside mounting. The Framing & Rail support should be installed with all

complete as per the instruction of Engineer-In-Charge. Material should be of Aluminium Polyester Powder coated type.

14 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Made of Abstract Quality Black out range, fabric with thickness-0.5mm, Weight 320Gsm (± 5%), Tearing Strength (warp) 5.8 Kgf.

Bursting Strength- 30Kgf, Colour Fastness to light- 5 to 6, Width 230cms As per required size for different windows in different

Control unit: Made of high strength reinforced plastic. The clutch is of wrap spring design. High carbon steel springs are provided to

transmit motion from driving to driven members of clutch mechanism. Clutch is operated directionally by the use of endless beaded

chain. Clutch never needs any adjustment.

Idler: Made of high strength reinforced plastic, consisting of a centre shaft and mounted on the bracket by using a plastic lock. The

metal sleeve inside the plastic lock provides bearing surface for the centre shaft, which rotates freely, providing smooth, quiet and

long wearing operation.

Head rail: Made of aluminum extruded rail Power coated in white. Control unit and Idler are mounted on the Head rail with powder

coated M.S. brackets.

47 VERTICAL BLINDS SQM 400 1076 430400

Roller tube: Made of an anodized extruded tube of high strength alloy. Control unit and Idler are fixed to the either ends of the tube.

The fabric of the blind is to be fitted to the tube with heavy duty

Bottom rail: Made of an aluminum extruded rail with a groove for fixing the fabric and power coated in white and to be fixed to the

bottom of the fabric and the purpose of it is, to keep the fabric in tension and straight. The fabric is to be fitted to the tube using

plastic insert along with the end caps of the tube are ABS.

Operating chain: Made of 4.5mm plastic beads molded on 2.2mm thick polyester chord with 6mm pitch of the beads. The chain

drives the sprockets of the control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect

match for trouble free operation.

Fixing brackets & clamps: Made of mild steel and zinc plated. The clamp is made up of spring steel of thickness 0.7mm and zinc

plated standard sizes as per manufacturer. (All specifications given are subject to standard tolerance.)

(5 nos. of lockers in 1 Column)

Thickness of Compact Laminate: : 3mm (Side & Back Partition) & 9mm (Top, Bottom, Shelves & Bottom Base)

Size of Column : 300mm (W) X 450mm (D) X 1800mm (H) Excluding 100mm Bottom Base

Size of Locker : 300mm (W) X 450mm (D) X 360mm (H)

Accessories: Standard – Aluminum, Stainless Steel - 304 Grade accessories)

a)Aluminum Interlocking Supporting Channels

b)CAM LOCK –THREADED P-MCL2-25

c)SS Hinges – Stainless Steel

d)Door Stopper- Rubber Lining

Tier/Lockers in 1

e)SS Screws & PVC Wall Plugs

Special Note - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438.

Dimension : 300mm Each

48 All accessories shall be made of SS and Aluminum. The door, side & back and top & bottom shall be High Pressure Laminates (HPL) 15 26000 390000

(W) X 450mm Set

Compact Board. Merino Grade HPL compact board are manufactured from sheet of special kraft and décor paper, impregnated with

thermosetting synthetic resins which are together under heat and high pressure (110 Kg/cm2 at temperature of about 150°C).

Excluding 100mm

Merino HPL compact board has laminates on both sides with suede finishes melamine. The performance of the board is tested

according to Standards EN438 - 4 (Equivalent to Indian standard IS-2046) (Boiling Water, Fire Rate, Impact, Stain, and Scratch.

DOORS All doors shall be of 9 mm or 12 mm thick HPL compact board.

SIDE AND BACK DIVIDER All doors shall be of 3 mm thick HPL compact board.

TOP AND BOTTOM DIVIDER All doors shall be of 9 mm thick HPL compact board.

ACCESSORIES Each restroom cubicle will be equipped with the following accessories Standard - Aluminum + SS. Lockset Hanger Rod

(If required) SS Hinges Aluminum Interlocking supporting frame

15 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

1)Providing Placing and installing 8 Seater Dining Table of size 1800 X1200X 750mm

2)Table should be made up of OAK Wood.

3)Table Top of 25mm thickness Supported on Wooden Framing finished with Melamine Wood polish. Provision of Heavy Duty Nylon

bush at bottom of Legs to avoid scratches on delicated surface. Support should be provided at the center of the table top for stability

DINING TABLE of table top. The Joinery are standard hardware and fasteners required for knock-down fittings.

8 SEATER MDP 4) Dimension & Sizes details: Table Top – 25mm, Leg Support – 75mmx75mm (tapered design upto 50mm), Top Tie Beam under

Table Top – 25mm (Thick) x 75mm (H) x Length as per the dimension of table. Center Tie Beam to support Table Top – 25mm

(Thick) x 75mm (H).

5)The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of

Client/Engineer - In - Charge.

1)Providing Placing and installing 8 Seater Dinning Chair.

2)The Chair should be made up of OAK Wood & Ply-Wood (IS-710).

3)Chairs are made up of OAK wood with broad strips at back support. Chair top made up of Molded Plywood (12mm Thick) and

cushioned with High Density P.U. foam to the table wooden seat. Provision of Heavy Duty Nylon bush at bottom of Legs to avoid

scratches on delicate surface.

Seat Height = 473 mm

Seat Size (front) = 480mm

Seat Size (Back) = 460mm

Back rest Height = 530mm

DINING TABLE CHAIR Back rest Width = 460mm

50 8 All Leg Size = 48x48mm (tapered design up to 32mm) Each 48 8000 384000

SEATER MDP Horizontal Tie Bar = 32x32mm

4) Seat & Back Rest: Table top should be 18mm Thick. Horizontal support of size 18mm x 50mm at bottom of table top on 4 sides to

withstand the load. The back rest should have 7 Vertical supports. Outer two should be of size 32mmx32mm and the size should be

tapered/reduced accordingly to match with the leg support near the seat. Inner all vertical support should be 25mmx20mm size.

5) Cushion: High Density cushion should be provided with a minimum thickness of 50 mm. The leatherite upholstered seat with high

density foam should be pasted as per the standard procedure (as per the instruction of the Engineer In-Charge). There must be

25mm thick cushion on the back rest at the middle support of the chair.

6)The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Engineer -

16 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

1) Providing, supplying/ fabricating and placing/ Installation in position Double bed of size 2100mm (L) x 1900mm(W) X900mm

(H)(+- 20mm) overall height with top plank height of 450mm from floor.

2) The Head board and foot board are made in 25mm thick Pre-laminated MDF with Decorative PVC foiled Top trim of 40mm

thickness fixed on it from top side and D headed aluminum section is inserted in it to create a pleasant look.

3) The full size Side rails and a middle and vertical separator are made up of 18mm thick Pre-laminated MDF board with plank

support batten of 25mm thick Pre-laminated MDF fixed on it from inside.

4) The Head board, foot board and side panel with middle vertical support are fixed to each other with universal fixture bracket

made up of 1.5mm thick CRCA and finished in zinc platting. The Head board and foot board are also supported with additional middle

support member made up of M.S. Rectangular pipe of 40X20X1.5 mm thickness which also act as the support for top plank.

MDP EXECUTIVE 5) Top plank is made up of 18 mm thick Pre-laminated MDF board and bottom planks are made up of 12mm thick pre-laminated

51 BED MDF board placed on supporting blocks of same material. The Top plank is separated in four equal parts which make it easy to open Each 31 45000 1395000

WITH SIDE LEDGE while using the storage place underneath it.

6) Overall structure is strengthened M.S. Frame made with M.S. Sq. Pipe of size 25x25x1.5mm thick an 50x25x1.5. All the exposed

edges are to be sealed with 2mm thick PVC Edge band and all non-exposed edges with 0,8mm thick PVC edge band pasted with the

help of industrial hot melt glue on through feed edge-banding machine.

7) All the metal components are to be treated for anticorrosion treatment and epoxy powder coated up to 50 microns. The bottom

protector antiskid nylon bush are to be fixed to the headboard footboard, side rails and middle support to avoid direct water contact

8) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of

Client/Engineer - In - Charge.

Overall Dimension 3400mm (W) X 465mm(D) X 2100mm (H). The Width and Height may increase or decrease by +- 100mm. The

Depth of the Dressing Table 300mm, Table & Luggage Rack is 500m after wall cladding.

1)Combined Wall Unit Console-Providing, assembling and fixing of full wall unit of the above mentioned size with Pre-laminated MDF

board (As per the IS:12406:2003&IS:14587:1998)

2) Combined Full Wall console unit is made of 18 mm Pre-laminated MDF and consisting of Understructure has provision for

Multipurpose Table with Cupboard (Shutter with Drawer), Dressing Table with drawer & Open Shelf, Mirror for Dressing Table, Open

Luggage unit, Full wall Cladding with Switch &Sockets.

3) Multipurpose Table with Cupboard: Table top is made up of 25mm PLMDF Board with post form type on front side. The legs are

18mm PLMDF Board, Grommet for wire Management, Cupboard width should be 500mm with 150mm Height Drawer and Shutter

having all sides louvers for ventilation. The Table height should be of 750mm with Leg Support including the skirting 75mm. The

table should have Foot rest made up of 18mm PLMDF. Modesty Panel throughout the back panel. Stiffener should be provided for

better stability

4) Dressing Table with drawer & Open Shelf: The Dressing Table Height should be 450mm including the skirting 75mm. The width of

the Dressing table is 800mm. Having a Drawer of Height 150mm and open shelf at the bottom. Table top 18mm PLMDF with Post

FULL WALL form type. The corner should be smooth curvature type for safety and smooth movement.

52 COMBINED 5) Mirror for Dressing Table: Mirror dimension 450MM x 1200mm. The thickness of Mirror Glass is 5MM. Back panel of the mirror is Each 31 40000 1240000

UNIT WITH MIRROR to be supported with 10mm thick pre laminated MDF Board. Outer side 40mm width edge cladding/support should be of 18mm thick

Pre laminated MDF. All the MDF board should have 0.8mm thick PVC edge band & also post form type pre-laminate to have smooth

finish & aesthetic look of the mirror.

6) Open Luggage unit: The Luggage Table height should be 600mm including skirting 75mm. The table top should be 25mm PLMDF

board with post form type. Under the luggage rack should be of open rack type for luggage. Stiffener should be provided for better

7) Full wall Cladding with Switch & Sockets: The wall cladding should be 18mm PLMDF board. Should be fixed on the wall with

fastener/Screws and adhesive and no Fastener/Screws should be visible to the outer side. Provision of Switch socket on the cladding.

(Existing switch & Socket should be Taken out and installed on the MDF board if any).

Complete wall unit with all tables shall be supported with 10 MS/Aluminum Legs to be fixed at each intersection points and skirting

of 75mm height with 18mm thick MDF board shall be cladded to cover up the legs. Suitable opening should be provided for the TV

unit and other appliances as per the site requirements.

The Shelf unit is with fixed shelves made in 18mm thick Pre-laminated MDF and the Openable drawer.

8) The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of

Client/Engineer - In - Charge.

17 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

1)Supply Installation of Curtain cloth with hanging provision Material: Polyester GSM Quality: 200 GSM

The Curtain should be cover the full Height Door of Size – 2500mm x 2500mm. Minimum 2 to 3 Piece Curtain should be provided or

as per the suitable requirement to meet the purpose of Clients.

Material care: Machine Wash, Hand Wash, Dry Clean.

Fabrics: 52% polyster, 48% Cotton

The Curtain should cover the width of 2400mm after the design of curtain with pleats. Lining should be provided for better blocking

53 CURTAINS There should be no issue of pilling, colour fading. SQM 220 1,000.00 2,20,000.00

The door curtain should have minimum lap of 150-200 mm overlap.

Color: Finalized during placing of the Order or after approval of sample.

Patterns: Stripes Fitting: Fabrics Loops Curtain cloth as approved by engineer in-charge/employer

The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Client/

Engineer - In - Charge.

Supply and installation of round type Chrome plated Curtain Rod with stainless steel (304 grade) bracket and pendent(as approved

by Engineer In charge/employer ), Diameter of rod shall be 25 mm, thickness of rod should be 1.8mm to 2.0 mm, loading capacity

minimum of 10 kg, Chrome plated Curtain Rod shall be rust proof, or as per approved by Engineer In charge/employer.

54 Supplying and fitting of Curtain Rod as per approval of client and size should meet the door opening width of 2400mm. RMT 90 300.00 27,000.00

CP BRACKET & CP

The door should have double curtain having minimum lap of 150 mm overlap.

Supply and installation of premium quality stainless steel crown highly durables and of rust proof quality as per shop drawings

specifications and direction of Client/ Engineer- In Charge.

The Chair should have free body movement in grace and style. The chair must have Active Bio Synchro™ mechanism and Bio-Flex™

Lumbar Support and European Styling with new age materials, the chair strikes a perfect balance between function and ergonomics.

Weight Sensing Mechanism

The Active Bio-Synchro mechanism should have automatically adjusts the tilt tension based on the user’s body weight. On reclining,

the seat glides backwards and provides uninterrupted back support thereby increasing seating comfort. The Back rest & arm rest

must have provide simultaneously provide the tilting mechanism/push back mechanism as per the body weight. The seat. The push

back mechanism must have adjustment leveler to adjust the push mechanism as per the user requirements. The seat should be

adjustable and have locking arrangement to hold the seat at the user’s convenient height.

Leather Upholstery

The seat and back are upholstered with pure leather. The upholstery stitched with care and lasting perfection to meet outstanding

class and durability.

SENIOR STAFF CHAIR Saddle Type Armrest

55 FOR MDP The Saddle shaped armrest moves synchronously with back movement giving continuous elbow support during recline postures. The Each 175 15000 2625000

optimal armrest height does not dash against worktops and hence doesn’t lead to armrest damage over time. Adjustable Height

minimum of 60mm. Arm Rest should be adjustable vertically and horizontally with auto holding mechanism as per the user

Should have heavy duty castor wheel with CP Leg.

The chair should have certifications with BIFMA Level 2, Green Guard and IAQ certifications. It is a Griha Certified product.

Colour: Shall be finalised during placing of order or as per the approval of IIM.

Dimensions W x H x D (cm)

Other Dimensions: (+- 10mm)

Back Rest Size : 460mm x 550mm (H) (+- 10mm) from the Seat Top

Seat Size : (450 to 510) mm x 470mm (+-10mm)

18 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Dimensions - 1981mm (L) x 1828mm (W) (78” x 72”) must be suitable for our Bed dimensions.

This orthopaedic mattress features a HR core for softness and a RC coir pad for firmness with a bonded foam core layer to relax your

muscles and provide advanced back support. It should provides optimal support to the back and maintains neutral spine shape no

matter which position you sleep

Mattress thickness - 152mm

HR Core (High-Resilience Core): The HR core is designed for softness, which can contribute to a comfortable sleeping surface. High-

resilience foam is known for its ability to quickly regain its original shape after pressure is applied, ensuring that the mattress retains

its softness over time.

RC Coir Pad (Rubberized Coir Pad): The RC coir pad adds firmness to the mattress. Coir, derived from coconut husk fibers, is

commonly used in mattresses to provide support and durability. The rubberized coir pad likely enhances the resilience and support of

Bonded Foam Core Layer: The bonded foam core layer is included to help relax muscles and provide advanced back support. Bonded

foam is created by adhering multiple layers of foam together, which can contribute to both comfort and support.

Optimal Back Support and Spinal Alignment: The mattress is designed to provide optimal support to the back and maintain a neutral

Orthopaedic Mattress

56 spine shape, regardless of the sleeping position. This is crucial for reducing pressure points and promoting healthy spinal alignment, Each 31 18000 558000

which contributes to a more restful sleep and helps alleviate potential back problems.

Product Specifications:

PU foam quilt for softness.

RC coir pad for firmness.

Straight RC pad core layer provides optimal support.

Should Keep the spine in good shape.

Should Provide complete back support.

Should have Straight Pad prevents sagging.

Warranty - 5 years

Cover: Cover Should be provided of suitable size. Luxe modal fabric that stays soft, fresh and breathable use after use. Comes with

unique, innovative comfort-adjustment zippers to change the Mattress from compact to fluffed up in an instant.

The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Client/

Engineer - In - Charge.

Product Specifications:

Molded flexi PU foam pillow for firm support to Head, Neck and upper spine.

Excellent comfort and Durability

CFC free make, environment friendly.

Encased in elegant polycot fabric for softness and feel.

Specially treated for protection against bugs and allergens.

57 PILLOW WITH COVER Size : 40.64cm x 60.96cm x 13 cm Each 62 2,800.00 1,73,600.00

5 year guarantee.

Cover Should be provided of suitable size. Luxe modal fabric that stays soft, fresh and breathable use after use. Comes with unique,

innovative comfort-adjustment zippers to change the pillow from compact to fluffed up in an instant.

Towel –Towel size 600mm x 300mm should be provided with the pillow. The towel should be of Cotton type . Soft & Comfort type.

The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Client/

Engineer - In - Charge.

Blanket Size - (92" x 106" Inches/233cm x 269cm) - King Size

Blanket with the Comforter of 500 GSM for Winter.

Blanket - Comforter Premium Quality, Quilted Comforter, Teal, Microfiber, lightweight

300 to 400 Thread Count (per square inch)

The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Client/

Engineer - In - Charge.

19 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Supplying and Placing in Position of Casper Solid Wood TV Unit size: (L) 1,660mm X (D) 400mm X (H) 300mm. Built with sturdy

solid wood with luxury look and iconic silhouette to exhibit appealing and distinctive wood grains . Must be Ideal for compact spaces.

TV UNIT FOR Open storage for TV accessories.Made up of Kiln-dried solid wood for high durability. Made from sustainably sourced beech wood. 5

59 DRAWING year unmatched warranty for hassle free service. Each 5 8,000.00 40,000.00

ROOM The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Client/

Engineer - In - Charge.

Display Size 108 cm (32 inch) or more

Screen Type LED

HD Technology HD Ready, Ultra HD (4K) 3840 x 2160 Pixels or higher

Smart TV To be ensured

HDMI 2 or more

Built In Wi-Fi Should be Present with Dual Bandwidth

Wall Mount Support To be included

Display Type LED

Refresh Rate 50/60 Hz

SMART TV ULTRA HD 

(4K) TV - 43 Inch Audio Features, Number of Speakers 2 or more

Speaker Output RMS Minimum 20 W

Smart Tv Features

Supported App - Netflix, Prime , Hotstar, Youtube and other apps from Play Store, Operating System Tizen/Android/Google

Screen Mirroring To be available

Bluetooth To be available in 5.0 or more, Built In Wi-Fi To be available, Dual Band

Connectivity Features, HDMI and VGA 2 or more for each

Power Features,,,Power Requirement AC 100 - 240 V, 50/60 Hz

Power Consumption 0.5 W (Standby)

The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Client/

Engineer - In - Charge.

20 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Display Size 138 cm (55 inch) or more

Screen Type LED

HD Technology Ultra HD (4K) 3840 x 2160 Pixels or Higher

Smart TV To be ensured

HDMI 2 or more

Built In Wi-Fi Should be Present with Dual Bandwidth

Wall Mount Support To be included

Display Type LED

Refresh Rate 50/60 Hz

Number of Speakers 2 or more,

SMART TV ULTRA HD Speaker Output RMS Minimum 20 W

(4K) TV - 55 Inch Smart Tv Features,

Supported App - Netflix, Prime , Hotstar, Youtube and other apps from Play Store

Operating System Tizen/Android/Google ,

Screen Mirroring To be available

Bluetooth To be available in 5.0 or more

Built In Wi-Fi To be available, Dual Band

Connectivity Features

HDMI and VGA 2 or more for each

Power Requirement AC 100 - 240 V, 50/60 Hz

Power Consumption 0.5 W (Standby)

The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Client/

Bin Type:- In - Charge.

Capacity : 8 ltr

Colour : Silver

Opening Mechanism : Step-on

Material: Stainless steel 304 Grade

Shape: Cylindrical

Finish type: Brushed

DUSTBIN 8 LTR SS Product dimension s : 25 L x 25 W 30 H Centimeters

304 Item weight: 1.5 kg

Dustbins must be lined with plastic or paper garbage covers of any size.

Mechanism- as the name suggests it is a pedal bin and is foot operated. Just press on the pedal and it will open.

Removable Inner Bin: Removable inner liner with a stainless steel carrying handle lifts out for easy disposing of garbage without

using plastic bags and easy cleaning the whole small garbage can.

21 Digitally signed by NEELESH

ITEM AND RATE AMOUNT

NO DESCRIPTION IMAGE UNIT QTY

LOCATION ( Rs.) (RS.)

Colour Multi colour

Special Feature Cordless, Concealed Heating

Package Information Kettle (1.5 L)

Product Dimensions 18.7L x 18.7W x 23.1H Centimeters

Included Components Electric Kettle

Product Care Instructions User Manual

Model Name HD 9306/06

Item Weight 0.87 Grams

ELECTRIC Food grade stainless steel, Frequency: 50 Hz. Cord length :0.75 m

63 KETTLE 1 LTR SS Wide opening for easy pouring and cleaning Each 36 2500 90000

304 Concealed heating element and cord winder

Steam sensor, dry boiling and overheating prevention, Frequency - 50 Hz

One touch spring lid helps to avoid scalding

360 degree cordless pirouette base, for easier handling

Warranty: 2 years on product

Power: 1800 watts; Operating Voltage: 220 volts

The work should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of Client/

Engineer - In - Charge.

Note: Contractor will provide written warranty of individual items for 7 years from the date of completion of works except ' BoQ Sl No. 34, 57,58,60,61,62,63' . To ensure compliance of warranty ,

contractor will provide separate Bank Gaurantee equivalent to 3% of the awarded cost valid upto the warranty period of 07 years . Security Deposit will be released only after submission of

separate Bank Gaurantee .

22 Digitally signed by NEELESH