Supply and Installation of decorative poles with 03 year AMC in I.A. Malwan (Fatehpur)

Supply & Fixing of 4.0 Mtr. long Decorative Ornamental Pole duly PU (Poly Urethane) Painted made of high tensile M.S Pipe. The Top section of pole must have Cast Aluminium Embellishments through out the length. Base Plate size 350x350x12mm with PCD of 350mm. Foundation bolts set of M16x450mdecorative pole made of Mild Steel with a total height of 4mtr above ground level with single arm bracket of ornamental decorative street light 60W and predefined laser cut pattern in in house laser machine in the top portion of the bracket of the pole as per design. Pole bottom base section shall be 220x220x1000mm, 2mm thickness column with three side predesigned laser cut and illumination. the surroundings in 20W with noticeable mode, top section pole of 90x3000x3mm & top bracket with laser cut pattern design one side of 1000mm to hold the street light of 60W as per shared drawing. The base plate of pole shall be of size 350x350x10mm. Provision for inside termination box with 4way connector & 01 No 06 A MCB for local isolation. light fixture shall be made of aluminium of size 600x580mm of street light distribution of 60W for area lighting. Light output of source is more than 110 Lm/W, CRI>80, SPD 4k, operating voltage 140-270V. Fitting is IP65, wired with Branded LED and constant current driver. Proper thermal management for longer life of fixture. LED burning of 50,000 hours. The pole is coated with UV stabilized powder coat and cured in in-house powder coating machine. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all accessories. Foundation bolts; Min 04 Nos made of EN8 grade steel should be used only for erection. A lockable door of suitable size should be provided at bottom section for termination and connection with Backlite sheet and connector, MCB etc. on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P. Bottom dia-350mm up to 1200mm height from base plate. Top section dia-90mm. Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect with 05 years warrantee. Technical specification, make & profile as approved by engineer in charge.CAT AA

Suppy & Fixing of 05 Amp to 6.0 Amp SP MCB in m S Box complete in all respect (Cat B) as per UPPWD Sch item no. 1001

Supply & laying of 63mm dia DWC HDPE pipe ISI marked along with all accesscries like socket, bend, couple etc. Confirming in IS 14930 part-II complete with fitting anf cutting jointing etc. througth horizental bering trenchless (75 cm below ground level) including excavation and refilling the trench but excluding and curhioning and proractive etc. complete in all respect.

Supply and wiring of sub main with 03 nos.of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as directed E/I (20 mtr Each Pole )

Supply and laying of 10 sq.mm 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie)..over a cushion of 75 mm. thick sand all around and protected. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.OEM must have it's own in house NABL accrediated Laboratory for testing procedure. All Material as per Technical specificition pre approved by Engineer in charge. (Cable laid in Ex. DWC Pipe) (Gloster, Grandlay, Polycab, Havells, KEI make)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN (as per UPPWD approved make list)

S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (c) 10 sq. mm

S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated, underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer- incharge as per UPPWD sch. no. 503 (b) 10 sq. mm 4 core

S/F of MS Earthing Rod (2500*20 mm) in verticaly ground level and connecting the pole with help of 6 SWG Wire including cost of all material men and T&P

Supply and laying of 25 mm x3mm G.I Strip from earth electrode directly in ground as required aspect as per uppwd sch no-716