Providing IEI and Air Conditioner to newly constructed additional accommodation above the Kitchen building at TGCE, Port Blair

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for light/ power plug with 2X4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

3 Module (100 mm X 75 mm)

6 Module (200 mm X 75 mm)

Supplying, installation, testing & commissioning of recessed mounted, round shaped, 9 watt (minimum) LED Hue light complete with its all accessories etc as required. Make : Philips Model No : Aphelion Round or its equivalent

Supplying and fixing of Dimmer switch suitable for control upto 10 nos of Hue led light. Make: Philips or its equivalent

Supplying, installation, testing & commissioning of recessed mounted, 11 watt (minimum) LED round downlights fittings having colour temperature of 3000 K/6500 K with all its accessories. Make: Philips Model : DN296B LED12S-6500 PSU WH or its equivalent.

Supplying of A.C. Ceiling fan having 1200 mm sweep, decorative type i/c down rod of standard length 30 cm with all accessories as required. Make: Orient Model No. AEROQUIET or its equivalent.

Supplying of A.C. ceiling fan having 600 mm sweep, decorative type i/c down rod of standard length 30 cm with all accessories as required. Make: USHA Model No :- Allure plus or its equivalent

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

Supplying, installation, testing & commissioning of recessed mounted, 3 watt LED spot light having colour temperature of 3000 K/6500 K with all its accessories etc as required. Make: Philips Model : Astra Spot COB 3W or its equivalent.

Supplying, installation, testing & commissioning of 17 watt (minimum) Slim LED Wall light having colour temperature of 3000 K/6500 K with all its accessories etc as required. Make : Philips Model No : 48027 (Ultron) or its equivalent

Supplying of metallic body Exhaust fan of size 230 mm sweep complete with its all accessories etc as required. Make: USHA Model No : Aeroclean or its equivalent.

Installation of exhaust fan in the opening, including cutting the wall for opening, making good the damage with cement mortar and paint to give good asthetic finish, connection, testing, commissioning etc. as per the instruction of E-in-C.

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way (4+24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying of 3.5 core X 35 sq.mm XLPE insulated armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS 7098. Make : Havells or its equivalent.

Laying of one number XLPE insulated armoured power cable of 1.1 KV grade of following size in the existing DWC HDPE as required.

Upto 35 sq. mm

Laying of one number XLPE insulated armoured power cable of 1.1 KV grade of following size on surface as required.

Upto 35 sq. mm

Supplying and laying of following size of DWC HDPE pipe, ISI marked along with all accessories like socket,tee, bend, couplers etc. conforming to IS 16203 (Part 24), 2018 (old IS 14930, Part 2,2001) completes with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

63 mm dia (OD-63 mm & ID-50 mm nominal)

Supplying and laying of following size of DWC HDPE pipe, ISI marked along with all accessories like socket,tee, bend, couplers etc. conforming to IS 16203 (Part 24), 2018 (old IS 14930, Part 2,2001) completes with fitting and cutting, jointing etc. on surface/wall including clamping etc as required.

63 mm dia (OD-63 mm & ID-50 mm nominal)

Providing and fixing of MCCB 100 amp, 35 KA breaking capacity, 4 Pole, 415 volts, 50 Hz along with SS Enclosures including its connections etc. as required. Make : C&S Model No- CSE1N125ATM4P-100 or its equivalent.

Fabrication and Erection of steel structure made up of ISA 35 x 35 x 5 mm (minimum) suitable for mounting 100 Amps MCCB with enclosure by maintaining operating height of 1.2 metre including painting with two or more coat of enamel paint of approved colour over a coat of metal primer.

M/s G K Construction

M K ENGINEERING