NIT NO. 237/Durg(Kawardha)/2026

Government of Chhattisgarh

KABIRDHAM (C.G.)

Estimated Cost- 24.99 Lacs

Distt. Kawardha (C.G.)

Executive Engineer

P.W.D. (B&R) kawardha Division

N.I.T. SCHEDULE FOR ANNUAL REPAIR UNDER ORDINARY REPAIR WORK OF ROADS AND BRIDGES UNDER DIVISION KAWARDHA

PAC RS. 24.99 LACS

S.NO. ITEM NO. PARTICULARS MEASUREMENT QTY UNIT RATE AMOUNT

1 2.3 Clearing Grass and Removal of Rubbish (clearing grass and removal of rubbish including all leads and lifts)

HELIPAD 3 50 50

2 3.2 Excavation in Soil (by Mechanical Means.) Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all leads & lifts as per relevant clauses of section 300.

APPROCH 1 60 60 0.1

HELIPAD CIRCLE 3X3.14 7.5 7.5 0.45

3 4.1 Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401.

Plant mix method (with Mechanically crushed stone only)

(a) For Sub-base cum drainage layer or upper sub-base with

(b) For Lower Sub-base with

(ii) Grading-VI Material

APPROCH 1 37 3.75 0.15

HELIPAD CIRCLE 3X3.14 7.5 7.5 0.15 Cum. 1536

4 6.3 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications^ For Village roads )

(i) P.C.C. M-10

HELIPAD CIRCLE 3X3.14 7.5 7.5 0.15 Cum. 3449

(ii) P.C.C. M-15

HELIPAD CIRCLE 3X3.14 7.5 7.5 0.15 Cum. 4312

5 4.24 Painting on kerbs in black & yellow alterante bands including cost of material and labour complete as per drawings and specification as per clause 803.

HELIPAD CIRCLE 3X3.14 15 0.75

GUARD WALLS 26 10 1

SPEED BREKER 40X6 7 0.3 504

6 5.2 Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503.

(i) Bituminous surface @ 0.25 kg / Sqm

SPEED BREKER 18 6 7 0.3 Sqm. 15

7 5.3 Bituminous Macadam Providing and laying bituminous macadam as per clause 504 with mixed prepared in minimum 40-60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction.

B With mechanical paver finisher

(ii) for Grading II (19 mm nominal maximum size aggregate, bitumen content 3.40%)

SPEED BREKER 20X6 7 0.3 0.1 Cum. 6190

8 4.24 Painting on kerbs in black and yellow alternate bands including cost of material and labour complete as per drawings and specifications as per clause 803.

With Road Marking Paint

9 4.25 Painting on concrete surfaces with black and yellow alternate bands including cost of material and labour complete as per drawings and specifications as per clause 803.

With Road Marking Paint

10 4.26 Painting on concrete surface of R.C.C. Railing (Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 Sq.m.) 25 10 2 0.9 Sqm. 170

11 8.18 Painting on Steel Surfaces (Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade) 50 10 2 0.9 Sqm. 71

12 8.3 Providing & Fixing tree studs in Square/ Round shape of 4” side/diameter made of Grade-C retro-reflective sheeting of Type-XI fixed on 2 mm aluminum sheeting (Confirming to IS:736-Material Designation 24345 or 1900) as specified in section 801.3 of MORT&H and fixing the same with four Nos. high strength nails confirming to IS: 1367 on trees at site each. 1 500 Each 74

13 1.5 Supply of mineral aggregate like broken stone/crushed stone (crushed in mechanical crusher) as per clause 520 at road site including all lead and stacking etc. complete.

v) 22.4 mm standard size Crushed stone 80 Cum. 1343

Vi) 13.2 mm standard size Crushed stone 80 Cum. 1176

vii) 11.2 mm standard size Crushed stone 80 Cum. 1188

viii) 6.7 mm standard size Crushed stone 80 Cum. 915

14 1.6 Supply of fine aggregate and filler material as per clause 520 including all lead and stacking etc. complete

iii) Moorum 80 Cum. 393

15 1.4 Hire charges for machineries : (only working hours to be paid and idle hours not to be paid) including fuel and manpower.

iv) Truck mounted water tanker 7 10 Hour 855

Vi) Hydraulic excavator of 1.0 Cum bucket 15 10 Hour 1050

vii) Road rollers :

d) Vibratory roller 7 10 Hour 1275

16 8.4 Retro- reflectrorized Traffic signs as per Clause 801 Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign digitally printed over reflectrorized sheeting of required grade confirming to ASTM D 4956 including covering with transparent sheeting (lamination sheeting) to protect from fading and damage due to wheather effect as perClause 6 of IRC:67-2022 made of retro-reflective type sheeting fixed over Aluminum/ Aluminium Composite Material (ACM) sheeting including application of fluorocarbon coating applied on exposed surface of aluminium to ensure corrosion resistance, supported on a mild steel back frame of ISA 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with Ml5 grade cement concrete 45 cm x 45cm x 60cm, as per approved drawing and painting all exposed components of the signs and supports with primer and 2 coats of epoxy paints or powder coating and the part of post

A Made of Class-C Micro Prismatic Grade Sheeting of Type XI confirming to Table 6.9 of IRC:67-2022 (for National Highways and State Highways)

a) With Aluminium Sheeting of 2 mm thickness

(iii) 900 mm x 750 mm rectangular 12 Each 8389

17 8.25 Providing painting figuring and numbering as per IRC specification complete for

(i) 5th kilometer stone 80 Each 348

(ii) Ordinary Kilometer stone 320 Each 152

(iii) Hectometer stone 800 Each 23

(iv) Boundary stone 800 Each 28

Sub Engineer Sub Divisional officer Executive Engineer

PWD (B/R) Sub Dn Pandariya PWD (B/R) kawardha Dn

kawardha(c.g.) Kawardha(c.g.)