REPAIRS AND POLISHING TO WOODEN FURNITURE UNDER GE C KIRKEE

Amount

CHAIR DINING CUSHIONED : REMOVING U/S COMPONENTS AND REPLACING THE SAME WITH SEASONED TEAK WOOD AS EXISTING (Drg No.FD/E6/MAP/10):- Front leg of size 410X 50 X35mm

Rear Legs of size 960 X 50 X 35mm

Front rail of size 430X 75 X 30mm

Verticle wooden batton at back of size 520 X 40 X 15mm

Stiffner of size 460 X 20 X 20mm

Brackets of seat

Top of back rail of size 430 X 50 X 30mm

Side rail of size 460 X 75 X 30mm

Removing unsv foam cushion of chair dining S & F 32 density 470x400x75mm 'U' foam cushioned, covered with leatherite cloth on 12mm thick ply wood as existing of approved shade & quality by GE/Engr-in-charge.

Polishing of chair dining with french polish to obtain glossy finish after preparation of polishing area with abbrassive cloth and as directed by Engr-in-charge.

CHAIR DINING : REMOVING U/S COMPONENTS AND REPLACING THE SAME WITH SEASONED TEAK WOOD AS EXISTING (Drg No. FD-279):- Front legs size 460x30x55mm

All as per item No 2 but Rear legs size 890x55x30mm

All as per item No 2 but Front rail size 420x65x30mm

All as per item No 2 but Rear rail size 430x65x30mm

All as per item No 2 but Side rail size 430x65x30mm

All as per item No 2 but Back Wooden size 440x45x15mm

All as per item No 2 but Stiffner size 440x25x20mm

Removing of existing cane cleaning of cane holes and recanning with 2 mm wide new plastic cane for seat and 3.5 mm wide cane for borders of chair all as per drg and as directed by Engr-in-charge. (For chair 0.40x0.39-0.156 Sqm)

Polishing of chair dining with french polish to obtain glossy finish after preparation of polishing area with abbrassive cloth and as directed by Engr-in-charge.

CHAIR EASY : REMOVING U/S COMPONENTS AND REPLACING THE SAME WITH SEASONED TEAK WOOD AS EXISTING (Drg No.FD-229 & 17) :- Leg size 535x40x40mm

All as per item No 3 but Arms size 610x55x25mm

All as per item No 3 but Front rail size 520x55x25mm

All as per item No 3 but Rear rail size 500x50x25mm

All as per item No 3 but Side rail size 530x70x25mm

All as per item No 3 but Top/Bottom rail Back frame size 480x55x19mm

All as per item No 3 but Side rail back frame 530x70x25mm

Removing of existing cane cleaning of cane holes and recanning with 2 mm wide new plastic cane for seat and 3.5 mm wide cane for borders of chair all as per drg and as directed by Engr-in-charge. (For chair Seat 0.51x0.45=0.2295 Sqm) (Back 0.43x0.34=0.1462 Sqm) Total 0.3757 Sqm

Polishing of chair easy with french polish to obtain glossy finish after preparation of polishing area with abbrassive cloth and as directed by Engr-in-charge.

CHAIR WRITING : REMOVING U/S COMPONENTS FROM THE EXISTING AND REPLACING THE SAME WITH SEASONED TEAK WOOD AS EXISTING (Drg No.FD-280, 16 & 20):- Front legs size 675x45x45mm

All as per item No 4 but Rear legs size 890x65x65mm

All as per item No 4 but Arms size 495x50x19mm

All as per item No 4 but Front rail size 490x65x30mm

All as per item No 4 but Rear rail size 440x65x30mm

All as per item No 4 but Side Rail size 475x65x30mm

All as per item No 4 but Stiffner size 490x25x19mm

All as per item No 4 but Teak wood back size 445x65x12mm

Removing of existing cane cleaning of cane holes and recanning with 2 mm wide new plastic cane for seat and 3.5 mm wide cane for borders of chair all as per drg and as directed by Engr-in-charge.

Polishing of chair writng with french polish to obtain glossy finish after preparation of polishing area with abbrassive cloth and as directed by Engr-in-charge.

CHAIR WOODEN BOTTOM : REMOVING U/S COMPONENTS AND REPLACING THE SAME WITH SEASONED TEAK WOOD AS EXISTING (Drg No.FD-56, 285 & 225) :- Front legs size 445x50x50mm

All as per item No 5 but, Rear legs 840x65x40mm

All as per item No 5 but Front rail size 415x25x65mm

All as per item No 5 but Rear rail size 375x25x65mm

All as per item No 5 but Side rail size 400x25x65mm

All as per item No 5 but Wooden stiffner 400x25x19mm

All as per item No 5 but Wooden back 375x50x12mm

Removing the exising Seat of chair and S&F new commercial plywood 435x435mm x 6mm thick as existing.

Polishing of chair wooden bottam with french polish to obtain glossy finish after preparation of polishing area with abbrassive cloth and as directed by Engr-in-charge.

REPAIR TO TABLE BED SIDE (Drg No. FD-210, 248 & 276) :- Removing and S&F new top of table bed side made up of 18/19 mm thick prelaminated particle board of shade bavarian beech exterior grade of size 450x350mm.

Removing of old unsv sides of table bed side and S&F new sides of table bed side made out of 18/19mm thick prelaminated particle board of shade bavarian beech exterior grade of size 450x300mm.

Removing of unserviceable ply wood back and S&F new back made out of 6mm thick commercial plywood of table bed side of required size.

Removing of unsr shelf/base of table bed side made out of 18/19mm prelaminated particle board exterior grade.

French Polishing to table bed side.

REPAIR TO TABLE CENTRE (Drg No.FD-29 (M), FD-134(M),FD-152(M),FD-235,FD-274 & FD-393) Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18/19mm thick prelaminated particle board exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teak wood.

Removing of old U/S leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item.

Removing the existing u/s long rail from Table centre and S&F new long rail made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed by Engr-in-charge

Removing the existing u/s Short Rails from Table centre and S&F new short rails, made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed

Removing the existing u/s Stiffners from Table centre and S&F new Stiffners made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed by Engr-in-charge

French Polishing to Table Center.

REPAIRS TO PEG TABLE (Drg No.FD-25(M),FD-236,FD-266,FD-277 & FD-384) - Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18/19 mm thick prelaminated particle board exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teakwood.

Removing of old U/S leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item.

Removing the existing u/s long rails from Table peg and S&F new long rails made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed by Engr-in-charge

Removing the existing u/s Short Rails from Table peg and S&F new short rail made out of Teak Wood duly finished complete to match the original as shown on Drg as directed by Engr-in-charge

Removing the existing u/s Stiffners from Table peg and S&F new Stiffners made out of Teak Wood duly finished complete to match the original as shown on Drg as directed by Engr-in-charge

French Polishing to Table peg

REPAIRS TO TEAPOY WOODEN (Drg No.FD-34(M), FD-232, FD-278, FD-382) : Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18/19mm thick prelaminated particle board exterior grade as approved by GE conforming to IS-12823 Grade-I type-II duly shade shal be Bavarian Beech screwed. Edging all round the top shall be of 4mm teakwood.

Removing of old U/S leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item.

Removing the existing u/s long rail from Teapoy wooden and S&F new long rail made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed.

Removing the existing u/s Short Rail from Teapoy wooden and S&F new short rail made out of Teak Wood duly finished complete to match the original as shown on Drg as directed.

Removing the existing u/s Stiffners from Teapoy wooden and S&F new Stiffners made out of Teak Wood duly finished & complete to match the original as shown on Drg & as directed.

French Polishing to Table peg

REPAIRS TO TABLE DRESSING LADIES (Drg No.FD-32 (M), FD-251 & FD-378) : Removing of old U/s mirror from table dressing ladies and S&F new mirror of size 1220 x 365 x 5 mm thick, duly fixed with frame as per drg.

Removing of old U/s plastic laminated sheet from the top of table and providing new plastic laminated sheet 1.00mm thick duly fixed with synthetic adhesive as per drg

Removing of old U/s glass shutters and aluminium channels and providing new sliding glass shutters duly fixed with new aluminium channels as per drg.

Removing of old U/s drawer with knobs and providing of new drawers of prelaminated particle board 18/19 mm thick for sides and 6 mm thick ply wood commercial ISI marked for bottom including chromium plated knobs as per drg.

French Polishing to Table Dressing Ladies

REPAIRS TO TABLE DRESSING GENTS (Drg No.FD-31(M), FD-230, FD-379) Taking down u/s broken mirror and S&F new mirror 760x365x5mm thick, duly fixed with frame as per drg

Removing of U/s laminated sheet from top of table and providing new plastic laminated sheet 1.00 mm thick of on top duly fixed with synthetic adhesive as per drg

Removing of old U/s drawer & knobs and providing new drawer made out of Teak Wood 12mm thick prelaminated particle board for side and 06mm thick ply wood commercial for bottom including knobs CP as per drawing

French Polishing to Table Dressing Gents

REPAIRS TO HAT STAND WITH MIRROR SMALL/LARGE (Drg No.FD-23(M),FD-206,FD-233,FD-361, FD-362) Removing of old U/S ply wood of hat stand and S&F new ply wood 3.5mm thick one side Teak Face all as directed by Engineer-in-Charge and as per drg. 4mm thick teak wood edging shall be provided ISI marked.

Removing of old U/S pegs of hat stand and S&F new metal pegs (CP) all as directed by Engineer-in-Charge and as per drg.

Removing of old u/s broken mirror of hat stand and S&F 04mm thick new mirror all as directed by Engr-in-Charge and as per drg.

Removing of old U/S ply wood from back of hat stand and S&F new ply wood 6 mm thick commercial ISI marked duly French polished all as per drg

French polishing with high class finish, including preparation by proper sand papering. All as specified & directed by Engineer-in-Charge and all as per drg.

REPAIRS TO TABLE DINING 8 PERSONS (Drg No.FD-30(M),FD-239,FD-273,FD-376) Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18mm thick prelaminated particle board as approved by GE, conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 04mm teak wood.

Removing of old U/S leg and S&F new leg made out of Teak Wood as per drg duly finished and completed to match the existing surfaces of the item.

Removing the existing u/s long rail from Table Dining 08 Pers and S&F new long rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed.

Removing the existing u/s Short Rail from Table Dining 08 Pers and S&F new short rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed.

Removing the existing u/s Stiffners fromTable Dining 08Pers and S&F new Stiffners made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed.

French Polishing to Table Dining 08 Pers

REPAIRS TO TABLE DINING 6 PERSONS (Drg No.FD-30(M),FD-239,FD-269,FD-273) : Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18/19mm thick prelaminated particle board as approved by GE conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 04mm teak wood.

Removing of old U/S leg and S&F new leg made out of Teak Wood as per drg including french polishing to repaired portion only to match the existing surfaces of the item.

Removing the existing u/s long rail from Table Dining 06 Pers and S&F new long rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed.

Removing the existing u/s Short Rail from Table Dining 06 Pers and S&F new short rail made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed.

Removing the existing u/s Stiffners fromTable Dining 06 Pers and S&F new Stiffners made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE.

French Polishing to Table Dining 06 Pers.

REPAIRS TO TABLE 900X900X760MM (Drg No.FD-88(M),FD-94(M),FD-291,FD-352) Removing of old U/S existing top from table and S&F new top of size as per drg. Top shall be 18/19mm thick prelaminated particle board as approved by GE conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 04mm teak wood.

Removing of old U/S leg and S&F new leg made out of Teak Wood as per drg duly finished and completed to match the existing surfaces of the item.

Removing the existing u/s long rail/Short Rail from Table 900X900X760mm and S&F new long rail made out of Teak Wood duly finished and completed to match the original as shown on Drg as directed by Engr-in- charge/ GE.

Removing the existing u/s Stiffners from Table 900X900X760mm and S&F new Stiffners made out of Teak Wood duly finished & complete to match the original as shown on Drg as directed by Engr-in- charge/ GE.

French Polishing to Table 900X900X760mm.

Table 4'x3' (1200x900) (Drg No.FD-273) Removing of old U/s existing top surface and S&F new top of size as per drg. Top shall be 18/19mm thick prelaminated particle board as approved by GE conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 04mm thick teak wood. All exposed faces of timber shall be treated with french polish as directed.

Removing of old u/s leg and S&F new leg made out of Teak Wood complete as shown on drg.

Removing of old u/s long rail and S&F new long rail made out of Teak Wood size & other details complete as shown on drawing.

Removing of old U/s short rail and S&F new short rail made out of Teak Wood size & other details complete as shown on drawing.

Removing the existing u/s Stiffners from Table 1200x900mm and S&F new Stiffners made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE.

French Polishing to Table 1200x900mm

REPAIRS TO TABLE 900X600X760MM (WITH AND WITHOUT DRAWER) (Drg No.FD-41(M), FD-42(M), FD-55(M), FD-223, FD-224, FD-283, FD-284) Removing of old U/S existing top from Table 900x600x760mm (With & without drawer) and S&F new top of size as per drg. Top shall be 18/19mm thick prelaminated particle board as approved by GE conforming to IS-12823 Grade-I type-II exterior grade duly screwed shade shal be Bavarian Beech. Edging all round the top shall be of 04mm teak wood.

Removing of old U/S leg from Table 900x600x760mm (With & without drawer) and S&F new leg made out of Teak Wood as per drg, duly finished & completed to match the existing surfaces of the item.

Removing the existing u/s long rail from Table 900X600X760mm (With and without drawer) and S&F new long rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE

Removing the existing u/s Short Rail from Table 900X600X760mm (With and without drawer) and S&F new long rail made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE

Removing the existing u/s Stiffners from from Table 900X600X760mm (With and without drawer) and S&F new Stiffners made out of Teak Wood duly finished & completed to match the original as shown on Drg as directed by Engr-in- charge/ GE

Removing the existing u/s Drawer from from Table 900X600X760mm (With drawer) and S&F new Drawer made out of 12 mm plywood duly fixed the S/S Knobs etc.

French Polishing to Table 900X900X760mm

Supply and Fixing 15mm Dia PVC Bush on the legs of Table with 10mm long S/S Screw (various types of wooden tables Large & small Size & Drgs) small sizes

Supply and Fixing 20mm Dia PVC Bush on the legs of Table with 15mm long S/S Screw (various types of wooden tables Large & small Size & Drgs) Large sizes

SIDE BOARD (Drg No.FD-371/241 ) Removing of existing u/s back and S&F new back of side board with 6mm thick commercial ply wood of size 1220x635mm.

Removing of existing u/s front shutters and S&F new shutters of size 390x595 mm made out of Pre laminated particle board 18mm both side teak shade all as per existing duly fixed with aluminium anodised knobs with ball spring catch.

Removing of existing u/s legs and S&F new legs of size 15x45x45mm made out of seasoned TW all as per existing.

Removing of existing u/s drawers and S&F new drawers of 12mm made out of Veneer Decorative plywood all as per existing with 6mm thick commercial plywood for bottom of drawer alongwith almn anodised knob.

Removing of U/S shelves from side board and S&F new shelves as per existing shape & size made out of 18mm thick particle board one side teak faced.

Removing of U/S side and S&F new side with prelaminated particle board 18 mm thick one side teak veneer as per existing shape & size.

Polishing of side board with french polish to obtain glossy finish after preparation of polishing area with abbrassive cloth.

TABLE WRITING (Drg No.FD-275 / FD 33(M) ) Removing the exising UNSV top of table writing and S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side with 4mm thick TW edging all round as per drg.

Removing unsv shutter and S&F new shutter to shelf of size 355x45mm x 18mm thick prelaminated particle board both side decorative teak shade with 4mm thick seasoned TW edging all round. Shutter shall be provided with one aluminium anodised knob and to be fixed with mild steel bright finish 30mm flap piano hinges.

Removing the exising UNSV legs of table and S&F new TW legs of table writing of size 140 x 45 x 45mm all as per existing.

Removing the exising UNSV stiffner of table and S&F new stiffner of bottom of size 975x50x25mm of seasoned 1st class TW as per existing.

Removing unsv drawer and S&F new drawer of table writing made with 6mm commercial plywood to bottom , 3 sides with 12mm thick wooden planks and 19mm thick prelaminated particle board exterion grade to front portion. The drawer shall be fixed with aluminium anodised knob. Rest all as per existing and as specified in drg.

Removing of U/S back ply from table writing and S&F new back ply of 6mm thick commercial plywood BWR grade as per existing shape & size.

Removing unsv bottom and S&F new bottom of table writing with 18mm prelaminated particle board exterior grade as per existing shape & size and as specified in drg.

Polishing of table writing with french polish to obtain glossy finish after preparation of polishing area with abbrassive cloth.

STOOL DRESSING CUSHIONED : REMOVING U/S COMPONENTS AND REPLACING THE SAME WITH SEASONED TEAK WOOD AS EXISTING (Drg No.FD/E6/MAP/14 ) Legs of size 380 X 55 X 40mm.

Side rail of size 260 X70 X 20mm

Front /back rail of size 390 X 70 X 20mm

Stiffner side of size 270 X 25 X 25mm

Removing unsv foam cushion of Stool dressing and S & F 32 density 450x300x75mm 'U' foam cushioned, covered with leatherite cloth on 12mm thick ply wood as existing of approved shade & quality by GE/Engr-in-charge.

Polishing of Stool dressing with Cushion with French Polish to obtain glossy finish.

BIN SOILED LINEN LARGE (Drg No.FD-212/244 ) Removing of U/S top from Bin linen large and S&F new top of size 900x450mm made out of 6mm Veneer Decorative plywood alongwith 45x19mm TW batten frame all as per drg.

Removing of U/S bottom ply from Bin linen large and S&F new bottom by 12mm thick commercial plywood of size 900x450 all as per drg.

Removing of U/S front portion from Bin linen large and S&F new front portion with 6mm thick Veneer Decorative plywood duly fixed with TW beading of size 45x45x25mm made out of TW

Removing of U/S legs ply from Bin and S&F new legs made out of well seasoned TW per existing.

Removing of U/S canning patti from Bin and S&F new caning patti to bin soiled linen small.

Removing of U/S stopper from Bin and S&F new stopper of sizes 25x25x150mm of well seasoned TW.

Removing of exsting cane, cleaning of cane holes and recaining with 2mm wide new plastic cane for side and 3.5mm wide cane for borders of bin soiled linen where canning is involved all as directed by Engr-in-charge (For bin soiled linen = 0.27x 0.24 =0.0648)

Polishing of Bin linen with french polish to obtain glossy finish after preparation of polishing area with abbrassive cloth.

M & L for polshing of following wooden furniture with french polish including preparation of old wooden surfaces and applying french polish to obtain glossy finish complete all as specified and as directed by Engr-in-Charge : Book case FD/NP (Drg No.DB-3957, FD-45, FD-237)

Book case GD (Drg No.TP)

Book shelve open small (Drg No.DB-4071)

Book shelve open large (Drg No.DB-4121)

Book case open small (Drg No.DB-4121)

Chair Draftsman (Drg No.FD-03, FD-204)

Chair easy with cushion (Drg No.FD-358)

Chair Dining long back (Drg No.FD-357)

Desk school type A (Drg No.F-20)

Display Board Notice 4ʹx4ʹ (Drg No.FD-99(M))

Display Board Notice 6ʹx4ʹ (Drg No.FD-99(M))

Display Board 1820x 1220 mm (Drg No.CWE/KKE/99/SFD-31)

Locker bed side (Drg No.DB-4174, FD-54, FD-222)

Mirror with shelve (Drg No.FD-52(M))

Mirror large 4ʹx2ʹ (Drg No.FD-52(M), TP)

Rack side 3 spaces (Drg No.DB-4123)

Rack boot (Drg No.F-12)

Rack without drawer (Drg No.F-35)

Rack wooden 5ʹx3ʹx2ʹ 1ʺ (Drg No.F-12)

Stool 2ʹ height (Drg No.F-2)

Stool of sort 2ʹ to 2ʹ 10ʺ (Drg No.DB-2365)

Table 2ʹx2ʹ (Drg No.DB-4085, FD-95, FD293)

Table 5ʹx 2ʹ 10ʺ (Drg No.DB-2648)

Table 6ʹ x 3ʹ 6ʺ (Drg No.TP)

Table office clerk (Drg No.DB-4120)

Table office officer (Drg No.DB-4119)

Table Draftsman (Drg No.DB-4117)

Table card (Drg No.FD-91, FD-352)

MS PUSHKARAJ AND CO

Mahesh Traders

KASTURILAL HARICHAND OHRI AND SONS

M/s Green Leaf Electricals