Certain repair to boundary wall and fencing of installation buildings under the AOR of AGE(U) W/S-lll and AGE(U) E/S-lll under AGE (I) (U) B/R, Delhi Cantt-10.

Amount

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement including water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer (chalk whiting ) complete all as specified and as directed.

Dismantling of brick masonry work built in Cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class except "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish

M & L for washed stone grit plaster on exterior walls in two layers,under layer 12mm cement plaster 1:4 (1 cement :4 coarse sand) furrowing the under layer with scratching tool,applying cement slurry on the under layer @ 3 Kg of cement per square metre,top layer 15mm cement plaster using white cement in the top layer of the item of washed Marbal stone chipping grit plaster 1:1/2:2(1 White Cement:1/2 coarse sand:2 Marbal stone chipping 10mm nominal size) including pigment(colour) to be added as per approved by Engr-in-Charge in panels with groove all around as per approved pattern including scrubbing and washing,the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engr-in Charge (Payment for providing grooves shall be made separately).

M & L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removalof wooden battens,repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Charge.

M & L for framed work such as gate(any size), grills,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars barred iron doors ladders framed balusters,walk ways,railing,framework of water tank and similar work con-forming to Fe.290.Gde-E-165.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition (reinforced) cement concrete of any description and in any position complete all as specified and as directed.

Excavation in trenches , not exc 1.5 m wide and n exc 1.50 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates), as in foundation filling and mass concrete complete all as specified and as directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips.

___ Ditto___ as per item No. 15 above but 6 to 8 mm dia as in stirrups

M&L for Formwork to sides of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work complete all as specified and directed

M&L for Formwork to sides of pillars, posts, struts, piers, columns and sanchions complete all as specified and directed

M&L for RCC (nominal mix) concrete type B1 1:2:4, using 20 mm graded stone aggregate as in foundation including rafts footings , foundations beams, plinth beams, bases for columns etc basement slab, undereamed piles and mass concerte all as specified and directed

M&L for Reinforced cement concrete (nominal mix) of 1:2:4 type B-1 (20mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Returning , filling in incl spreading levelling and well ramming and watering in layers n exc 25 cm complete all as specified and directed

M&L for removing excavated material n.exc 50 m and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed.

M&L for 20 mm thick granite ( of any type ) work (table rounded and polished) in colomn, jambs, brick pillars, over 15mm thick rendering in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixer of pigment to match with shade of granite complete all as specified and directed.

Dismantling posts or struts (steel or RCC) any section, embedded in cement concrete including taking out embedded portion of posts or struts and making good disturbed ground complete all as specified and directed

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/loose soil, each n.exc 0.50 cum, getting out and removing surplus soil to a distance n.exc 50 m and making good surfaces complete all as specified and directed.

M&L Cement concrete 1:3:6 (40 mm graded stone aggregate) in foundation filling and mass concrete etc including necessary formwork as ordered complete all as specified and directed.

M&L for mild steel works such as post and struts in fencing including cutting tops to shape as direted, drilling holes, notching for wire etc, including all necessary drilling bolting or riverting etc and similar work, conforming to Fe-290,Gde-E-165, complete all as specified and directed

M&L mild steel round bars 10mm dia (Fe-410-W Gde E-250) quality- A or Fe 290 (gde E-165) and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling fencing wire mesh of any descripition, complete all as specified and directed.

Supply only chain link fencing 100x100mm mesh with 4.00mm dia Mild steel galvanised wire, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standerds, rails, straining bolts etc including provision of mild steel binding wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

S&F galavanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia at barbs 75mm spacing and strainings and fixed to any type of standard rails staning bolts including securing or tying at crossing with provision of GI mid steel wire, staples or steel pins etc, (each line wire to be measured) including dismatling old barbed wire of any type and any size, complete all as specified and as directed.

M & L mild steel screw bolts (machine made) 5.00mm to 10.00mm diameter of neck and length of bolt exc 5.0 cm and n.exc 10cm with hexagonal or square heads at one end and screwed the other end, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified.

S&F in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length , spring core wire ( 2.5mm thick) of high tensile strength of 165 Kg/Sqm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with existing Y shape Angle iron with 6 horizontal R.B.T ( Reinforced Barbed Tape) wire, stud tied with GI Staple sand GI clips to retain horizontal all complete as per direction of Engineer-in-Charge

M&L PCC (1:2:4) type B-1 (20mm graded aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed

M&L applying two coat of synthetic enamel paint on new steel surfaces of any description not exc 10 cm width or girth including preparation of surfaces, complete all as specified and directed.

Sanjay Associates

Mudit Interior and Developer

SURESH KUMAR SHARMA & CO

UNIQUE BUILDERS

M/S GR construction compony

Prabhu Infrastructure And Developers

RIZCON

HANUMAN BUILDERS

B. S BUILDERS