SPECIAL REPAIRS TO SNCO S MESS BILLETS NO P 499 AT WEST AREA AF STN JALAHALLI

Amount

B/R WORKS :- Taking down chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description (Steel/wooden) each complete all as specified and directed.

All as per item 1 above but exceeding 1.5 sqm but not exceeding 4 sqm each.

M & L for taking down shutters of any description exc 1sqm and n exc 2 sqm each complete all as specified and directed.

M&L for taking down chowkats or frames any description .exc 1.5 Sqm nexc 4 sqm each all as specified and directed.

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm,& refixing in the same opening all as specified and directed.

S&F for cutting out old hinges from steel frame by welding or other means and replace with & including 100mm long MS butt hinges complete all as specified and directed.

M & L for Dismantling of MS work as in of any description

M & L for Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle with strike plate, telescopic peg stay, locking bracket complete with glazing bars for glazed shutter all as specified.

All as per item No 9 above but without glazing bars .

S&F steel ventilators with centre hung shutter including two pairs of brass cup pivots catch spring and pulley wheel with glazing bars for glazed shutter all as specified and directed.

All as per item No 11 above but for gauged shutter

S&F for 4.00mm thick sheet glass and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane

S&F for 4.00mm thick figured Pin headed glass and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet one side reinforced with M.S. Square tube, another side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made 28 to 30mm thick factory made EPS Core Solid PVC Moulded Door Shutter consisting of frame made out of M.S.Tube. The core panel shall consist of 25mm thick High Density EPS conforming to IS 4671, routed with design, sandwiched in between 2mm thick Moulded prelam PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face. the door on all the edges to be sealed with lipping of 10mm (5mm x2) thick x 25mm wide PVC sheet for three sides & 60mm wide PVC sheet for lock side. The lipping shall be bonded to the 2mm Moulded / Plain PVC sheet with solvent cement. including neccessary fitiings etc complete as specified and directed.

S & F for Pressed steel frames for doors of size 165 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,(Butt hinges measured and paid separately)

S & F for cement concrete 1:3:6 type C-0 using 12.50mm graded stone aggregate to fill the back of chowkats complete all as specified and directed

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 including necessary weldding where ever required all as specified and directed.

S&F 2nd class hard wood 30mm thick paneeled shutters (any no of panels)with panels of timber flat on both sides (feather edged or veneered particle board medium density , wood particle board with commercial face veneers all as specified and directed.

S&F for 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

All as per item No 22 above but fixed in repairs.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section complete all as specified and directed.

All as per item No 24 above but fixed in repairs.

Supply and fix for aluminium handles, cast type, anodized 150mm complete all as specified and directed.

All as per item No 26 above but fixed in repairs.

M & L for Cutting openings through masonry walls built in cement mortar walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing,fixing and removing, shoring,cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified and directed.

M & L Preparing new wooden surface and applying two of Synthetic enamel Paint over a coat of pink primer all as specified and directed.

M & L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over a coat of red oxide primer complete all as specified and directed.

M&L for Forming jambs, etc., to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, built in cement mortar 1:4 including facing and pointing (if necessary) to match existing work, complete all as specified and directed.

M&L for Making good under cills (or over arches, lintels and bressummers) including all pinning as necessary in cement mortor 1:4 complete all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed.

All as per item No 33 above but in repairs.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

All as per item No 35 above but in repairs including of removing old beading and providing 1st class hard wood beading fixed and painting all as specified.

S& F for aluminium powder coated corrugated drapery rod 25mm dia complete all as specified and directed

S & F for fancy type Aluminium anodised powder coated draphery rod brackets suitable for 25 mm dia pipes fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling, plugging & finished with polishing complete all as specified and directed.

S&F in repairs mild steel 300mm , ordinary rat rail rod pattern springs including roller and roller plate complete including cutting of existing rat rail and weldding of the new one in position all as specified and directed.

Demolition of cement concrete (un reinforced)of any description and in any position not other wise specifically provided for

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded agg) as in plinth protection finished even and smooth w/o using extra cement complete all as specified and directed.

M & L forming contraction (Dummy) joints 30mm deep x 10mm wide filled with sealing compound Grade 'A' all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm grded stone aggregate as in sub base flooring complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:4 for floor floor finishes complete all as specified and directed.

M&L for 15mm thick rendering on stone masonry in cement mortar 1:4 surface is to be finished even and fair without using exra cement and prepare to receive tile finishes complete all as specified and directed.

M & L for Joint free non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile complete all as directed and specified.

M & L for Joint free Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exceeding 0.18 Sqm and not exceeding 0.38 Sqm as in flooring / skirting complete all as directed and specified.

M & L for Glazed coloued Ceramic tiles of size 300 X 200 X 7mm or 450 X 300 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado all as specified and directed.

M&L for Sadharahli granite slab flooring 19-20mm thick with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed

M&L for Sadharahli granite tiles as in riser and dado of steps over 10 mm thick CM 1:4 all as specified and directed.

M & L for Chequered cement concrete tiles with gray cement and pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors all as specified and directed.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M & L for Rounding to edges of granite slab all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landings, chajjas, and similar suspended work , water tank etc all as specified and directed.

Demolition of brick/concrete walls built in cement mortar and removing the rubbish off the premises all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M& L for 10mm thick plastering in cement mortar 1:4 rendering mixed with water proofing compound is to be finished even and fair without using extra cement complete all as specified and directed.

M&L Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. and applying a coat of blown bitumen @ 1.20Kg/sqm hot bitumen 90/15 over and below the membrane complete all as specified and directed.

M&L for 15mm thick rendering on stone masonry in cement mortar 1:6 surface is to be finished even and smooth without using exra cement complete all as specified and directed.

M&L for 5 mm thick rendering on concrete surfaces as in ceiling in cement mortar 1:4 surface is to be finished even and smooth without using exra cement complete all as specified and directed.

M&L for 15mm thick rendering on stone masonry in cement mortar 1:4 surface is to be finished even and smooth without using exra cement

M & L for Use and waste of Form work to rough finished flat concrete surfaces of suspended slab such as roof slab, floor slab similar work not exceeding 200 mm thick(Horizontal or sloping) all as specified.

M&L for RCC Type B1 1:2:4 (20 mm graded stone aggregate) as in slabs supported on walls beams and columns in floors roofs landings balconies canopies deck slabs and in shelves and the like all as specified and directed.

M&L TMT bars 10mm dia and over cut to length, bent to shape required, including spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L RCC 1:2:4 type B1 (20mm graded aggregate) as in fins, fascia, parapets all as specified and directed.

M&L RCC 1:2:4 type B1 (20mm graded aggregate) as in Chajjas all as specified and directed.

M&L for use and waste of form work to fins, louvers, fascia with rough finished flat concrete surfaces all as specified and directed.

M&L for use and waste of form work to chajjas and smimilar items including edges with rough finished flat concrete surfaces.

M & L for Pre-cast cement concrete block masonry type C1, 1:3:6 (using 20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar,complete built in CM 1:4 complete all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying 2 mm avarage thick Birla care wall putty, one coat of primer and two coat of oil bound distemper all as specified and directed.

M&L preparation of newly plastered surfaces of ceilings and applying two coat of White wash all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coat of Cement based Paint over a coat of primer all as specified and directed.

M&L for Complete removal of existing treated surface finishes and applying 2 mm avarage thick Birla care wall putty including filling up of all nail holes,one coat of primer and applying two coat of OBD all as specified and directed

M&L preparation of old wall surface and applying two coat of White wash all as specified and directed.

M&L preparation of old ceiling surfaces and applying two coats of White wash all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces,and applying two coat of Cement based Paint over one coat of primer all as specified and directed

M & L for Preparing old painted wooden surface and applying one coat of Synthetic enamel Painting all as specified and directed.

Removing existing unserviceable tar felt on any type any description from roof slab alongwith screed bed , cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m from the starting point all as specified & directed.

M&L rendering 15mm (average) thick in CM (1:4) on concrete surface, finished even and smooth without using extra cement, mixed with water waterproofing compound all as per manufacturers instructions and as directed by Engr-in-charge (Note :WPC shall be paid & measured separately)

Supply only approved liquid water proofing compound, Make : conplast x 421 IC, of M/s Foroc Chemical (Inida) Ltd or equivalent

M&L Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. and applying a coat of blown bitumen @ 1.20Kg/sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bitiminous Aluminium paint / Primer @c ).10 Kg/Sqm complete all as specified and directed

Dismantling of PVC / any type of drain pipes 100mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed

Dismantling of PVC/ any type of drain pipes 75mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed

S&F PVC(SWR) Pipe 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors/ wall all as specified and directed

S&F PVC(SWR) Pipe 75mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors/wall all as specified and directed.

S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100 mm dia complete all as specified and directed

S & F PVC (SWR) bends 110 mm dia in any radius with access door etc.

S & F PVC (SWR) bends 75 mm dia in any radius with access door etc.

S & F 110mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal with access door inlcuding jointing with rubber washer and clamps etc.

S & F 75mm dia PVC (SWR) branch piece single (single 'Y') equal or unequal with access door inlcuding jointing with rubber washer and solvent clamps etc.

S & F 110mm dia PVC (SWR) branch piece double (double 'Y') equal or unequal with access door inlcuding jointing with rubber washer and solvent clamps etc.

S & F 75mm dia PVC (SWR) branch piece double (double 'Y') equal or unequal with access door inlcuding jointing with rubber washer and solvent clamps etc.

S & F 110mm dia PVC (SWR) junction single (single T') equal or unequal with access door inlcuding jointing with rubber washer and solvent clamps etc. complete all as specified and directed.

S & F 75mm dia PVC (SWR) junction single (single T') equal or unequal with access door inlcuding jointing with rubber washer and solvent clamps etc. complete all as specified and directed.

S&F PVC SWR vent cowl 110mm dia complete all as specified and directed.

S&F PVC SWR vent cowl 75mm dia complete all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

Taking up or down 20mm steel tubing and connections all as specified and directed.

Taking up or down 25mm & 32 mm steel tubing and connections all as specified and directed.

Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 32mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F for Female Brass Threaded Adaptor for 16mm dia pipe (FTA/ FBTA) complete all as specified.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth in stone concrete block or slab walls complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S/F plastic seat cover for pedastal water closets, solid, with flat bottom and cover and MS chormium plated/ PVC hinging type device all as specified and directed.

Supply and Fixing in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.

Supply and Fixing of in repairs vitreous china wash basin, white counter top basin, Oval shaped of size 400 X 525 X 195 mm fitting into counter top including brackets all as specified and as directed .

S & F for 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 40 gms) suitable for wash hand basins complete all as specified and directed.

S & F for Vitreous China urinals, half stall(back wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S & F for 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 40 gms) suitable for urinals

S & F for Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S & F in repair Pillar taps fancy type of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms) complete all as specified.

S&F in repair two way Bib taps of any color of PTMT two way with double control knobs 15 mm with fancy type with capstan head handle fixed to iron pipe or for union complete all as specified.

S & F in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified

S&F in repair PTMT, Fancy type wall Mixer fixed to iron pipe 15mm complete all as specified.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

S& F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed

S & F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and as directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed

S & F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, (Minimum weight 300 gms) as specified and as directed.

S & F Towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats,(Minimum weight 90 gms) as specified and as directed.

S&F PTMT Soap dish fix to wall all as directed and specified.

S&F for PTMP health faucet with 1.00m lomg PVC flexible pipe and wall hook complete all as specified and directed.

M & L for 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F Ball valves 25 mm high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F UPVC spout pipe 40mm dia 60cm long as all specified and directed.

S & F for MS work as in Framed work such as in railings with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, railings and similar work conforming to Fe.290.Gde-E-165

M/L for Provision of mild steel railing as in stair case and balcony all as specified and directed.of Fe 290 Gde E-165.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble including raking out joints/pointing of cement or cement lime mortar all as specified and directed.

Grubbing up plants/vegetation digging out roots , filling of holes of any description upto double storey constr from roof and walls and making good the decayed portion with cm 1:3 mixed WPC including coving using the form work if any finally finished the surface with 15mm cm 1:3 complete all as directed.

E & M: - Taking down copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, pendents, regulators, sockets, light fittings, wooden boards, bell push, call bell, regulators etc (credit scheduled for above items should be made as per condition separately) and making good to disturbed wall and surface complete all as specified.

M&L for Point wiring using approved colour coding as per IS ( Red, black and green for single phase circuit ), with 1.5 Sq mm cross sectional area, single core, multi stranded copper conductor (FRLS) PVC insulated and unsheathed electrical cable ISI Marked and including medium grade PVC conduit of dia not less than 20 mm and conduit accessories concealed in wall/surface including mild steel/pressed steel sunkun boxes (with earth dolly) dully painted with two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socktes etc including PVC insulated multi-stranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr in Charge at site for the following:- Note - (i) Cost of cutting chassing and making good of disturbed surface all to match with existing surface deemed to quoted rates. (ii) Switch ,socket and regulator to be measured and paid separately in respective items.

(a) Light point controlled by one piano type 5 amp switch complete all as specified

(b) One Fan (Ceiling/Exhaust/Wall) point controlled by one piano type 5 amp switch and fan regulator complete all as specified

(c) One 3 pin socket outlet, 5 Amps independent board complete all as specified & as directed. (Switch, socket shall be measured separately).

(d) One socket outlet 3 pin 5 Amps on the same board controlled by separate switch. (Switch, socket shall be measured separately).

(e) One light point controlled by two 2 way switches all as specified

All as per item No .2 here-in-before but with 2.50 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 2.50 Sq mm size (Switch, Socket shall be measured and paid separately).

M & L for switch piano flush type 5/6 Amps 240 volts single pole one way complete all as specified & as directed.

M & L for switch piano flush type 5/6 Amps 240 volts single pole two way complete all as specified & as directed.

M&L for socket outlet 2 in 1 , 5 pin, 5/6 Amps 240 volts complete all as specified & as directed.

M&L for switch piano flush type 15/16 Amps, 240 volts one way complete all as specified & as directed.

M&L for Socket flush type 15/16 Amps, 2 in 1, 240 volts complete all as specified & as directed.

M&L for ceiling rose surface bakelite, 3 terminal complete all as specified & as directed.

Taking down old unserviceable main switch/DBs/MCB DBs with MCB including making good the disturbed surface complete.

M&L for sheet metal enclosure MCB DB, SPN, 240 volts, 8 way, double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete.Make : Legrand/ Schneider/Indo Asian (Optipro)

M & L for VTPN distribution board, 415 volts , 50 Hz, 04 way with 200 Amps rated bus bar, vertical double door type, IP 43 suitable for 160 Amps 4 pole MCCB as incoming and MCB SP as outgoings, fixed flush in wall and making good all disturbed surfaces in all respects and complete all as specified and directed. Make : Legrand/ Schneider/Indo Asian (Optipro)

M & L for VTPN distribution board, 415 volts , 50 Hz, 04 way with 200 Amps rated bus bar, vertical double door type,IP 43 suitable for 63 Amps 4 pole MCCB as incoming and MCB SP as outgoings, fixed flush in wall and making good all disturbed surfaces in all respects and complete all as specified and directed. Make : Legrand/ Schneider/Indo Asian (Optipro)

Supply and fixing MCB SPN, 240 volts AC 50 Hz, 32 Amps all as directed. Make : Legrand/ Schneider/Indo Asian (Optipro)

Supply and fixing MCB TP, 415 volts AC 50 Hz, 63 Amps all as directed. Make : Legrand/ Schneider/Indo Asian (Optipro)

S&F MCB SP 240 volts, 10 KA, C-Series 6 to 32 Amps complete all as specified & as directed. Make : Legrand/ Schneider/Indo Asian (Optipro)

S&F MCCB 160 Amp 25 KA four pole 415 Volts, 50 Hz with thermal magnetic release, fixed type complete all as specified & as directed. Make : Legrand/ Schneider/Indo Asian (Optipro)

S&F MCCB 63 Amp 16KA three pole 415 Volts, 50 Hz with thermal magnetic release, fixed type complete all as specified & as directed.Make : Legrand/ Schneider/Indo Asian (Optipro)

Taking down sub main wiring including batten /Conduit complete all as specified.

M&L for surface / concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated,one run of unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green

M&L for surface / concealed sub main wiring with 4 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 10 sq mm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 32 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, including two runs of unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red/Yellow/Blue, Neutral-Black and Earth-Green

Supply and fix and repair LED street light along with fixture 18 W IP 65 complete all as specified and as directed by Engr-in-charge Make -Phillips/Wipro/Havells

Supply and fix LED down lighter surface mounted slim square 15 watt ultra sleek general purpose with low height CRCA house and soft diffuser lighting - hieght 32 mm and color tempreture 6000k complete all as specified and as directed Make -Phillips/CG/Havells/Wipro

Supply and fixing the LED Tube light batten/channel along with LED lamp 18 watt with high frequency power factor 0.90 wall with all accessories internally prewired and including connecting up with twin core copper conductor cable from ceiling rose to connector block all as specified Make -Phillips/Wipro/Havells

Taking down of existing ceiling fan from any height, opening and dismantling for greasing and painting of fans complete with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust writing MES No with black paint etc and hanging of fans at same location including clamp with nut/bolt and rubber bush of any make connecting up including provision of cable from ceiling rose to fan complete all as specified and directed by Engr/in/charge.

Taking down of existing Exhaust Fan from any height, opening and dismantling for greacing and painting of fans complete with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust, writing MES No with black paint etc and refixing of fans at same location including connecting up including provision of cable from ceiling rose to fan complete all as specified and directed by Engr/in/charge.

S&F step type fan regulator electronic type ( flush type ) 240 volts and electrical connections complete all as specified & as directed.

M&L for providing earthing complete with GI earth plate electrode of size 60 cm X 60 cm X 6 mm thick burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 4 mm dia GI wire by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.5 of SSR Pt-I, connected to earthing main switch board/main board including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (light grade) for watering and 15 mm bore GI pipe (light grade) for protection of earth lead etc. complete all as specified and directed.

Taking down Unserviceable cable any size from trench and making good for the same all as specfied and directed.

Supply and lay cable XLPE insulated , screened, PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty 1100 Volts grade with stranded aluminium conductor of size 70 Sq mm 3.5 core complete all as specified and directed.NOTE- Cable connection and testing should be done by contractor and including in rates.

Excavation in trenches in any type of soil not exc 1.5m wide & not exc 1.5 deep and getting out for laying of cable all as specified

Supply and filling dry river sand in trenches including spreading for cushioning the LT cable and punning down complete all as specified and directed by Engr in charge Note:- Punned down thickness 18 CM shall be measured and paid.

Supply and laying of reinforceed precast concrete cable cover,class HVP type 1 with peak size 300mm x 180mm x40 mm with length to the width of the trench complete all as specfied and directed.

Returning filling trenches with excavated earth including spreading leveling watering and well ramming in layer not exc 25 cm all as specified and directed by Engr in charge

Removing excavated material n.exc 50 m and depositing where directed of a level n exc 1.5 m above the starting point.

Material and labour for cutting of bituminous road/ hard standing/hard rock/wall up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of protection pipe for cable including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1, 40 mm grade crushed stone aggregate and block top with black bituminous upto existing surface level or removing the inter locking tiles carefully and refixing properly as per existing surface including suitable size of GI pipe (if necessary) complete all as specified and as directed by Engineer-in-charge. Note: 1. If damaged/broken the any type of tiles while removing, the contractor shall replace the broken tiles with new one. 2. The Quoted rate is included for all materials/T&P/Machinery used in this item, no material can paid/measured separately. 3. All the removable tiles/re fixable material shall kept carefully at a safe place for refixing with in this quoted rate. 4. GI Pipe shall be measured and paid separately under relevant item.

M&L in repairs for light grade GI tubing of size 50 MM dia fixed to pole / wall with MS clamp or laid in floor/hard standing etc complete all as specfied and as directed.

Supply and fix in repair MCCB tripple pole & Nuetral 415 Volts 200 Amps 36 KA rupturning capacity ,C series complete all as specified and directed.

Moulya Builders

shashi shekar construction

SREE BUILDERS

Maruthi constructions

G K CONSTRUCTIONS

chowdeshwariconstructionco

LAKSHMI CONSTRUCTIONS

ARATHEERTHA CONCEPTS

Thirumala Construction

K. VENKATESH NAIDU