Head Regulator of water supply channel at Daudhar

Amount

Filling stones into crates and hand packing including supplying and carrying stones from quarry complete in all respect

Weaving wire netting for wire crates including binding sides and partitions to make crates of 6"x6" mesh

Reinforced Cement Concrete M-20 with Batching Plant, Transit Mixer and Concrete Pump in Open Foundation complete as per Drawing and Technical Specifications

Reinforced Cement Concrete M-20 with Batching Plant, Transit Mixer and Concrete Pump in sub-structure complete as per Drawing and Technical Specifications (height upto 5m)

Furnishing and Placing Reinforced cement concrete RCC Grade M20 using Batching Plant, Transit Mixer and Concrete Pump as per drawing and Technical Specifications for Solid slab super structure including centering and shuttering (height upto 5m)

Reinforced Cement Concrete M-25 with Batching Plant, Transit Mixer and Concrete Pump in Open Foundation complete as per Drawing and Technical Specifications

Reinforced Cement Concrete M-25 with Batching Plant, Transit Mixer and Concrete Pump in sub-structure complete as per Drawing and Technical Specifications (height upto 5m)

Furnishing and Placing Reinforced cement concrete RCC Grade M25 using Batching Plant, Transit Mixer and Concrete Pump as per drawing and Technical Specifications for Solid slab super structure including centering and shuttering (height upto 5m)

Plain cement concrete M-10 (1:3:6) nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.

Plain cement concrete M-15 in Sub Structure complete as per Drawing and Technical Specifications.

Cement Concrete Lining 75 mm thick or less laid manually for irrigation channels, using cement concrete M-15 mixed in an automatic computerised batching and mixing plant and transported to the site in transit mixers complete in all respect.

Putting cement water slurry 1:3 with cement @2.25kg/sqm on prepared bed and side slopes before laying concrete on bed and side slopes.

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation.

Dressing side slopes and preperation of subgrade for lining.

Earthwork for lip cutting for lining of irrigation channnels inclusive of all alowances, lead and dressing (upto 1.5 m depth).

Earthwork for lip cutting for lining of irrigation channnels inclusive of all alowances, lead and dressing (1.5 m to 3.0 m depth).

Extra for laying earth, watering and rolling in 20cm layers as per specifications for compaction.

Earthwork in excavation of soil in foundation of structures by mechanical means for depth above 3m & upto 6m as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of slumps and other deliterious matter, dressing of sides and bottom and backfilling with approved material.

Cold twisted deformed (Ribbed/Tor Steel Bar) Bars Fe500 grade as per IS 1786-1985, for R.C.C. works, where not including in the complete rate of R.C.C. including bending and placing in position complete in all respect.

Back filling with Sandy material behind abutment, wing wall and return wall complete as per drawing and Technical Specifications.

Dressing of earthwork

Making temporary sirki sarkanda godown 3m x 3m with walls 2.5 m high 1.5 brick thick burnt brick (excluding cost of bricks) but including cost of other materials

Filling expansion joint with sealing compound complete in all respect. [75mm deep]

Applying bitumen primer coat on side of lining and top of sleepers for construction joints, contraction joints and expansion joints complete in all respect.

Providing and fixing 150mm wide PVC water stop seal at the centre of slab at construction joints complete in all respect.

Filling construction/contraction joint with sealing compound complete in all respect.

Providing and laying 250mm wide LDPE film of 150 micron over sleepers

Making bore and installation of pumping set for dewatering arrangements complete in all respect.

Providing Running and maintenance of pumping set 8HP generator set for dewatering arrangements complete in all respects

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Steel casting as per I.S. specification & grade complete in all repects and to entire satisfaction of engineer-in-charge.

Providing & Fixing J -anchor dia 16mm complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing U -anchor dia 16mm complete in all respect and to entire satisfaction of engineer in-charge.

Providing chequred plate 8mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing wheel assembly 150x40 complete in all respect and to entire satisfaction of engineer in-charge.

Providing rod dia 25mm complete in all respect and to entire satisfaction of engineer in-charge.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Providing hollow bulb seal (J- Seal) and fixing in position including preparation of suface complete in all respects and to entire satisfaction of Engineer-in-charge (100/44).

Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 80x12mm.

Providing and Fixing Galvanized Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Oiling and greasing of gates

Providing 7 watt LED 40 watt Solar Pannel Battery 12V-40Ah with T-Gel Battery.

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Painting two coats with anticorrosive bitumastic Paint to give an even shade with special quality paint.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide.

Providing and Fixing 1.5 qtl capacity spindle hoist assembly complete in all respects and to entire satisfaction of Engineer-in-charge size 80x12mm.

Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

Any other item

GURINDER PAL SINGH CONTRACTORS