Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bid. | |
| 2 | L2₹34.3 L+₹33,956.50 (1.00%)Rejected-Finance H NO B III 95 MOHALLA GHARTHOLI MISSION ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹34.6 L+₹68,620 (2.02%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bid. | |
| 4 | L4₹34.8 L+₹87,919 (2.59%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bid. |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (South) Mamun
GE (South) Mamun, Mil Stn mamun, Pathankot
As Specified in BOQ and Tender Documents
2024_MES_663312_1
GE(S)/M-24/2024-25
Open Tender
Civil Works
Item Rate
270 days
Mamun Pathankot
As per NIT
10 documents required · 10 mandatory
₹500
GE (South) Mamun
₹80,000
Yes
GE (South) Mamun
14 Nov 2024
2 Jul 2024
12 Sept 2024
2 Jul 2024
4 Sept 2024
16 Jul 2024
2 Jul 2024 - 8 Jul 2024
9 Jul 2024
Amount
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facing, dressed stone work and precast concrete articles, including removal of debris from site & deposited where directed complete all as specified and directed.
Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debris from site & deposited where directed complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position including removal of debries from site and deposited where directed complete all as specified and directed. Note: Reinforcement shall be cut as required to facilitate demolition.
M&L for roughening surface of old concrete by picking, sweeping clean and washing down with water to remove all loose dust etc.and applying brushing neat cement slurry with 3.00 kg of cement per sqm, complete all as specified and directed.
Taking down cement plaster / wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.
Taking down shutters of any description area exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.
Taking down, easing and adjusting shutters of any description, exceeding 1.00 Sqm but not exc 2.0 Sqm each and refixing in the same/other opening, complete all as specified and directed.
M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specifiedand directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 65 x 125 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately) Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 50 x 100 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately) Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
M&L for PCC 1:3:6, nominal mix type C-0 (using 12.5mm graded crushed stone aggregate) as in filling hollow of pressed steel door frames/chowkats complete all as specified and directed.
S&F 35 mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.; sizes of me-mbers of shutters as specified fitted to chowkats including preparation of surfaces of shutters and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed.
S&F factory made 35mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F window made of pre painted steel (base steel as per IS 513 of 0.56mm thick D quality galvanized as per IS 277 with zinc of 120 GSM), primer coted with epoxy primer of 5-7 micron thick, finish pinted with a polyester paint of 12-16 micron thck and back coated with 5-7 micron thick alkyd backer.Section for outer frame should be of 72x55mm, centre mulion should be of 72x 50mm, section for fixed glass beading should be of 12x12mm and secion for shutter should be of 48x25mm, Outer frame and mullion section to have rebte for glazed shutter, fly mesh and 20mm provision for guard bar/grill fly mesh shutter section should be of 20x40mm .The section are to be cut to length mitre joined with corner bracket,centre mullion to be fixed with mulion cap,Elixir or equivalent stay,handle 2 nos of heavy duty stainless steel pivot hinge shall be provided per shutter.The window should be panelled with 4mm thick plain float glass and SS mesh for Fly mesh shutter 304 grade, Rubber gaskets areprovided all around the glass.The above frame should be fixed to the concrete/masonary wall by means of selfexpandind screws including 10mm square guard bars with 152.4 mm pitch, for finished item of work complete all as specified and directed.
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately) Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 35mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately)
S&F hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F factory made 18mm (+0.7mm) thick WPC cupboard shutter, prelaminated one side with coating of ultra voilet chemical, glossy/mat finish incl. 100% termite/water proof, fire retardant, Eco friendly, density not less than 600Kg/cum finish at all edges for making edges lipping/bending, complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish width of flaps (when open) 30 mm complete all as specified and directed.
S&F Stainless steel fasteners of size 75mm long steel supports, fixed to walls, complete all as specified & directed.
S&F Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specified & directed.
S & F 100 mm long stainless steel Butt hinges, medium weight and fixed complete all as specified and directed.
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 125 mm long aluminium handle cast type anodised complete all as specified and directed.
S&F 140 mm long floor door stopper, cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed
S&F 300 mm size mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
S&F GI wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed.
S&F in repairs GI wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/aluminium beads complete all as specified and directed.
Hacking out old broken glass (any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed.
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 3mm thick Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed with oil putty complete all as specified and directed.
S&F in repairs 20mm bore stainless steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.
Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 20 cm girth in brick walls, complete all as specified and directed.
S&F steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.
Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.
S&F steel water tubing 20mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and directed.
Refixing old steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc.) and taking up or down complete all as specified and directed.
S&F GI tubing 32 mm bore light grade in short length as spout pipe laid in sunken floor slab in slope to brick wall with PCC 1: 2:4 type B -1 complete all as specified and directed.
S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old broken water tank complete all as specified and as directed.
S&F Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old brocken water tank complete all as specified and as directed.
S&F Stop valve/Angle valve (ISI Marked), fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and directed.
S&F Stop valve (ISI Marked) fancy type, chromium plated cast copper alloy with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed complete all as specified and directed.
S&F bib tap 15 mm bore long body, Brass CP, fancy type (long shank), with crutch or butterfly handle screwed down, screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F in repairs Stop valve (ISI Marked) fancy type, chromium plated cast copper alloy with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed complete all as specified and directed.
S&F in repairs 15mm bore pillar tap cast copper alloy with capstan head, chromium plated fancy type screwed down high pressure with or without lettered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe or check nuts 15mm bore complete all as specified and directed
S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC, black/ white colour complete all as specified and directed .
S&F Shower rose swivel type brass chromium plated 200x200 mm size with CP brass long arm 450-550mm long including fixing to steel pipe or unions complete all as specified and as directed.
S&F brass chromium plated soap dish with and including CP screws complete all as specified and as directed.
S&F in repairs Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.
S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed.
S&F health foucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube fixed to angular stop cock and complete wall hanging arrangement, complete all as specified and directed.
S&F in repairs CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. complete all as specified and directed.
S&F in repairs Centre hole basin mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed, complete all as specified and as directed.
S&F in repairs Sink mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed, complete all as specified and as directed.
S&F in repairs wall mixer without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed, complete all as specified and as directed.
S&F in repairs Push botton type dual flush type PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres, complete all as specified and as directed.
S&F in repairs sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x 460 mm and bowl size 400mm x 300mm x 180mm complete all as specified and directed.
S&F in repairs Vitreous china wash basin, oval shape counter top, white, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but including vitreous china pedestal and PVC waste pipe with union, flexible suitable for wash hand basin, 32 mm dia complete all as specified and directed.
S&F in repairs Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing of CP coupling, waste pipe and all necessary fittings, complete all as specified and directed.
S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms), complete all as specified and as directed.
S&F in repairs 32 mm dia, Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 suitable for waste pipe etc fixed complete to walls, ceilings or in floors etc.
S&F brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed.
S&F PVC connection 15 mm bore with PTMT nuts of length 600 mm long complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F PVC Grating square 150 mm (hinge pattern with or with out waste hole) fixing in floors complete all as specified and directed. .
S&F in repairs 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) bend, plain with or without oval access, including jointing with solvent cement, complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal with access door complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with access door complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) junction, single (Single T) equal or unequal with access door complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) junction, double (double T) equal or unequal with access door complete all as specified and directed.
S&F in repairs 110 mm dia bore PVC (SWR) cowl complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) bend, plain with or without oval access, including jointing with solvent cement, complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal with access door complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with access door complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) junction, single (Single T) equal or unequal with access door complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) junction, double (double T) equal or unequal with access door complete all as specified and directed.
S&F in repairs 75 mm dia bore PVC (SWR) cowl complete all as specified and directed.
M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc, set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick cement screed in cement mortar 1:6, complete all as specified and directed .
M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm as in skirting etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match, laid over and including 10mm thick cement screed in cement mortar 1:4, complete all as specified and directed.
M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed .
M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.
M&L for Vitrified ceremic tiles, polished, light shade, 8 to 9mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed.
M&L for Vitrified ceremic tiles, polished, light shade, 8 to 9mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.
M&L for 18 mm thick green marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4, complete all as specified and directed.
M&L for 18 to 20 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing with white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and directed. Note: Screed bed shall be measured & paid for separately.
M&l for Machine cut Kota stone slab flooring not less than 18-20 mm thick (size of stone shall not less than 55cmx55cm), laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing machine, complete all as specified and directed.
M&L for Machine cut kota stone slab 16-18mm thick as in riser of steps, skirting, dado and pillar laid over & including 10 mm thick cement rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified & directed.
M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver blocks of any shape and size having high glossy finish confirming to IS 15658-2006 of 60mm thickness epoxy coated, M-35 Grade, laid dry over and including 50mm thick washed river sand as approved complete all as specified and directed.
M&L for precast designer coloured paver tiles with glossy finish (factory made rectified) of size 300mmx300mm x 20mm, top layer glazed made in any type of cement and pigment, in required patterns (compressive strength not less than 250 Kg per Sqcm) in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified & directed.
M&L for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in sub base of floors, surface finished even and rough to receive floor finish complete all as specified and directed.
M&L for rendering 10 mm thick plaster in cement mortar 1:3 on concrete surfaces as in ceilings, finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10 mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on brickwork or concrete surfaces of walls, finished the surface even and smooth without using extra cement, mixing with and including WPC @ 200ml/50 kg bag of cement after sweeping/brushing clean and washing down with water complete all as specified and directed.
Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar 1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3 , complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate as in plinth protection, surface finished even and smooth using extra cement including necessary joint filling with mixture of paving bitumen & sand in 1:3 complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted shade including priming surface with chalk whitening, complete all as specified and directed.
M&L for preparation of newly plastered external surfaces of walls and applying two coats of cement based paint, white or tinted including curing before and after paint complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling, roof projection, chajjas and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
M&L for preparation of new surfaces of wooden & wood based articles of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Dismantling of plain or corrugated AC sheeting, any gauge, thickness, including ridge etc as in roof covering complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching, floor by maintaining required gradient / undulation etc slightly rounded or chamferred angles and throating, complete all as specified and directed.
M&L for roof trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade beam, tee, angle, channel or flat sections (ERW or induction butt welded) conforming to I. S.1161-1979 grade St.-240 quality 'A', including welding of distance pieces, cleats, special shaped washer etc. complete all as specified and directed.
M&L for Rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410-S complete all as specified and directed.
M&L for rolled section conforming to Fe-290 (Gde E-165) as in purlins, rafter, rails, fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl dismantelling of existing valley/gutter etc complete all as specified and directed.
S&F in repairs false ceiling of 8 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.
Disconnecting existing PVC tanks, setting aside (or lowering if required) for repair, cleaning and removing all scale and dirt from tanks & month of cirulating pipes etc by using bleaching powder and hosting if required reconnecting and refixing in position of capacity 500 ltrs but not exceeding 1000 ltrs and making good for running of water from tank to inside of bldgs and letter writing of date of cleaning and due on of synthetic enamel paint and complete all as specified and directed. Note : Bleaching powder and like shall be included in this items.
M&L for 25 mm thick (average thickness) PCC1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished even and fair as in roof padding including prepration of surface and mix with water proofing compound and finished even and fair without using extra cement, complete all as specified and directed. Note : WPC shall be measured and paid for separately.
M&L for Complete removal of the existing roof treatment any nos of layers taken out membrane, PCC Padding/roof, tiles etc including grabbing up of tree roots, roughing and prepration surfaces of old concrete floor by picking, scrubbing down with steel brushes, sweeping, cleaning and washing down with water to remove dust etc. and applying the following Roof treatment complete all as specified and directed. (a)Applying 1st course of 15 mm thick screed bed with cement mortar 1:4 over old concrete surface (b)Applying 2nd course of bitumenous primer @ 0.4 kg/Square Metre conforming to IS-3384 over screed bed . (c)Applying 3rd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 centigrade and applied @ 1.2 kg/Square Metre. (d)Applying 4th course of APP (Atactic Polypropylene) modified polymeric 3mm thick, weight not less than 3.6 kg/Square Metre with 160 Grams/Square Metre non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane shall be laid with LPG torch and overlap sealed and finished neat. (e)Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180 centigrade and applied @ 1.2 kg/Square Metre . (f) Applying a coat of bitumenous based aluminium paint as finishing coat.
M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.
M&L for pre-cast PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in cover slabs (for drains), shelves, chajja & similar works with plan faces & set in cement mortar 1:4 including necessary form work complete all as specified land directed.
M&L for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr per 50 Kg of cement complete all as specified & directed. Note : WPC shall be measured and paid for separately.
M & L for bitumen blown any grade, applied hot, two coats, to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for cement concrete 1:5:10 type D-2 (using 40mm graded crushed stone aggregate as in mass filling in sunken floors of kitchens/toilets, complete all as specified and directed.
S&F stainless steel peg set of six of size 480mm x 30 mm x 4mm size fixed with machine screws & rawl plug complete all as specified and directed.
Taking down existing aluminium doors/windows shutter and refixing to same opening after repairing,easing and adjusting incl replacement of damaged hinges,brass mortise lock, sheet glass, door closer, Elco panel 4 mm thick, floor spring, rubber neoprene packing ,aluminium beading, glazing clips and ss screws etc. complete all as specified and directed. Note- Mortise lock, sheet glass, hydraulic door closer, floor spring and composit panel shall only be measured and paid separately.
Supply only Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.
Supply only Sheet glass 4.8mm thick ,ordinary quality fixed with aluminium beading and rubber gaskeet exc 0.50 sqm each. complete all as specified and directed.
Supply only Aluminium 4 Lever Mortice lock, vertical type of size 100mm complete all as specified and directed.
Supply only for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
Supply only 4mm thick Aluminium composite panel for fixing to Aluminium shutter and the like squares with aluminium beading/gasketc complete all as specified and directed.
M/S HIMANSHU BUILDERS (BID ID -3070311)
D S INFRASTRUCTURE AND DEVELOPERS (BID ID -3070655)
M/S NARESH KUMAR SHARMA (BID ID -3081046)
Bidder Name
OMKAR SHARMA AND CO
D S INFRASTRUCTURE AND DEVELOPERS
M/S NARESH KUMAR SHARMA
M/S HIMANSHU BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .