SPECIAL REPAIR TO BUILDING NO P-01 ANDP-116 UNDER GE (NORTH) MAMUN AT MAMUN MIL STN

Amount

Taking down chowkhats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware , complete all as specified and directed.

Taking down chowkhats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but not exc 2 sqm each including builders hardware complete all as specified and directed.

M&L for Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for pressed steel frames 105mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends including 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface complete all as specified and directed.

M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faceS ,The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats incl 02 coats of synthetic enamel paint over a coat of pink primer after preparation of surfaces complete all as specified and directed.

M&L for 18 to 20mm thick one side prelaminated PVC solid board of approved make with acrylic lamination not less than 0.5mm thick (one side decorative choice laminate and other side balancing white) having weight not less than 9Kg/Sqm and average density ranging from 500-700 Kg/Cum fixed as in kitchen cabinet, cupboard and pelmet box fixed with screws to PVC/timber frame work complete all as specified and directed.

M & L for Solid PVC Door Frame of size 50mm x 95mm made out of 5mm wood grain pre-painted PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. Make : Polycon, Echon Industries, Rajshree plastiwood, HR Enterprises

M&L for Factory made solid PVC wood grain pre-painted moulded door shutters, 28 to 30mm thick (stiles), with PVC solid board core not less than 18mm thick and 2, 4, or 6 raised panel design with 5mm thick moulded prelam PVC sheet on the front face & 5mm thick prelam PVC sheet on back face, supplied and fixed in frame at site as per specification and shown in SSR Part-II Section-8 complete all as specified and directed.

Dismantling structural steel work including doors, gates, etc complete all as specified and directed.

M&L for Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners brass handles etc. as specified , erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F in repair galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood of any description exc 10 cm width or girth and providing one coat of synthetic enamel paint all as specified and directed.

M&L for one coats of synthetic enamel paint on old steel surfaces of any description n.exc 10 cms in width or girth, including preparation of surfaces complete all as specified and directed.

M&L for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators (including grills) with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

S&F anodised aluminium window and ventilators shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber packing anodised aluminium snap beading screws anodised aluminium fitting such as peg stays 150mm long (1 No) hinges type B-21 100 mm long (2 Nos) suitable handles complete all as specified and directed.

S&F anodised aluminium doors 100mm x 40mm x 3.15 mm side & top rail 150 mm x 40mm x 3.15 mm middle and bottom rails of side hung type without sash bars, aluminium section including necessary joining cleats glazing clips rubber packing anodised aluminium snap beading screws anodised aluminium fittting such as 150mm long (1 Nos), hinges type B-21 100mm long (3 Nos), 2 Nos tower bolt 150 long, suitable aluminium handles 200mm long (2 Nos), aluminium door stopper omplete all as specified and directed.

S&F mortice lock verticle type size 100mm 4 levers complete all as specified and directed.

M&L for door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and fixed complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 3 mm thick Figured glass (frosted on one side), pin head type and glazing with oil putty in squares not .exc 0.5sqm in each pane complete all as specified and directed.

S&F 100mm long butt hinge medium weight cold rolled complete all as specified and directed.

M&L for 300 mm aluminium alloy sliding door bolt with hasp & staple (bolt type) and fixing clip of sheets cast or extruded section and fixing sliding bolt of extruded section complete all as specified and directed.

M&L for Aluminium anodised barrel tower bolt, extruded section 200mm long , complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame glazed with putty or fixed with beads.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

M&L for 100 mm hasp & staple safety type of alum anodised complete all as specified and directed.

S&F 2nd class Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours articles n exc 200 cu. cm each complete all as specified and directed.

S&F in repair for 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC brackets of approved design/pattern, funnels etc suitable for single curtain rod complete all as specified and approved by GE.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removal of rubbish out off the premises, etc complete all as specified and directed

M&L for Brick work with Fly Ash Brick (Non-Modular) straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and directed.

M&L for Brick work with old serviceable Brick retrieved from dismantling straight or curved oon plan exceeding 6 mtr mean radius and build in cement mortar 1:4 complete all as specified and directed. [Note : Brick retrieved from dismantling to be re-used in this work]

Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking ofr key, scrubbing down with water etc all as specified and directed.

M&L rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

M&L for Rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) using liquid water proofing compound in IInd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. (Note : WPC shall be measured and paid separately)

M&L for rendering 10mm thick on brick work or concrete surface in CM (1:3) on in fasia /edges/ ceiling of chajjas/ roof projections etc surfaces finished even and smooth using extra cement complete all as specified & directed.

M&L for Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface and applying two coat of cement base paint complete all as specified & directed.

M&L for Preparing new / old wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algea and applying two coats of acrylic , antifungal emulsion exterior weather proof paint over a coat of primer as per manufacturer recommendation on external surfaces, complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of distemper oil emulsion (OBD) over a coat of primer as per manufacturer instructions (from same manufacturer of OBD) over a layer of wall care putty not less than 2mm thick complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and apply three coats of white wash on plastered surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and apply three coats of white wash on plastered surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and apply two coats of oil bound distemper on prepared surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and apply two coats of white wash on prepared surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and apply two coats of white wash on prepared surfaces complete all as specified and directed.

M&L for preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coat of cement base paint over a coat of alkali-resistant priming paint all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thickness (below or above gound level) all as directed.

M&L for Cement concrete (1:3:6) type C-1 (using 20mm graded aggregates) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ration 1:2 by weight and complete all as specified and directed.

Dismantling old floor tile incl cement mortar bedding and removal of debris out of premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as specified and directed.

M&L for virtrified tiles 10mm thick (Square or rectangular) polished, area of each tile exceeding 0.36 sqm in floor and skirting etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement , incl screed bed or bedding laters of mortars 15mm thick in CM (1:4) for laying floor finishes all as specified and directed.

M&L for virtrified tiles 10mm thick (Square or rectangular) polished, area of each tile exceeding 0.36 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement , incl rendering 10mm thick in CM (1:4) and finished rough, incl taking down existing surface of walls complete all as specified and as directed.

M&L for Non-skid ceramic coloured tiles 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting / dado/risers of steps ect set & jointed (joint free) in neat cement slurry and pointed in coloured cement including rendering 10mm thick in CM(1:4) and finished rough, including taking out existing finish of wall complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc set & jointed (joint free) in neat cement slurry and pointed in coloured cement including screed bed or bedding layers of mortars 15mm thick in CM(1:4) complete all as specified and directed.

M&L for Glazed ceramic (coloured) tiles 7mm thick, of size 450mmx300mm on vertical surfaces such as dado etc, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match tiles over and including 10mm thick backing coat in cement mortar (1:4), surface finished even and rough to receive tiles, including dismantling existing tiles of any type and pattern including cement mortar backing coat and removal of rubbish out off the premises complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.

S&F 15mm bore tubes medium grade galvanised ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Refixing of old steel tubing 15mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, etc all as specified.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc 10 cm in girth.

S&F 20mm bore tubes medium grade galvanised ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Refixing of old steel tubing 20mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, etc all as specified.

M&L for Stop valve/Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in repairs complete all as specified and directed.

S&F in repair for 15mm bore bib taps fancy type with wall flange, chromium plated cast copper alloy long body with capstan heads, screwed for iron pipe or brass ferrule complete all as specified and directed.

M&L for Vitreous china wash hand basin, white, flat back, size 550x400mm (Make : Jaquar Cat part No CNS-WHT-801 or equivalent model in Hindware/Parryware/Somany) including 15mm bore fancy type Pillar taps, cast copper alloy, with long screwed shank and fly nuts, chromium plated (Make : Jainko Cat part No PCJ-1 or equivalent model in Hindware/Marc.) brackets, CP waste coupling, 32mm bore PVC waste pipe of min 600mm long & 15 mm bore PVC connections, including cutting for and pinning in end of brackets or erecting stand fixed in repairs complete all as specified and directed.

S&F in repairs towel rail CP 600 mm long complete all as specified and directed

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass sheof 12cm wide with chromium plated brackets guard & railing 120cm long.

S&F liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms)

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, incl supply and fixing of PVC seat and cover for pedestal pan complete all as specified and as directed.

S&F in repair PVC flushing cistern dual flush type 10 ltr capacity incl PVC connection inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessay connections to water supply pipe line and jointing to WC all as specified and as directed.

S&F in repair for Vitreous China urinals, half stall urinal type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, waste coupling , and Union for discharge pipe. complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make:Paryag/Polytech

S&F in repair for Rotational moulded polyethylene water storage tanks three layer of capacity 500 litre three layers, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure with polythene float and dismantling of existing PVC tank of any capacity, complete all as specified & directed.

S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper chromium plated fancy type allowy ISI marked with crutch or butter fly handles screwed down screwed.

S&F in repair for 75 mm Cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for false ceiling of 9mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanished sections in a grid size of 600x600mm of manufacturer M/s Saint Gobin or equivalent in Armstrong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete.

S&F Structural tubular steel works as in rafter, purline, posts, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 GRADE ST-240 including dismantling structural steel works complete all as specified and directed.

S&F wind ties for roof including all as necessary drilling, bolting etc conforming to Fe-290-O or Gde E-165 including dismantling any type of ties, binders etc complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI base corrugated steel sheet 0.5 thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of existing sheets complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI base plain steel sheet 0.5 thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of existing sheets complete all as specified and directed.

Dismantling brick tile or terracing tiles single layer on roof complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 padding as in roof, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 20mm thick cement plaster in cement mortar 1.4 on concrete surface finished even and smooth using WPC liquid of make Dr. fixit or STP as per manufacturer instructions @ 0.200 ltr in 50 Kg of cement complete all as specified and directed.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy parapet wall to be executed and directed:- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter /Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap, laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Supply only Polymer liquid water proofing compound of make Pidilite/Bauchemic/Fosrock, all as specified and directed.

Taking down carefully unserviciable/ damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc ) and removing material from site and making good to the disturbed surface to match with existing finish complete all as specified and directed.

M&L for Modular Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box and approved make sunken modular metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for mounting modular switches/ sockets etc, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point complete all as specified and directed. (Note : Modular switch/bell push/fan regulator etc shall be measured and paid separately under respective items.)

All as per Srl item No. 93 above but for 5 pin 5 Amp socket outlet point on independent gang box and suitable support frame and cover plate (inner/outer) controlled by one switch 5Amp one way, etc complete all as specified and directed.

All as per Srl item No. 93 above but for 5 Pin 5 Amp socket outlet point on same board controlled by one switch 5 Amps one way on same gang box support frame and cover plate etc complete all as specified and directed.

All as per Srl item No. 93 above but for one 15Amp socket outlet point concealed using 2.5Sqmm FRLS PVC insulated multi-strand copper conductor wire including 2.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finishes complete all as specified and directed.

S&F Modular Socket outlet, 5 pin, multi purpose 2 module 6 Amps, AC 230 volts, etc complete all as specified and directed. Make : Crabtree (Verona) Cat Part No : ACVKSWW065 or equivalent of Legrand/Siemens/Schenider/Anchor Roma.

S&F Modular Socket outlet, 5 pin, multi purpose, 2 module 6/16 Amp, AC 230 volts, etc complete all as specified and directed. Make : Crabtree (Verona) Cat Part No : ACVKCWW163 or equivalent of Legrand/Siemens/Schenider/Anchor Roma

S&F Modular bell push, 10 Amp, AC 230 Volt etc complete all as specified and directed. Make : Legrand Cat Part No 673404/ Anchor Roma Cat Par No 289101/ Schenider Cat Part No P1005.

S & F modular switch piano type flush button 16 Amp one module, complete all as specified and directed. Make : Legrand Cat Part No 673009/Crabtree Cat Part No ACMSXXW102/Anchor Roma Cat Part No 66104.

S & F modular switch piano type flush button one way 06/10 Amp one module complete all as specified and directed. Make : Legrand Cat Part No 673000/Crabtree Cat Part No ACMSXXW101/Anchor Roma Cat Part No 66111.

S&F Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65mm, three terminals, AC 230 volts etc complete all as specified and directed.

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed. Make : Legrand Cat Part No 673028/Crabtree Cat Part No ACARFHW005/Anchor Roma Cat Part No 66502.

S&F for Bell Ding Dong AC 230 Volt, single Pole complete all as specified and directed. Make : Anchor Cat Part No 8024/Cona Cat Part No 2856/ Anchor Cat Part No 8272/GM Cat Part No 4001.

S&F Single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCB 20 Amps 240 volts (B-series) complete all as specified and directed. Make : Legrand/Schneider/Hager

Taking down ceiling fan of any sweep & size and refix in same position after overhauling including minor repairs by replacement of capacitor, safety pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed.

M&L for 1x20 watt white powder coated CRCA Box type LED batten with decorative end cap including polycarbonate LED tube lighting fixture, energy efficient, 230 volts wall mounted complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable of suitable size including taking down old UNSV tube light fitting any type, complete all as specified and directed.

S &F the Bulk head light fitting LED type 10 watt complete with 10 watt LED and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose with & including PVC insulated and overall sheathed flexible copper conductor cable and including 3 core 0.50 Sqmm complete all as specified and directed.

S&F recess mounted die cast aluminium square downlighter with high transmission diffuser offers bright and uniform ilumination LED with full difusser of 31 Watt LED Panel ,Complete all as specified and directed.

M&L for Fancy type wall mounted luminaire with decorative diffuser, lamp holder and mounting clips including 9W LED lamp B22 with all accessories and connecting with ceiling rose with and including 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable and testing etc complete all as specified and directed.

S&F high performance IP 65 LED bldg street light fitting of 30 watt arrangement complete all as specified and directed.

S & F mirror light 7 watt LED type with all accessories including inbuilt lamp connecting electrically to ceiling rose using cord flexible 3core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

S&F Lamp holder insulated body with back plate suitable for batten fitting including 14W LED lamp of approved make and cat part and PVC Round/Square block etc complete all as specifeid and directed.Notes : Notes for Srl item No 107 to 113:- 1. Driver shall be potted antivibration type. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be povided. 3. CRI (Colou Rendring Index) of fixture shall be > 70. 4. CCT (Colout Correlated Temprature of fixture shall be 5700K ± 300 K. 5. System Lumen Efficacy shall be > 100Lm/W 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 5 years gurantee shall be provided by contractor suppoted by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the Contractor shall replace / repair the defective fitting within 07 Days after handing over to Contractor for replacement / repair 11. CA No shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintaince required, if any can be carried out from Top cover.

S&F double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 2+6 way double door openable complete, including taking out old unsv MCB DB any size/type complete all as specified and directed. [Make : Legrand/Schneider/Hager]

S&F in replacement distribution board iron clad,double door with IP-43 protection suitable for MCCB as incomer and MCB as outgoing 415 Volts 3 phase 50 C/S '4' way, complete with and including approriate size copper busbar and neutral link complete with one MCCB 3 pole 415 Volts 100 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge. [Note :- Outgoing MCB will be measured and paid separetly]

S&F for MCB single pole (SP) 240 volts, 6 to 32 Amps, 10KA (C-series) , complete all as specified and directed. Make : Legrand/Schneider/Hager

S&F for MCB single pole (SP) 240 volts, 40 to 63 Amps, 10KA (C-series) complete all as specified and directed. Make : Legrand/Schneider/Hager

S&F for MCB single pole neutral (SPN) 240 volts, 40 to 63 Amps, 10KA ((C-series) complete all as specified and directed. Make : Legrand/Schneider/Hager

M&L for Sub main wiring with FRLS PVC insulated unsheathed 2X6 sqmm multistranded copper conductor cable 1100 V with 1X6 sqmm FRLS PVC insulated green multistranded copper cable for continuous earth drawn through & including concealed PVC conduit of appropriate size not less than 20 mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing including taking down existing surface sub main wiring complete all as specified and directed. (Note: Two runs of FRLS PVC cable with one run of earth conductor and conduit shall be measured as one RM.) Make for wiring : Polycab/Anchor/Finolex

M&L for Sub main wiring with FRLS PVC insulated unsheathed 2X4 sqmm multistranded copper conductor cable 1100 V with 1X4 sqmm FRLS PVC insulated green multistranded copper cable for continuous earth drawn through & including concealed PVC conduit of appropriate size not less than 20 mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing including taking down existing surface sub main wiring complete all as specified and directed. (Note: Two runs of FRLS PVC cable with one run of earth conductor and conduit shall be measured as one RM.) Make for wire : Polycab/Anchor/Finolex

M&L for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, HDPE pipe 15mm bore as protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in unit rate quoted by the contractor. 2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels .

M/S INDIAN ELECTRICAL

GANDOTRA CONSTRUCTION CO

M/s. RAMESH KUMAR

Raghbir chand

RD Engineers

M/S J N TRADERS

naresh kumar sharma