Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
31 Dec 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Research & Design Centre
HINDUSTAN AERONAUTICS LIMITED Aircraft Research & Design Centre, Marathahalli Post, Bangalore - 560 037 Ph : 091-080-5233035 Extn : 324 Fax : 091-080-5237132
Development and Supply of Indigenous Composite Prepreg- UD and BD
9507
D/IMM/COM3/5440/7R/2/1
Works
Design Complex -ARDC-Bangalore-PM-Consumables
₹0
Exempted
31 Dec 2024
31 Aug 2024
31 Aug 2024
31 Dec 2024
ARDC HINDUSTAN AERONAUTICS LIMITED Vimanapura Post Bangalore - 560 017 INDIA
Public Procurement (Preference to Make in India) - Part of Technical Bid. Appendix-A
Tender Ref. No: :D/IMM/COM3/5440/7R/2/1
Name of Work : Development and Supply of Indigenous Composite Prepreg (UD & BD)
Name of the Vendor/ Firm:
Quotation Ref. No.:
PLEASE INDICATE YOUR RESPONSE/ COMPLAINCE/ ACCEPTANCE TO THE FOLLOWING TERMS (MANDATORY) AND UPLOAD AS A PART OF TECHNICAL BID
SL. NO. HAL RFQ terms & conditions Vendor Compliance (Complied/ Non -complied)
1 In line with Public Procurement (Preference to Make in India), Order 2017 & its various amendments issued by Govt. of India from time to time & with a view to support the Indian industries, HAL has implemented “Purchase Preference Policy”. The “Purchase Preference” is applicable for the “Class-I Local Supplier” for the goods/services/works covered in this tender subject to the following terms & conditions:
Note (a) The subject item falls under indivisible category (indicate divisible/ indivisible).
(b) The offers sought only from Class-l & Class-Il Local supplier.
1 1. Definitions: a. Class-l local supplier means a supplier or service provider, whose goods, services or works offered for procurement meets the minimum local content of 50%. b. Class-Il local supplier means a supplier or service provider, whose goods, services or works offered for procurement meets the minimum local content of 20%. c. Non- local supplier means a supplier or service provider, whose goods, services or works offered for procurement has local content less than 20%. d. Foreign Supplier means an overseas supplier.
2 Local content’ means the amount of value added in India (i.e., indigenous items/services added in the offered products/services/works) which shall be the total value of the item procured (excluding net domestic indirect taxes) minus the value of imported content in the item (including all customs duties/IGST) as a proportion of the total value, in percent
3 The margin of Purchase Preference shall be upto 20%.
4 ‘Margin of purchase preference’ means the maximum extent to which the price quoted by the "Class-I local supplier" above the L1 (landed cost).
5 ‘L1’ means the lowest technically accepted tender / bid / quotation (i.e. lowest landed cost including duties, taxes and freight & Insurance).
6 Works' means all works as per Rule 130 of GFR- 2017, and will also include 'turnkey works'. Works includes Engineering, Procurement and Construction (EPC) contracts and services include System Integrator (SI) contracts.
7 Purchase Preference:
A. Goods/Services/Works which are divisible in nature (required quantity greater than 1 or not a package basis or not Aircraft LRUs):
i. If L1 is 'Class-l local supplier', the order/contract for full quantity shall be awarded to L1 bidder.
ii. If L1 bid is not from a 'Class-l local supplier', 50% of the order quantity shall be awarded to L1. Thereafter, the lowest bidder among the 'Class-l local supplier' will be invited to match the L1 price for the remaining 50% quantity subject to the Class-l local supplier’s quoted price falling within the margin of purchase preference (i.e. 20%) and contract for that quantity shall be awarded to such Class-l local supplier subject to matching the L1 price (inclusive of duties, taxes and freight & insurance).
iii. In case such lowest eligible 'Class-l local supplier' fails to match the L1 price or accepts less than the offered quantity, the next higher 'Class-l local supplier' within the margin of purchase preference shall be invited to match the L1 price for remaining quantity and so on, and contract shall be awarded accordingly. In cases where none of the 'Class-l local supplier' within the margin of purchase preference agree to match L1 price, in such cases 100% quantity shall be ordered on original L1 bidder.
iv. In case no offers received from 'Class-l local supplier' or none of the 'Class-l local supplier' falls within the margin of purchase preference of 20%, the order shall be processed on L1 vendor.
v. In case L1 bidder (not a 'Class-l local supplier') is not accepting splitting of order on 50:50 basis, in that case the order/contract shall be awarded to such 'Class-l local supplier' for full quantity subject to matching the L1 price.
vi. Regarding MSEs (Indian vendors): The following additional aspect as indicated below would applicable for procurement which are falls under divisible category (i.e., not applicable for indivisible category), in case of participation of MSEs in the tendering. If any Indian vendor satisfies the requirement of MSEs stipulation and also falls within the purchase preference margin as called for in MSME policy (in case of matching L1 price) will be considered for ordering 25% of tendered quantity, the balance quantity / works will be considered for distribution amongst all bidders (including MSEs) as per this purchase preference policy. In case no MSEs qualifies for purchase preference or do not match with L1 price then the total tendered quantity will be distributed amongst all bidders as per this purchase preference policy.
Aircraft LRUs in case of goods) and Services: i. If L1 is from a 'Class-l local supplier' the contract will be awarded to L1 bidder. ii. If L1 is not from a 'Class-l local supplier', the lowest bidder among the 'Class-l local supplier' will be invited to match the L1 price subject to Class-I local supplier’s quoted price falling within the margin of purchase preference (i.e. 20%) and the contract shall be awarded to such 'Class-l local supplier' subject to matching the L1 price (inclusive of duties, taxes and freight & insurance). iii. In case such lowest eligible 'Class-l local supplier' fails to match the L1 price, the 'Class-l local supplier' with the next higher bid within the margin of purchase preference shall be invited to match the L1 price and so on, and order/contract shall be awarded accordingly. In case where none of the 'Class-l local supplier' within the margin of purchase preference agree to match the L1 price then the order/contract shall be awarded to the original L1 Bidder.
8 Technically acceptable offers only will be considered for further process.
9 Self Certification and Auditor Certificate: i. The ‘Class I & II local suppliers' should provide a “Self Certification” as per the format enclosed at Appendix-B(Type-I) along with technical offer indicating the % of local content along with details of the location(s) at which the local value addition is made along with the technical offer. ii. In cases the quoted price is in excess of Rs.10 Crs (including duties, taxes and freight & Insurance), the 'Class-l & II local supplier' shall provide a certificate as per the format enclosed at Appendix-B(Type-II) from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in case of suppliers other than companies) indicating the percentage of local content along with the technical offer. iii. The above sought “Self-certification” shall be provided on vendor’s letter head. On similar line for Rs.10 Crs. & above, the certificate need to be provided by the concerned authority as brought out above. iv. In case of online tender, scanned copy of the certificate need to be uploaded along with tender and parallely the hard copy of original certificate should be submitted to the Division through post/courier.
v. In case tender calls for the offers from only Class I & II local suppliers: a. Any bidder has not indicated any % of Local content and also not provided Self Certification, they fall under non local category. As such those offers also will not be considered & rejected. b. Further, the offered product should meet the minimum local content requirement of 50% for Class-I local supplier & minimum local content requirement of 20% for Class-II local supplier. If the offered minimum local content is less than called for in the tender, the offer will not be considered & rejected, as the offer is sought from local suppliers with notified MLC.
vi. In case tender calls for the offers from any suppliers: a. In case the offers sought from any suppliers (i.e. including non-local supplier / overseas supplier), suppliers should provide “Self Certification” indicating the % of local content offered along with details of the location(s) at which the local value addition is made. The purchase preference shall not be applicable (i) in case of non-submission of “Self Certification” and (ii) in case of the offered minimum local content is less than 50%. b. In case a supplier fails to indicate MLC in the specified place in Technical bid & also forgets to enclose the Self Certification, such bidder will be treated as Non-Local supplier & will be dealt accordingly as per the RFQ stipulation.
vii. It is expected that the bidder has to indicate MLC as part of offer & Self Certificate and Auditor might have also indicated MLC as per their certification. In case there is difference in those values, the lowest of them will be considered as the applicable MLC & the offer will be dealt accordingly. Other MLC information will be treated as invalid.
10 A committee (with an external expert from a practicing cost accountant or practicing chartered accountant, if required) constituted for independent verification, shall verify the self-certificate (or) auditor’s / accountant’s certificates (as applicable) on random basis, as per the requirements.
11 In case of a complaint received from any supplier indicating a need for review / verification of Local content of successful vendor / awarded vendor, for accepting a complaint from such complainant (w.r.t the false declaration given by the successful vendor / awarded vendor on the local content), a complaint fee of Rs.2 Lakhs or 1% of the locally manufactured items being procured (subject to a maximum Rs.5 Lakhs), whichever was higher, to be paid by demand draft by the complainant. In case, the complaint is found to be incorrect, the complaint fee shall be forfeited. In case, the complaint is upheld and found to be substantially correct, deposited fee of the complainant would be refunded without any interest.
12 False declarations will be in breach of code of the integrity for which a bidder or its successor’s will not be eligible/debarred for purchase preference from further tenders / pending tenders for two years along with other actions as may be applicable.
13 Further, in case the violation/false declaration established, in such case, a penalty amount upto 2% value of the each order will be deducted on such defaulted bidders.
14 The Public Procurement (Preference to Make in India), Order 2017 issued by Govt. of India indicates that if there are any general or specific restrictive clauses to restrict participation of Indian companies in those countries procurement tenders, reciprocity clause need to be invoked as per the order. Hence, if HAL or Govt. of India come across that Indian suppliers of an item are not allowed to participate and/or compete in procurement by your government, the bid submitted by you will be not be considered and excluded from eligibility for procurement. This aspect may please be taken note off.
Aircraft Research and Design Centre HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037. INDIA
COMMERCIAL TERMS AND CONDITIONS - PART OF TECHNICAL BID
Tender Ref. No.: :D/IMM/COM3/5440/7R/2/1
Type of Bid: Two Bid System (This sheet is a part of Technical cum non-price bid )
Name of Work: Development and Supply of Indigenous Composite Prepreg (UD & BD)
Name of the Vendor/ Firm: (To be indicated by vendor / firm) (Active Contant Number & email ID to be Indicated)
Quotation Ref. No.: (To be indicated by vendor / firm)
PLEASE INDICATE YOUR RESPONSE/ COMPLIANCE/ ACCEPTANCE TO THE FOLLOWING TERMS (MANDATORY) AND UPLOAD AS A PART OF TECHNICAL BID. IN CASE OF ANY PRICE INFORMATION PROIVIDED IN TECHNICAL BID, EVEN IN THE FORM OF PDF, THE TECHNICAL BID WOULD NOT BE CONSIDERED FOR EVALUATION AND TREATED AS INVALID.
COMMERCIAL TERMS & CONDITIONS
Sl No. Description Vendor’s Compliance
1 Submission of tender in two bid system: Bidders are requested to submit their proposals in two bid. Bidders to ensure that the price details are not mentioned in the technical bid, failing which such offers will not be considered for evaluation. Vendors to ensure that the pricing aspects either in PDF form or any other form is not mentioned in the technical bid zone, else such offers will be rejected and will not be considered for evaluation.
2 Delivery and Passing of Property & Risk:-
Delivery and Passing of Property & Risk shall be on F.O.R, ARDC-HAL basis.
3 Receipt & Despatch: The Vendor is responsible for obtaining a clear receipt from the Transport Authorities specifying the goods dispatched. He will not book any consignment on a said to contain’ basis. If he does so, he does it on his own responsibility. HAL will take no responsibility for short deliveries or wrong supply of goods when the same are booked on said to contain’ basis. HAL shall pay for only such stores as are actually received by them in accordance with the contract
a Vendor should fill in the Price Format Excel file (Annexure-3) downloaded from e-procurement portal. Prices should not be indicated in any other places. It should be complete in all respects. No subsequent addition/ alteration/ claim will be entertained over and above the quote. Offers without complete information and pricing will be treated as incomplete and will not be considered for further evaluation. The commercial evaluation will be based on packages i.e. for Design phase and production phase together.
b The prices quoted should be firm and fixed for the entire duration of the Contract.
c Issuance of this RFQ does not bind HAL or its customers for ordering for series production requirements.
d Vendor should also attach price formats filled-in with all details without prices. The price figures should not be filled-in in the format. Vendor should only indicate ‘Quoted’/’Not Quoted’/’Not Applicable’ in the price format and enclose the same along with the Technical bid of the tender.
e Indian Bidder should quote in Indian Rupees only and payment will be made in Indian Rupees. Offers from Indian Bidders quoting in Foreign currency will not be considered for evaluation.
f Bidders should clearly mention whether the prices holds good when the full quantity of enquiry is not ordered but only a part of it. Unless otherwise mentioned, it would be assumed that the rates hold good even when lesser quantities than those enquired of are ordered. Any increase in prices at a later date for ordering lesser quantities will not be agreed to.
g Vendors should note the following, if exchange rate variation is claimed on the quoted prices: In case the item / product offered by Indian vendor has import content, then the value of import content shall be indicated in the quotation (in FE / INR as the case may be). If the products/items/materials quoted by the Indian vendors involves import content, then the value of import content needs to be indicated in the offer (in FE). Further, vendor should indicate whether Exchange Rate Variation(ERV) is applicable on the FE content declared by the vendor. If ERV is applicable, ERV reckoning date shall be the last date of submission of commercial bids (i.e. due date of the tender). For purpose of making ERV payment, actual value of import (to be supported by BOE, etc) or declared value of import in bidders quote whichever is lower will be considered for calculation of ERV based on TT selling rate on the date of BOE. Exchange rate variation on the higher side, shall be paid by the HAL and similarly any exchange rate variation on lower side i.e. price reduction, to be passed on to HAL.
h Repeat Order Requirement: In the event of placement of purchase order, HAL reserves the right to place repeat Order up to 100% of the value of the original order (statutory levies shall be paid as applicable) within 12 months from the date of completion of the original order. The prices, terms and conditions of the repeat order shall be the same as that of the original. However, placement of repeat order is not guaranteed and this will be at the sole discretion of HAL. “Repeat Order can be placed by any Division/Office of HAL including the Division/Office which has originally placed the purchase order.
5 Price Variation Formula:- (Applicable for Supplies/Delivery beyond 2033)
Price variation formula has to be as per format given below :
P = Po ( A + B x L/Lo + C x M/Mo)
P = Final price applicable for PO Placement at the relevant year.
Po = The base price at 2023 economic conditions
Lo – Average Labour Index of the base year 2023
Mo – Average Material Index of the base year 2023
L – Labour Index for the month of placement of PO in the relevant year.
M – Material Index for the month of placement of PO in the relevant year.
A = Percentage corresponding to fixed element of price ( not subject to variation ). A should not be less than 15% ). B & C= Coefficients in percentages corresponding to labour and material respectively.
The Maximum annual escalation(CAP) applicable (percentage) with the above price variation formula to be mandatorily indicated.
The indices should be officially published figures (preferably by a Government agency) and vendor may indicate the official publications / organizations / websites publishing these indices for reference & verification by HAL.
6 Validity of quote:- Quote should be valid for 270 days from the closing date of the present RFQ.
7 Delivery period: Please refer Technical Compliance Matrix (Annexure-1) as per part of Technical Bid of the RFQ
8 Extension of Time: If an extension is desired by the Vendor/Supplier, then Vendor/Supplier shall apply for extension of time to HAL at least 15 days prior to the date of delivery without prejudice to the rights of HAL, then HAL may grant extension of time for any cause which HAL may deem proper and the decision of HAL in this respect to be final and binding and cannot be questioned in any manner whatsoever.
9 Payment Terms:- For supply of items: 100% payment will be made within 30 days after delivery and acceptance of items at our Stores. For HW Testing at NABL Accredited Lab by Vendors (NRC) : 100% payment within 30 days by way of NEFT / RTGS transfer after receipt of test results by HAL and Acceptance & Certification by User dept. All payments will be done by way of NEFT / RTGS/ SWIFT Electronic Payment remittance mode. For the purpose of making payments, vendor to provide the following; a) Original Ink signed Commercial Invoice, b) Airworthiness certificate/ Certificate of Conformance / Release Note etc., as applicable c) Acceptance test report (ATR) for system or its components, spares as applicable. d) Any other documents specifically mentioned in the Purchase Order.
10 In case, the vendor does not accept the above payment terms and proposes alternative terms then HAL will appropriately adjust the quoted prices to account for the effects of the differences in payment terms. Although the exact adjustment will differ on a case by case basis, the following adjustments will mandatorily be made for making all the bids strictly comparable independant of the actual payment terms quoted by bidders. i) In case of Letter of credit, the estimated bank charges for operating the LC will be added to the quoted price. ii) The effect of time value of money arrising out of differing payment terms will be computed using an appropriate discount rate and will be added to the quoted price.
11 Taxes / Duties: Applicable for Supply of Goods & Services: Indian vendor has to indicate the applicable GST along with relevant HSN code in the price bid. In case, the price bid does not contain the GST elements it would be treated that the indicated price is inclusive of all applicable GST elements. Indian bidders to provide GSTIN Registration details of the company from where the items will be supplied. If the company is not registered in GST portal, please provide reasons for not registering. TDS for GST: Applicable TDS as per the prevailing guidelines of Government of India will be deducted while making payment.
12 Security Deposit: The Successful vendor shall have to deposit 5% of the value of the order as Security Deposit (to be calculated only on basic cost excluding taxes & duties, if such details are furnished separately in the bid submitted) within 15 days of receipt of the purchase order, by demand draft or bank guarantee in a prescribed format of HAL from a schedule bank in India, valid up to 60 days after the completion of contract period/last supply. This Security Deposit will bear no interest and will be returned only after the contract is completed to the entire satisfaction of HAL. In case, quotes received without indicating the break-up details of GST, ED etc. and order placed subsequently on composite value (without indicating break-up details of taxes & duties) then the Security Deposit to be sought on the composite value (including taxes & duties). a) In case the contract is not executed to the entire satisfaction of HAL the security deposit shall be forfeited, besides initiation of risk purchase action. b) No claim will be entertained against HAL either in respect of interest, if any due on the security deposit or depreciation in value. c) On due performance and completion of the contract in all respects, the security deposit will be returned to the vendor, without any interest, on presentation of absolute “No Demand Certificate” and upon return in good condition of any specifications, drawings, samples or any other property belonging to the purchaser, which may have been issued to the vendor Note: For bidders who do not agree to submission of Security Deposit, the quoted price will be increased by 5% and such enhanced quote will be used for price comparision with other bidders.
13 Warranties:- Vendor warrants as follows: i) All items delivered are free from defects in materials and workmanship. ii) All items delivered are in conformance to the specification and are fit for the intended purpose. iii) It shall be ensured that HAL shall have clear and undisputed title to the goods supplied under the contract.
14 Warranty Period: Warranty shall be valid for 12 months from the date after the goods have been accepted at HAL. Warranty to cover against any defect in design, workmanship, materials and non-conformance to intended purpose. During the warranty period equipment shall be replaced / repaired free of cost. Any to and fro freight / insurance involved has to be borne by the vendor. Warranty is assignable by HAL to its customer and HAL’s customer will have all rights and benefits of the warranty clause. All warranty replacements need to be affected expeditiously so that program schedules are not unduly compromised.
15 Post-Warranty Service: Arrangements for after sales service and maintenance (authorized service centre) in India on site during warranty & post warranty period should be clearly indicated providing with name, address, phone, Mob no, email Id of the contact person, infrastructure along with spare parts inventory held by your Authorized Technical Service Center. The Vendor to indicate the validity period of authorization for the technical service center
16 Non-disclosure Agreement (NDA): Sucessful bidder has to sign a Non-disclosure Agreement (NDA) strictly as per the HAL format and should be submitted the same to HAL in hard copy prior to placement of PO. Format Enclosed.
16A. "The successful supplier shall execute the order/contract as per the requirement and ensure the compliance of clauses like performance of order/contract, warranty etc. as required under the order/contract. Any non-compliance of order/contract requirements, shall entitle HAL to initiate appropriate penal actions as deemed necessary, including banning of such supplier for a period upto two years besides invoking of Bank Guarantee"
17 Restrictions on procurment from bidders from a country which shares a land border with India:
a Bidder’s country which shares a land border with India: Any bidder from a country, which shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority (i.e. the registration committee constituted by the Department for Promotion of Industry and Internal Trader (DPIIT). However, the bidders from those countries (even if sharing a land border with India) to which the Government of India has extended lines of credit or in which the Government of India is engaged in development projects are not required to register with Competent Authority and will be eligible to bid in this tender.
b All the participating bidders have to mandatorily submit the relevant certificate as per format attached as ANNEXURE-II A and ANNEXURE-II C (either Type-I or Type-II), at the time of submiting the Technical bid along with their offer.
c Bidder from a country, which shares a land border with India, for the purpose of this Order means:- i) An entity incorporated, established or registered in such a country; or ii) A subsidiary of an entity incorporated, established or registered in such a country; or iii) An entity substantially controlled through entities incorporated, established or registered in such a country; or iv) An entity whose beneficial owner is situated in such a country; or v) An Indian (or other) agent of such an entity; or vi) A natural person who is a citizen of such a country; or vii) A consortium or joint venture where any member of the consortium or joint venture falls under any of the above.
d Unless otherwise stipulated in the Contract, country of origin of ‘Services’ and related ‘Goods’ under the contract shall have their origin in India or other countries and must conform to the declaration, made by the Supplier in its bid regarding but not limited to any restrictions on certain countries with land-borders with India
e The successful bidder shall not be allowed to sub-contract works to any contractor from a country, which shares a land border with India unless such contractor is registered with the Competent Authority. c) Minimum Local
18 Purchase Preference Policy : Please refer Appendix-A for policy details. Provide your compliance to this policy by indicating Complied against this coloumn. In line with Public Procurement (Preference to Make in India), Order 2017 & its amendments issued by Govt. of India & with a view to support the Indian industries, HAL has implemented “Purchase Preference Policy”. The “Purchase Preference” is applicable for the “Class-I Local Supplier” for the goods/services/works covered in this tender subject to the Terms & condition of Purchase preference clause as attached at Appendix-A Type-II. Note: (a) The subject item falls under INDIVISIBLE category. (b) The offers sought from all suppliers i.e. Class-l, Class-II Local supplier only. (d) The margin of Purchase Preference shall be up to 20% only for Class-I Local Supplier. The bidders are requested to go through the same & submit the bids accordingly and provide the compliance for the same. This Tender envisages the selection of an INDIAN LOCAL SUPPLIER (Class-I or Class-II) for supply of subject items. Quote received from Indian local suppliers only will be considered & accordingly only Indian vendors (Minimum 20% Local Content) needs to participate in this Tender. Quotes received from foreign source / Non Local Suppliers will not be considered and will be rejected.
19 (a) Purchase preference to Micro and Small Enterprise (MSEs): Purchase preference will be given to MSEs as defined in public procurement policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. Relevant documentary evidence in this regards shall be submitted along with the technical bid in respect of the offered product. If L-1 is not an MSE and MSE Seller(s) has/ have quoted price within L-1+15% of margin of purchase preference /price band , such seller shall be given opportunity to match L-1 Price and contract will be awarded to such MSE supplier subject to matching the L1 price (inclusive of duties, taxes and freight & insurance).
19 (b) Registration of MSEs on TReDS Platform
i Whether your firm is registered with TReDS (Trade Receivables Discounting System). If so provide the details/ certification of registration.
ii "Govt. of India has informed that all MSEs vendors registered with CPSEs to be on boarded mandatorily on any available TReDS platform like M/s RXIL, M1Xchange, Myndsolutions, Invoicemart, etc.
iii Hindustan Aeronautics Limited (HAL) has on-boarded on the TReDS (Trade Receivables Discounting System) Exchange through M/s RXIL, M1Xchange, Myndsolutions, Invoicemart for enabling payment through TReDS platform as a Buyer and could consider making payment to our MSME Vendors through this platform if MSME seeks such support.
iv One-time registration for the MSME Sellers on TReDS Platform will be providing access to all the Buyers (PSUs/Govt. Agencies/Corporates/MNCs) who are registered on the TReDS Portal. Even MSMEs intend to receive payments in the normal route rather than TReDS portal, to address any immediate requirement of operation through TReDS for want of funds etc., it would be ideal to on-board on portal, since it takes some time to process on-board. Subsequently, whether to upload specific invoice in the portal could be taken up by vendor on case-to-case basis at appropriate time. In this regard, we look forward to you joining the TReDS Platform to avail the facility and provide us the registration details.
20 TECHNICAL EVALUATION: Technical bids submitted by the vendors would be opened and examined for adherence/ compliance to the requirements as specified in this RFQ. In case of ambiguity in statements given by the vendors, HAL may seek information/ clarification from any or all the vendors. Only such offers that meet HAL technical requirements shall be short listed for further commercial evaluation. HAL’s discretion in this regard is absolute.
21 Commercial Bid Opening: Commercial bids of short listed vendors whose technical bids have been found to be meeting HAL’s requirement would be opened online. Technically qualified bidders may witness the tender opening online by logging into HAL e-Procurement portal.
22 COMMERCIAL EVALUATION: The commercial evaluation shall be carried out based on the total price as indicated at Annexure-3. For comparison purpose the prices quoted by the vendors would be loaded with applicable Indian taxes and duties, etc. as applicable at the time of technical bid opening to arrive the total landed cost to HAL. For comparison purpose the quotes indicated therein might be adjusted for non-compliances or partial compliances of commercial terms and conditions as mentioned at appropriate places in this RFQ.
23 Liquidated Damages:- In the event that any supply under the PO/contract is delivered later than agreed schedules in the PO/contract, liquidated damages will be payable / deducted from Invoice equal to 0.5% for every week of delay or part thereof on the delayed portion of the order subject to a maximum of 10% of the value of the delayed item. In case of bidders not agreeing for LD clause or willing to accept a maximum percentage which is less than 10%, then, 10% of the quoted price or the difference in value between 10% of the price and the maximum agreed by the vendor will be added to the actual quote submitted by the vendor for comparision with other bidders in order to determine the lowest bidder.
24 Inspection, Consequences of Rejection: The goods on receipt in HAL will be subject to inspection and tests, if necessary and HAL inspector’s decision as regards acceptance/rejection of goods shall be final and binding between the parties. (In case of Plant & Machinery, goods shall be finally inspected & accepted only after successful commissioning) If any stores are rejected, then HAL shall be at liberty to: a) Either: i) Allow the contractor to re-submit stores in replacement of those rejected within a time specified by HAL, the contractor bearing the cost of freight in such replacement without being entitled to any extra payment, (or) ii) Buy the quantity of stores rejected or other of a similar nature elsewhere at the risk and cost of the contractor without effecting the contractor's liability as regards the supply of any further consignments due under the contract, (or) (iii) Terminate the contract and recover from the contractor the loss HAL may thereby incur. The contractor shall not be entitled to any gain on the repurchase,
Any stores rejected by HAL’s Inspector must be removed by the contractor within 14 days from the date of receipt of intimation of rejection and at his own cost, failing which the contractor shall be liable to pay storage charges at 1% for each day of delay on the invoice value of the stores. If the stores are not removed within a month from the date of intimation of rejection, the stores will be liable, to be sold by HAL at the contractor’s risk and responsibility and the proceeds adjusted towards storage charges. c) In case any payment is made against delivery and it is found that the supplied item is rejected during inspection/commissioning, contractor will be required to choose any one of the following options to collect the rejected item for replacement: i) Refund the amount paid and collect the item for replacement. ii) Submit a Bank Guarantee for the amount already paid and collect the item for replacement. iii) Bring the replacement item to HAL and collect the rejected item
25 Requirements of ISO 14001:2015; Environmental Management System (EMS): I. Information about potential significant environmental impacts associated with transportation, delivery, use, end-of-life treatment and final disposal of its products and services may be provided II. It is desired that Environmental Friendly Materials, Systems and Processes are used with the lifecycle perspective to have minimal impact on the Environment while delivering the product/service
26 Requirements of ISO 45001:2018 Standard: The vendor/Supplier/ contractor shall ensure requirements with respect to ISO 45001:2018 standard guidelines clause A 8.1.4. This includes equipment’s, installations and materials are safe for use by workers as intended by ensuring: -equipment is delivered according to specification and tested to ensure it works as intended -installations are commissioned to ensure they function as designed -materials are delivered according to their specifications -any usage requirements, precautions or other protective measures are communicated and made available (E.g. Safety instructions, Hazard communication Symbols, SDS, Etc.)
27 Shelf life:- Where stores offered have a limited shelf-life, kindly indicate the life involved and confirm that in the event of an order from us, only newly manufactured stores with the maximum possible shelf-life at the time of dispatch will be offered for shipment. In respect of rubber items such as seals etc., having cure date, the item should not have been manufactured earlier than 6 months of dispatch.
28 Packing:- Each item / deliverable will have to be packed in such a manner as to avoid damage during transit, handling, etc., and damage /deterioration due to climatic conditions. Batch number and date of manufacture & identification details and handling instructions should be printed / written on labels of the deliverables.
29 Modification:- Modifications, updates, etc. done to the hardware, software or documentation related to the deliverables under the contract at any point of time during or after the validity of the contract shall be promptly intimated to HAL for ensuring that such changes are incorportaed in the products delivered under this contract as well.
30 Integrity Pact: (i) Integrity Pact (IP) as per HAL format enclosed shall be duly ink signed by the bidder along with the witnesses. Failure to sign Integrity Pact as per HAL’s standard format may lead to rejection of offer. In case of submission of offer through e-portal, scanned copy of the signed Integrity Pact also need to be submitted along with your offer and in parallel, the hard copy of original ink singed IP should reach HAL by post. The submission of Integrity Pact without deviation is a mandatory requirement (ii) It is requested to forward the original ink signed Integrity Pact in duplicate (as per HAL format enclosed with RFQ) duly initialled on each page to the following Contact Person and Address" Name: K Md Abdul Jaffer Sadiq, CM (IMM) Aircraft Research & Design Centre, Hindustan Aeronautics Limited, Marathahalli Post, Bangalore - 560037 Ph: 080 - 2232 4341 Fax: 080 - 2231 7132 E-mail: [email protected]
(iii)In respect of IP and its monitoring authority i.e. the Independent External Monitor (IEM), who is appointed by HAL, in line with the communication received from Central Vigilance Commission (CVC). The present IEM/s is/are: 1. Shri Gangaram Aloria, IAS (Retd.) Email id: [email protected] 2. Shri Sunil Kumar Bansal, IPS (Retd.) Email id: [email protected] 3. Shri Chaitanya Kumar Varma, CE&MES (Retd.) Email id: [email protected] Further, it may be noted that only integrity Pact related issues should be forwarded to IEM. For all other clarifications on specific tender related queries the undersigned officer of HAL need to be contacted. (iv) The bidder may approach the IEM nominated only for IP related issues. Any other specific clarifications/query/status with reference to tender and request for validity, extension of the tender etc., should be forwarded to concerned tender issuing HAL Officer. (v) Both Omnibus IP and Standalone IP formats are enclosed with RFQ/RFP. In case if Bidder has already signed Omnibus IP with any other Divisions of HAL and validity of the same exists for this contract period, then Bidder may forward the copy of the same. If Omnibus IP is not signed, then Bidder may choose to execute either of the IP formats i.e. Omnibus IP or Standalone IP.
i Please indicate approximate net weight of each of the item and gross weight and dimension of the package to enable HAL to determine the mode of dispatch.
ii Please indicate in your tender, whether stores newly manufactured are offered. Where newly manufactured stores are offered and on inspection it is found that reconditioned stores or parts have been used, such stores will be rejected at the contractor’s risk and expense.
iii Vendor should confirm that they are the original manufacturer of the stores referred to in this contract and has not engaged any individual or firm whether Indian or foreign whatsoever, to intercede, facilitate or in any way to recommend to the Government of India or any of its functionaries, whether officially or unofficially, the award of the contract to the seller nor has any amount been paid or intended to be paid to any such individual or intended to be paid to any firm in respect of any such intercession, facilitation or recommendation, vendor accepts that if it is established that the present declaration is in any way incorrect and if at any later stage it amount/commission to such individual/firm, vendor will be liable to pay the similar amount to HAL for engaging such individual/firm and making the payment as commission. In addition, vendor will also be debarred from entering into any supply contract with the Ministry of Defence, Government of India for a minimum period of 5 years. Vendors shall also consider cancellation of the contract without any entitlement or compensation to vendors who shall also be liable to refund all payments made by HAL in terms of the contract along with the interest at the London Inter-Bank Offer Rate (LIBOR).
iv The supplier should ensure that manufacturer batch no. is indicated on all the materials supplied.
v Vendor shall provide the information about potential significant Environmental impacts associated with transportation, delivery, use, end-of-life treatment and final disposal of the products and services.
vi It is desired that Environmental Friendly Materials, Systems and Processes are used with the life cycle perspective to have minimal impact on the Environment while delivering the product / service.
vii HAL reserves the right to cancel the tender without assigning any reasons thereof. The decision of HAL is final in this regard.
32 Language: All correspondence between the Parties, as well as all documentation, manuals, software listings and other writings, in connection with this Contract shall be in the English Language.
33 Bribes and Gifts: Any bribe, commission, gift or advantage given, promised or offered by or on behalf of the Vendor or his parties, agent or servant or any one on his or their behalf to any officer, servant, representative or agent of HAL or any person on his or their behalf in relation to the obtaining or to the execution of this or any other contract with HAL shall in addition to any criminal liability which the Vendor may incur, subject to the Vendor to the cancellation of this and all other contracts with HAL and also to payment of any loss or damage resulting from any such cancellation thereof. Any question or dispute as to the commission of any offence under the present clause shall be settled by HAL in such manner and on such evidence or information as they may think fit and sufficient and their decision shall be final and conclusive.
34 Appropriation: Whenever under this contract any sum of money is recoverable from any payable by the contractor, HAL shall be entitled to recover such sum by appropriating in part or whole by deducting any sum then due or which at any time thereafter may become due to the contractor in this or any other contract entered by HAL as a whole its Divisions and Branch Offices etc., held by him alone or in partnership with others. Should this sum be not sufficient to cover the full amount recoverable, the contractor shall pay to HAL on demand the remaining balance due.
35 Settlement of Disputes and Arbitration:- All disputes or differences whatsoever arising between the parties out of or relating to the construction, meaning and operation or effect of this Contract or the breach thereof shall be settled by Arbitration in accordance with the Rules of Arbitration of the Indian Council of Arbitration or International Centre for Alternative Dispute Resolution (ICA/ICADR) and the award made in pursuance thereof shall be binding on the parties. The provisions of the Arbitration and conciliation Act 1996 or any statutory modifications thereof shall apply to such legislation.
36 Applicable only for MSEs: The Micro, Small and Medium Enterprises Development (MSMED) Act, 2006 provides parties to a dispute (where one of the parties is a Micro or Small Enterprise) to be referred to Micro and Small Enterprises Facilitation Council if the dispute is regarding any amount due under Section 17 of the MSMED Act, 2006. If a Micro or Small Enterprise, being a party to dispute, refers to the provisions in MSMED Act 2006, these provisions shall prevail over the Indian Arbitration and Conciliation Act, 1996 and its statutory modifications thereof.
37 SHORT CLOSURE OF CONTRACT:- HAL reserves the right to short close this contract with three month prior notice to the vendor at any time during the tenure of the contract. The financial settlement entailed by such action shall be finalized based on the principle of equitable price adjustment and shall be based on discussions and mutual agreement.
38 Jurisdiction:-The competent Court at Bangalore, India shall only have Jurisdiction to deal with and decide any legal matter whatsoever arising on account of formulation or execution of this Contract.
39 Applicable Law:- The contract shall be governed by and interpreted in accordance with the laws of the Republic of India.
40 Non Assignment to third Party:Vendor shall not be entitled without HAL’s consent to assign or transfer to a third party all or part of the benefi ts or obligations under this contract.
41 Agent / Agency Commission:- The seller confirms and declares to the buyer that the seller is the original manufacturer or authorized distributor / stockiest of original manufacturer or Govt. Sponsored / Designated Export Agencies (applicable in case of countries where domestic laws do not permit direct export by OEMS) of the stores referred to in this offer / contract / Purchase order and has not engaged any individual or firm, whether Indian or Foreign whatsoever, to intercede, facilitate or in any way to recommend to Buyer or any of its functionaries, whether officially or unofficially, to the award of the contract / purchase order to the Seller; nor has any amount been paid, promised or intended to be paid to any such individual or firm in respect of any such intercession, facilitation or recommendation. The Seller agrees that if it is established at any time to the satisfaction of the Buyer that the present declaration is in any way incorrect or if at a later stage it is discovered by the Buyer that the Seller has engaged any such individual / firm, and paid or intended to pay any amount, gift, reward, fees, commission or consideration to such person, party, firm or institution, whether before or after the signing of this contract / purchase order, the Seller will be liable to refund that amount to the Buyer. The Seller will also be debarred from participating in any RFQ / Tender for new projects / program with Buyer for a minimum period of five years. The Buyer will also have a right to consider cancellation of the Contract / Purchase order either wholly or in part, without any entitlement or compensation to the Seller who shall in such event be liable to refund all payments made by the Buyer in terms of the Contract / Purchase order along with interest at the rate of 2% per annum above LIBOR (London Inter Bank Offer Rate) (for foreign vendors) and Base Rate of SBI (State Bank of India) plus 2% (for Indian vendors). The Buyer will also have the right to recover any such amount from any contracts /Purchase order concluded earlier with Buyer.
42 IMMUNITY TO GOVERNMENT OF INDIA:- It is understood and agreed that the Government of India is not a party to this agreement and has no liabilities, obligations or rights hereunder. It is expressly understood and agreed that HAL is an independent legal entity with power and authority to enter into contracts solely in its own behalf under the applicable Laws of India and General Principles of Contract Law. The vendor shall agree, acknowledge and understand that HAL is not an agent, representative or delegate of the Government of India. It is further understood and agreed that the Government of India is not and shall not be liable for any acts, omissions, commissions, breaches or other wrongs arising out of the contract. Accordingly, vendor expressly waives, releases and foregoes any and all actions or claims against the Government of India arising out of this contract, not to sue the Government of India as to any manner, claim, cause of action or thing whatsoever arising out of or under this agreement.
43 Fall Clause: i) The prices charged for the stores supplied under the contract by the Vendor shall in no event exceed the lowest price at which the Vendor sells the stores or offers to sell stores of essentially identical description or specification to any persons/organizations including the purchaser of any Department of the Government of India or any Department of the Indian State Governments or any Public undertaking of the Central or State Governments, as the case may be during the period till the performance of the supply order against the order/contract is completed. ii) If at any time during the said period, the Contractor reduces the sales prices, sells or offers to sell such stores to any person/organization as mentioned above at a price lower than the price chargeable under the present order/contract, the contractor shall notify HAL of such reduction/sale or offer of sale and the price payable under the present contract for the stores supplied after the date of coming into force of such reduction or sale or offer to sale shall stand correspondingly reduced.
44 EXIT CLAUSE Exit criteria: The contract/order may be terminated under the following circumstances: i. In the event of unsatisfactory performance by the Seller during the contract period, or any of the information provided by the Seller is found to be untrue, or Seller is found to have attempted to influence any person involved with the contract through unethical means, the contract shall be terminated with three month’s advance notice without any financial implication to Buyer. Notwithstanding the foregoing, in cases where it is found that a Seller has engaged in unethical practices, they shall be barred from participating in the future contracts with HAL for a period of three years. ii. If there is change in Buyer requirement, contract shall be terminated with three months' advance notice. The liability of Buyer in this case will be agreed mutually. In the event of termination of contract by either party, the Seller shall ensure the following: a) IPR’s are transferred to Buyer to enable Buyer to proceed on the work with other Seller. Seller also will render all assistance till the other Seller fully takes over the balance work. b) Transfer title and deliver all or any part thereof of the supplies, materials, work-inprogress, finished Products, Tooling, drawings and data produced or acquired by Seller specifically for the Product being terminated. c) Supply of products and its components / spares at least for a period of two years from the date of such termination. iii. The Seller is declared bankrupt or becomes insolvent. iv. The delivery of material is delayed due to causes of Force Majeure by more than six months). v. Based on the decision of the Arbitration Tribunal.
45 Termination for Default of Seller or for other reasons: HAL shall have the right to short close present Contract in part or in full by giving 1 month prior notice to the Supplier, in any of the following cases:- a) The work is delayed or cancelled for causes attributable to force majeure. b) The requirement is withdrawn by HAL’s Customer. c) The Supplier is declared bankrupt or becomes insolvent. d) It is noticed that the firm has utilized the services of any agent to get the resulting Order and paid any commission to such agent. e) As per decision of the Arbitration Tribunal f) In case any part of the Order is subcontracted by the Supplier without prior permission of HAL. g) If the performance of the Supplier is not found satisfactory during the execution of work. In any of the above stated case, no claim of damage etc., by the Supplier will be allowed.
46 Product Liability: Successful vendor needs to take sufficient insurance cover against the risks of product and civil liabilities in relation to equipment /product supplied by him. In the event of claims from any other party on any damages or deficient performance which are directly attributable to the vendor’s product, HAL would not be liable and would have the right to seek appropriate compensation from the vendor.
47 Export License: Vendors should categorically confirm the availability of export license from their government for exporting the system. Vendor shall be required to obtain and maintain all Export/Import licences and permits etc., as the case may be, required for performing supplies against this tender. Obtaining export licence shall be entire responsibility of the vendor.
48 Right of Sale and Utilization-ExportLicense/Reexport Permission:
48.i i. As the requirement is for Military/Civil application a specific confirmation from Bidders/Sellers on availability of export license from their respective Government should be provided and a copy of such relevant permission / license issued may be enclosed.
48.ii ii. Bidders /Suppliers shall be required to obtain and maintain all Export/Import licences and permits etc., as the case may be, required for performing supplies against this tender. Obtaining export licence and timely availability shall be entire/sole responsibility of the Bidders/Suppliers, which forms a part of obligations of the contract. However any unforeseen delay should be promptly informed to HAL with proper justification. If End user certificate is required from HAL, the format of the same may be enclosed with this offer.
48.iii iii. Bidders/Suppliers may indicate status of export permit based on the present rules/ regulations of their respective country and normal time frame for obtaining such export permission if an order is placed in near future and the said time frame should be covered within the delivery schedule indicated.
48.iv iv. Bidders/Suppliers should also confirm that necessary clearances are available from their Governmental authorities regarding the sharing of technical data required for integration purposes with other vendors of Aircraft /Helicopter on a need to know basis.
48.v v. Clearance in unequivocal terms also needs to be accorded regarding export of the equipment fitted as a part of the military and civil variant Aircraft /Helicopters, spare LRUs, modules & components and service support when such activities are undertaken by HAL India to other countries. Reservations if any may be specifically indicated as a part of the technical Bid.
48.vi vi. Thus Bidders/Suppliers to confirm that there are no restrictions for exporting HAL Aircraft/helicopters to any country, fitted with the LRU/Systems/items offered/supplied by them.
48.vii vii. Buyer will have exclusive worldwide sale and support right for all supplies under contract if specifically developed and funded by HAL. Any enquiry received on such equipment shall be directed to Buyer and Bidder/Seller will not directly sell / support / service without prior concurrence of Buyer. For all development orders all the Intellectual Proprietary Rights (IPR) will rest with Buyer.
48.viii viii. The prices to be quoted by Bidders/Sellers for exports should be competitive in international market scenario.
48.ix ix. In case of grant of Rights for Transfer of Technology (ToT) to Buyer for manufacture and/ or Repair and Overhaul (RoH), then Buyer will have exclusive rights for worldwide sale of the Aircraft / Helicopter incorporating the items/LRU Systems manufactured/ Repaired & Overhauled under ToT.
49 RISK PURCHASE: The Supplier will supply quality items as per approved sample and also the quantity intended by the concerned Division in full as per terms and conditions of respective orders. In case the Supplier fails to execute the order either in terms of quality or in quantity, HAL reserves the right to procure from elsewhere at the risk and cost of the Supplier and any extra expenditure incurred due to this purchase is payable by the Supplier.
50 Indemnity against Patent rights:- The successful bidder/Supplier shall defend, indemnify and hold HAL harmless from and against all actions, causes of action, liabilities, claims, suits, judgment, liens, awards, damages of any kind and nature whatsoever and expenses and costs of litigation to the extent such claims arise out of infringement of any IPR, patent, copyright, trademark or involve wrongful use of trade secret or confidential information or negligence attributable to the Supplier
51 Confidentiality:- For the purpose of this Tender / Contract / Agreement, the Bidder / Contractor / Supplier shall not store, copy or disclose HAL’s data and information whether in written, machine readable or other tangible form or disclosed orally, that is of value to HAL. Also, Bidder / Contractor / Supplier agrees to use HAL’s data only for the purpose under this Contract, restrict disclosure to any person or entity or third party and shall safeguard the provided data including from cyber security risks etc. Bidder / Contractor / Supplier should promptly return within 90 days HAL’s data in original media and should not keep HAL’s data, upon expiry of Tender / Contract / Agreement or early termination of Contract / Agreement and certify that HAL’s data has been deleted permanently. Non-adherence to this confidentiality clause by the Bidder / Contractor / Supplier shall be treated, as a material breach of this Tender / Contract / Agreement. The provisions of this clause shall survive and remain in force notwithstanding the termination or expiry of this Contract / Agreement.
52 INSOLVENCY: Supplier enters into liquidation, whether compulsory or voluntary (other than amalgamation or reconstruction with another party taking over all its rights as well as commitments) or becomes insolvent or suffers a receiver of the whole or part of its asset to be appointed, i) Shall forthwith notify the same to HAL and the HAL shall have the right without prejudice to his other rights or remedies to terminate the unexecuted part of this Contract. ii) In such an event, HAL shall become entitled forthwith to get the refund within 30 days of all the advance payments received by Supplier and expenditure incurred by as a part of its obligations under this contract it has not fulfilled. In such an event if applicable, Supplier is liable for return of any materials/items (including drawings, designs etc) to HAL, which are held at his end as a part of the obligations under this contract
53 PENALTY FOR USE OF UNDUE INFLUENCE :- Vendor undertakes that he has not given, offered or promised to give, directly or indirectly any gift, consideration, reward, commission, fees, brokerage or inducement to any person in service of HAL or otherwise in procuring the Contract or forbearing to do or for having done or forborne to do any act in relation to the obtaining or execution of the Contract or any other Contract with the Government for showing or forbearing to show favor or disfavor to any person in relation to the Contract with the Government. Any breach of the aforesaid undertaking by Vendor or any of its employees or anyone acting on its behalf (whether with or without the knowledge of Vendor) or the commission of any offence by Vendor or anyone employed by him or acting on its behalf, as defined in Chapter IX of the Indian Penal Code, 1860 or the prevention of Corruption Act, 1947 or any other Act enacted for the prevention of Corruption shall entitle HAL to cancel the Contract and all or any other contracts with the vendor and recover from the vendor the amount of any loss arising from such cancellation. A decision of HAL or its nominee to the effect that a breach of the undertaking has been committed shall be final and binding on Vendor. Giving or offering of any gift, bribe or inducement or any attempt to any such act on behalf of Vendor towards any officer/employee of HAL or to any other person in a position to influence the decision of HAL, directly or indirectly or any attempt to influence any officer/employee of HAL for showing any favor in relation to this or any other contract, shall render the Vendor to such liability/penalty as HAL may deem proper, including but not limited to termination of the Contract, imposition of penal damages, forfeiture of the Bank Guarantee and refund of the amounts paid by HAL
54.i a) Seller agrees that HAL shall be the sole owner of all intellectual property (IP) generated in the performance of this Contract by or on behalf of Seller with the aid of either funding and/ or technical inputs from HAL (hereinafter referred to as ‘Foreground IP’). If applicable and to the extent that seller sub-contracts performance of any part of the contract, the seller shall ensure that any Foreground IP arising from such work of its sub-contractor/s shall be assigned to HAL absolutely. Seller hereby assigns and agrees to assign all rights and interest in the Foreground IP to HAL. Seller shall share with HAL, all documentation necessary for HAL to exercise its rights to Foreground IP. If required by HAL, Seller shall assist HAL in registering the Foreground IP in favour of HAL.
54.ii b) Seller grants to HAL an irrevocable, non-exclusive, world-wide, royalty-free license to sell, offer for sale, use, execute, release, disclose, and distribute the developed supplies/ services/ products, which may contain Background IP. Background IP shall mean and include all pre-existing inventions and IP necessary for HAL to exercise its rights to Foreground IP.
54.iii c) Seller shall indemnify and protect at its own cost, HAL in respect of cost/ claims/ liabilities (including attorney’s fees and associated costs of legal proceedings) arising from any violation of Intellectual Property Rights of any third party with respect to supplies/ services provided by seller. If HAL or HAL’s customer/s are unable to put to use the supplies/services or a portion thereof as a result of violation of the Intellectual Property of any third party, Seller shall within reasonable time at seller’s own cost either, i. Procure for HAL and HAL’s customer/s the right to continue using the supply /service or, ii. Replace or modify the supplies/ services so that it becomes non-infringing or, iii. Compensate HAL the amount equivalent to the cost of supplies procured /to be procured, development cost already paid to seller and damages suffered by HAL arising due to inability to put to use the supplies/ services or a portion thereof.
54.iv d) In case the supplier receives a requirement/ request for supply or repair of deliverables of this contract directly from any third party including HAL’s customers, such request shall be forwarded to HAL. Intellectual property for the purpose of this clause includes inventions, discoveries and improvements; know-how, works of authorship, technical data, drawings, specification, process information, reports and documented information; and computer software (including without limitation, source code, object code, source code listings and object code listings that would enable the software to be reproduced or recreated), topology of integrated circuits, databases or any other such results of intellectual activity.
55 Conflict of Interest: Any bidder having a conflict of interest, which substantially affects fair competition, shall not be eligible to bid in this tender. Bids found to have a conflict of interest shall be rejected as nonresponsive. A bidder in this Tender Process shall be considered to have a conflict of interest if the bidder: a) directly or indirectly controls, is controlled by or is under common control with another Bidder; or b) receives or have received any direct or indirect subsidy/ financial stake from another bidder; or c) has the same legal representative as another bidder for purposes of this bid. A Principal can authorize only one representative, and the representative also should not represent or quote on behalf of more than one Principal. However, this shall not debar more than one Authorised distributor from quoting equipment manufactured by an Original Equipment Manufacturer (OEM), in procurements under Proprietary Article Certificate; or d) has a relationship with another bidder, directly or through common third parties, that puts it in a position to have access to information about or influence the bid of another Bidder or influence the decisions of the Procuring Entity regarding this Tender process; or participates in more than one bid in this tender process; or
e) Participation in any capacity by a Bidder (including the participation of a Bidder as sub-contractor in another bid or vice-versa) in more than one bid shall result in the disqualification of all bids in which he is a party. However, this does not limit the participation of a non-bidder firm as a sub-contractor in more than one bid; or f) would be providing goods, works, or non-consulting services resulting from or directly related to consulting services that it provided (or were provided by any affiliate that directly or indirectly controls,is controlled by, or is under common control with that firm), for the procurement planning (inter-alia preparation of feasibility/ cost estimates/ Detailed Project Report (DPR), design/ technical specifications, Terms of Reference (ToR)/ Activity Schedule/ schedule of requirements or the Tender Document etc.) of this Tender process; or g) has a close business or family relationship with a staff of the Procuring Organization who: i) are directly or indirectly involved in the preparation of the Tender document or specifications of the Tender Process, and/or the evaluation of bids; or ii) would be involved in the implementation or supervision of resulting Contract.
56 Non-conformities between Figures and Words: In case of non-conformities/errors are observed in responsive tenders between the quoted prices in figures and in words. This situation normally does not arise in case of e-Procurement. This should be taken care of in the manner indicated below: i) If, in the price structure quoted for the required goods, there is discrepancy between the unit price and total price (which is obtained by multiplying the unit price by the quantity), the unit price shall prevail and the total price corrected accordingly; ii) If there is an error in a total corresponding to the addition or subtraction of sub-totals, the sub-totals shall prevail and the total shall be corrected; and iii) If there is a discrepancy between words and figures, the amount in words shall prevail. Such a discrepancy in an offer should be conveyed to the bidder asking him to respond by a target date and if the bidder does not agree to HAL's observation, then the bid is liable to be rejected.
New Firm(Non Registered vendor): Indicate in your quotation, whether you are an Registered vendor of HAL and if so by which division of HAL. If you are not an registered vendor of HAL, submit the application for Registration by HAL by downloading application format from our website www.hal-india.co.in with necessary documents. Deemed Registration: Vendors registered in other Defense PSUs will be considered as Deemed Registered. This Deemed Registration will enable the vendors to participate in all future tenders of HAL for similar category of goods/services subject to fulfillment of other eligibility criteria indicated in the RFQ. However, prior to placing of order, in case the vendor is selected after following the due process/procedure, all the formalities relating to completion of regularization of the Registration Process as per the extant procedure of this will have to be completed.
57 The Bidder/s agrees to submit such document/s like submission of Integrity Pact / supporting additional documents ets., if requried or as called for in RFQ, subsequent to opening of the Bid and before finalizing the contract of PO, depending upon the then circumstances and decision of HAL. Any failure to submit such documents/s or Integrity Pact in HAL given format, shall amount to rejection of the Bid, which decision shall be at the discretion of HAL.
58 Any query related to tender (like due date extension, technical clarification, etc.) needs to be sent to HAL directly. The name and contact details of HAL personnel to whom queries related to tender to be sent are as below:- i) K Md Abdul Jaffer Sadiq, CM (IMM) Aircraft Research & Design Centre, Hindustan Aeronautics Limited, Marathahalli Post, Bangalore - 560037 Ph: 080 - 2232 4341 Fax: 080 - 2231 7132 E-mail: [email protected]
Hindustan Aeronautics Limited Aircraft Research & Design Centre, Design complex, Marathahalli Post, Bangalore 560 037
UNPRICE BID FORMAT The price figures should not be filled-in in the format. Vendor should only indicate ‘Quoted’/’Not Quoted’/’Not Applicable’ in the format and enclose the same along with the Technical bid of the tender.
Tender Ref. No.:D/IMM/COM3/5440/7R/2/1
Type of Bid: Two Bid System
Name of Work: Development and Supply of Indigenous Composite Prepreg (UD & BD)
Name of the Vendor/Firm
Quotation Ref. No.:
Sl.No. Item Description Qty UOM ‘Quoted’/’Not Quoted’/’Not Applicable'
DEVELOPMENT PHASE (Prices firm and fixed)
1 Composite Prepreg (BD)
Test specimen material - BD 75 Sq. Mtrs
Material for 1 UAV's 400 Sq. Mtrs
HW TESTING AT NABL ACCREDITED LABS BY VENDORS 1 Job
Sl.No. Item Description Qty UOM ‘Quoted’/’Not Quoted’/’Not Applicable'
2 Composite Prepreg (UD)
Test specimen material - UD 145 Sq. Mtrs
Material for 1 UAV's 850 Sq. Mtrs
HW TESTING AT NABL ACCREDITED LABS BY VENDORS 1 Job
SERIES PRODUCTION PHASE (on incurrence basis)
Sl.No. Item Description Qty UOM ‘Quoted’/’Not Quoted’/’Not Applicable'
3 Composite Prepreg (BD) 2028-29 8000 Sq. Mtrs
Sl.No. Item Description Qty UOM ‘Quoted’/’Not Quoted’/’Not Applicable'
4 Composite Prepreg (UD) 2028-29 17000 Sq. Mtrs
Hindustan Aeronautics Limited Aircraft Research & Design Centre, Design complex, Marathahalli Post, Bangalore 560 037
Commercial Bid (PRICE BID FORMAT)
Tender Ref. No.:D/IMM/COM3/5440/7R/2/1
Type of Bid: Two Bid System
Name of Work: Development and Supply of Indigenous Composite Prepreg (UD & BD)
Name of the Vendor/Firm
Quotation Ref. No.:
Sl.No. Item Description Qty UOM Unit Price (Excluding Taxes) Total (Basic Unit Cost X Qty.) HSN/SAC Code Applicable GST in % Total
A B C=A*B D E=C+(C*D%)
DEVELOPMENT PHASE (Prices firm and fixed)
1 Composite Prepreg (BD)
Test specimen material - BD (RC) 75 Sq. Mtrs ₹ 0 ₹ 0
Material for 1 UAV's (RC) 400 Sq. Mtrs ₹ 0 ₹ 0
HW TESTING AT NABL ACCREDITED LABS BY VENDORS (NRC) 1 Job ₹ 0 ₹ 0
Sub Total (NRC+RC) ₹ 0.00 ₹ 0.00
Sl.No. Item Description Qty UOM Unit Price (Excluding Taxes) Total (Basic Unit Cost X Qty.) HSN/SAC Code Applicable GST in % Total
A B C=A*B D E=C+(C*D%)
2 Composite Prepreg (UD)
Test specimen material - UD (RC) 145 Sq. Mtrs ₹ 0 ₹ 0
Material for 1 UAV's (RC) 850 Sq. Mtrs ₹ 0 ₹ 0
HW TESTING AT NABL ACCREDITED LABS BY VENDORS (NRC) 1 Job ₹ 0 ₹ 0
Sub Total (NRC+RC) ₹ 0.00 ₹ 0.00
I Total Development (RC +NRC) for Prepreg BD & UD (=1+2) ₹ 0 0.00
SERIES PRODUCTION PHASE (on incurrence basis)
Sl. No. Description Qty UoM Unit Price Extended Price in Rs. Applicable GST in % Total Estimation Rs.
A B C=A*B D E=C+(C*D%)
3 Composite Prepreg (BD) 2028-29 8000 Sq. Mtrs ₹ 0 ₹ 0
SUB TOTAL 40000 Sq. Mtrs ₹ 0.00 ₹ 0.00
Sl. No. Description Qty (Sqm) Unit Price Extended Price in Rs. Applicable GST in % Total Estimation Rs.
A B C=A*B D E=C+(C*D%)
4 Composite Prepreg (UD) 2028-29 17000 Sq. Mtrs ₹ 0 ₹ 0
SUB TOTAL 85000 Sq. Mtrs ₹ 0.00 ₹ 0.00
II TOTAL ESTIMATED COST FOR ANTICIPATED PRODUCTION REQUIREMENT : PREPREG (BD) + PREPREG (UD) (= 3+4) ₹ 0.00 ₹ 0.00
6 TOTAL PRICE FOR DEVELOPMENT PHASE AND ANTICIPATED PRODUCTION REQUIREMENT (=I + II) ₹ 0.00 ₹ 0.00
L-1 (Lowest Bid) will be decided based on Package wise basis and will be based on total value of Development Phase and Anticipated Production Requirement put together and inclusive of all Taxes and Duties (Landed Cost)
Note: Offer your compliance over following:
1) The Quantity Indicated above for Production Phase is only anticipated Quanity. In case of any change of actual requirement due to Change in HAL Customer requirement, shift in Production plan or for any other reasons, vendor shall agree for supplying the Increased/Decreased quanity at the above quoted unit price in the corresponding year.
2) The order for Production phase requirement will be placed separately by HAL Production Division after successful execution of Design and Development Phase and Receipt of firm order from our customer and at the discretion of HAL.
3) The Unit rates for the respective year to be quoted for Production Phase requirement.
4) In case, if the anticipated Quantities mentioned above are required beyond FY 2032-33, due to delay in placement of Order by HAL Production Division and also in case of requirement beyond RFQ qty Nos (if any in future) indicated, the Price will be regulated subjected to escalation as per price variation formula quoted at Clause No. 5 of Commercial Terms and Condition Annexure-2.
Specify the Import Content included in the quoted prices in terms of Foreign exchange as well as Indian Rupees
EXCHANGE RATE ADOPTED (Indicate Currency and Exchange Rate)
OTHER INFORMATION, IF ANY
Aircraft Research and Design Centre HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037. INDIA
TENDER: D/IMM/COM3/5440/7R/2/1
Name of Work: Development and Supply of Indigenous Composite Prepreg (UD & BD)
Name of the Vendor/ Firm:
Quotation Ref. No.:
S/N TENDER MANDATORY DOCUMENTS CHECKLIST YES/NO Any other comments
1 Are you an Indian ClassI/II Local supplier?
2 Have you uploaded necessary documents issued by GoI or any central/state/local Govt. body, supporting your claim as Indian supplier?
3 Are you eligible/qualified for purchase preference as per purchase preference policy ?
4 Whether the bidder is OEM.
If not OEM, then, please confirm the business understanding between the bidder and the OEM (like authorized dealer, channel partner, etc.). Copy of relevant authorization certificate must be submitted with their technical bid to prove the same.
5 Have you uploaded self certification & other necessary documents indicating you as a Class-I or Class-II local supplier, % of local content along with the details of the location(s) at which the local value addition is made? Note: In cases the quoted price is in excess of Rs.10 Crs (including duties, taxes and freight & Insurance), the 'Class-l & II local supplier' shall provide a certificate as per the format enclosed at Appendix-B(Type-II) from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in case of suppliers other than companies) indicating the percentage of local content along with the technical offer.
6 Are you a startup? An entity shall be considered as a Startup: i. Upto a period of ten years from the date of incorporation/ registration (Pvt Ltd, Partnership or LLP) ii. Turnover of the entity for any of the financial years since incorporation/ registration has not exceeded one hundred crore rupees. iii. Entity is working towards innovation, development or improvement of products or processes or services, or if it is a scalable business model with a high potential of employment generation or wealth creation. (An entity formed by splitting up or reconstruction of an existing business shall not be considered as a Startup)
If Yes, copy of the DPIIT (Dept. for Promotion of Industry and Internal Trade) recognition to be provided in the Technical Bid, else the bidder will not get the Purchase Preference applicable for Startup firms.
7 Whether the Bidder is MSE as per MSMED Act (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by SC/ST? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by Woman Enterpreneur? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Bidders who wants to avail privileges given to MSE vendors, should have UDYAM REGISTRATION CERTIFICATE- UAN. Copy of the Udyog Aadhar certification shall be submitted to consider such privileges to MSEs.
8 Have you attached GST registration certificate?
9 Have you attached your Address & contact details on which purchase order has to be issued?
10 Have you attached your bank details proof? (Bank mandate form dully authorized by bank officials / cancelled cheque)
11 Have you attached necessary Technical datasheet/ OEM literature/ product brochure/supporting documents? (if applicable)
12 All the bidders needs to mandatorily submit the compliance to all techncial specification as mentioned in Technical Bid
13 All the bidders needs to mandatorily submit the compliance to all commercial terms & conditions mentioned in Commercial Terms
14 Whether delivery lead time agreed as per HAL requirement
15 Whether validity of the offer provided as per RFQ.
16 Warranty:Whether warranty provided in offer as per RFQ.
17 Liquidated Damages: Whether Liquidated Damages agreed in offer as per RFQ
18 Payment terms:Whether payment terms agreed in offer as per RFQ
19 Whether delivery terms are "FOR HAL-ARDC".
20 Whether Vendor has declared Import Content
21 Whether Vendor has agreed for Performance Bank Guaranttee
22 Whether technical data RT Test Results provided for this RFQ has been tested at an NABL accredited lab.
Please fill the details in cells shaded with colour
Aircraft Research and Design Centre HINDUSTAN AERONAUTICS LIMITED Marathahalli Post Bangalore - 560 037. INDIA
TECHNICAL REQUIREMENT (PART OF TECHNICAL BID)
Tender Ref. No.: D/IMM/COM3/5440/7R/2/1
Type of Bid: Two Bid System
Name of Work: Development and Supply of Indigenous Composite Prepreg (UD & BD)
Name of the Vendor/ Firm:
Quotation Ref. No.:
PLEASE INDICATE YOUR REMARKS TO THE FOLLOWING ACTIVITY OF CHECK LIST AND UPLOAD IN E-PROCUREMENT PORTAL OF HAL AS PART OF YOUR QUOTATION
SL NO HAL REQUIREMENTS VENDOR COMPLIANCE (COMPLIANCE / NON COMPLIANCE)
I METHODOLOGY ADOPTED FOR DEVELOPMENT AND INDIGENISATION COMPOSITE PREPREG (UD & BD)
1 Issuance of RFQ by ARDC – HAL for procurement of Composite prepregs –UD & BD following two bid system consisting of following scope of work:
i Provide Hot Wet Test results
ii Supply of Qty. 75 SQM & 145 SQM of BD & UD Composite Prepreg respectively.
iii Supply of Qty. 400 SQM & 850 SQM of BD & UD Composite Prepreg respectively.
2 Bidders to submit their offers within the due date & time of the tender along with RT data tested at NABL accredited lab.
3 Initially Technical bids will be opened and the offers received will be evaluated in line with the guidelines stipulated in the RFQ.
4 Price bids of technically acceptable offers will be opened.
5 Order will be processed on technically acceptable lowest offer.
6 Upon placement of order, the vendor on whom order is placed has to submit Hot-Wet Test results for the offered Composite prepregs – UD & BD. Payment towards the same will be released by HAL.
7 The test results will be compared with the actual requirement of HAL. If the test results are not meeting HAL requirement, the PO will be short closed. If the test results are meeting the requirement, the vendor will be asked to supply Qty. 75 SQM & 145 SQM of BD & UD Composite Prepreg respectively. Upon acceptance of the same, payment towards the supply will be made to the vendor.
8 The Composite prepregs supplied will be used by HAL for carrying out Hot-Wet tests. The test results obtained by HAL will be compared with the test results provided by vendor. If there is major variation in the test results, HAL may take decision to short close the order. If there is no major variation, HAL will ask the vendor to supply Qty. 400 SQM & 850 SQM of BD & UD Composite Prepreg respectively. Upon acceptance of the same, payment towards the supply will be made to the vendor.
9 Qty. 400 SQM of BD & Qty. 850 SQM of UD which is supplied by the vendor, will be used for the preparation of Structural Test Specimen (STS). This STS will be subjected to Structural Test at the Ground Test Hangar, ARDC, HAL. On successful completion of the ground test flight trials will be carried out.
10 The UAV will be subjected to Flight trials and evaluation. Upon successful completion of testing of Prototypes, the UAV will enter production phase.
11 The division chosen for production of UAV’s will Place the order for the Composite prepregs – UD and BD with the vendor selected. It is assumed that about 100 UAV’s will be produced on successful testing of the prototypes.
II TIMELINE REQUIREMENT
A Introduction: HAL has initiated in-house design and development for UAV programs as per new DDPMAS. It is felt that use of indigenous composite prepreg material would meet the requirements of these projects. This RFQ is for Development and Supply of Indigenous Composite Prepreg (UD & BD) for 1 UAV which will be used for Structural Testing. On successful completion of the Flight Testing of the UAV’s, it is envisaged that there is a tentative requirement of 100 UAV’s from Customer.
B Table 1 – TIMELINES FOR THE ACTIVITIES:
Sl. No. Activity Date Remarks
1 Signing of agreement/placement of PO with vendor T0
2 The vendor shall conduct HW tests at any NABL accredited labs and present the test results & reports (1 batch) T0+08 Months Cost of the HW tests will be borne by HAL. HW tests include the standard tests like Tension, Compression, Inplane Shear, Interlaminar Shear, Flexure, Open hole Tension, Closed Hole Tension, Open hole compression, Closed Hole compression, Unnotched and Notched tests
3 Analysis of HW test results conducted by vendor T0+09 Months
4 Fabrication of test specimen, Conducting HW test by HAL at NABL accredited labs for RT, HW & CT condition. T0+17 Months SEE NOTE-F BELOW
5 Comparison of vendor test results with HAL test results & Cetrification of the material by CEMILAC T0+20 Months Important: See note 1 below.
6 Material required for One UAV to be supplied (Supply towards Design and Development) To+22 Months QPA : UD = 850 Sq.m & BD = 400 Sq.m
7 Preparation of STS, conducting GT and evaluation To+ 48 Months
8 Flight trials of UAV and evaluation To+ 60 Months SEE NOTE-2 BELOW
9 Placing order for production of UAV's To+ 60 Months onwards
NOTE-1 NOTE : In case, the test results of the vendor and HAL requirement are not matching, the technical team will deciced the future course of action
NOTE-2 After receipt of indigenous out-of-autoclave composite prepreg material from vendor, HAL, ARDC Division shall start the Manufacturing of airframe for structural testing. After successful structural testing, flight tests and trials of the UAV will be carried out. The production order will be issued by production division after the successful completion of flight testing. Vendor will have to supply prepregs for about 16 UAV's per annum after the start of production.
C PRE-QUALIFICATION CRITERIA: It can be specified that the vendor: • Should be a manufacturer of Prepreg and supplied to Defence/other industry • Should be a ISO 9001 / AS9100 certificate holder • Should have testing facilities with NABL accredition (or who have tie up with such a testing facility) • The RT test values to be provided by vendor along with price bid should be done at NABL accredited lab Bidders have to submit the relevant documents for meeting the above mandatory requirements Relaxation can be given to MSEs / Startups provided they have plant and facilities to manufacture prepregs.
D Change Management : Vendors should supply strictly conform to the order specification mentioned in Annexure 2 and 3. In case of change in product specifications due to non-conformity/ deviation/ Changes in production methods/change in vendor's suppliers etc prior approval of HAL has to be taken before despatch. Decision of HAL regarding acceptance of change is final.
E A video (10 to 15 minutes) showing the vendor's company profile,promoters,plant, testing facilities and other details of the company can be attached to the RFQ. During evaluation of the vendors the video will be seen by the committee.
F Test Specimen Qty.: The following quantity of composite prepreg for test specimen is needed. (a) 145 sq.m of UD (b) 75 sq.m of BD. HAL intends to purchase this quantity of prepreg for HW, CTD and RT testing
G QUALIFICATION: Qualification test schedule will be chalked out between ARDC, & Certifying Agency CEMILAC.The Prepreg Manufacturer will conduct the tests as per the test schedule. The results will have to be shared for further review and progress.
I TECHNICAL SPECIFICATION FOR 125°C CURE EPOXY RESIN IMPREGNATED STANDARD MODULUS CARBON FIBER FABRIC PREPREG (BD) FOR OUT-OF-AUTOCLAVE PROCESSING
This specification covers general requirements of carbon fiber Prepreg Woven Fabric prepreg with standard modulus(SM) carbon fiber and 125°C cure epoxy resin system for Out-of-Autoclave Processing. This specification is prepared keeping in view of the requirements of future UAV projects of HAL.
2 SPECIFICATION REQUIREMENTS OF RESIN SYSTEM
The candidate matrix is an epoxy resin system suitable for 80°C continuous service temperature. The formulated resin system shall be suitable for Out-of-Autoclave Processing. However, final acceptance of the values shall be as per design recommendations based on actual test values provided by the supplier(s).
The cured resin shall meet the following requirements:
Table 1: Processing and Thermal Properties of Neat Resin
Properties Property Requirements Unit Test Method
1 Cured Resin Density 1.2-1.3 gm/cm3 ASTM D 792
Thermal Properties
2 Glass Transition Temperature(Tg), Dry 140 (min) °C ASTM D 7028
3 Glass Transition Temperature(Tg), Wet 110 (min) °C ASTM D 7028
4 Gel Time @ 120°C 12(max) Minutes ASTM D 3532
5 Service Temperature Min 80 °C -
6 Cure Temperature 125+5 °C -
7 Post Cure Optional - -
Table 2: Mechanical Properties of Neat Resin (@Room Temperature)
1 Tensile Strength 65 (min) MPa ASTM D 639
2 Tensile Modulus 3.5 (min) GPa
3 Tensile Strain 2.5(max) %
4 Compression Strength(Yield) 90(min) MPa ASTM D 695
5 Flexural Strength 80 (min) MPa ASTM D 790
6 Flexural Modulus 2.2±0.07 GPa
7 Fracture Toughness, K1c * - Any standard test method
8 Strain Energy Release Rate, G1c * - Any standard test method
Supplier to determine the value and report.
a The properties of the resin system given here are the target values. The resin system shall be formulated such that the above requirements are met when tested as per test methods indicated.
b The preferred test method is indicated; however, the manufacturer can follow other equivalent test methods upon mutual agreement. The test report should indicate the test method followed against the values obtained.
3 SPECIFICATION REQUIREMENTS OF REINFORCEMENT
The candidate carbon fiber is a PAN based standard modulus in the form of 3K tow untwisted or never twisted. The fiber shall meet the following physical and mechanical performance requirements when tested as per the test standard mutually agreed, or the certificate of conformity from the fiber manufacture shall reveal that the requirements are met.
Table 3: Physical, Thermal and Mechanical Properties Requirements of Reinforcement
Properties Property Requirements Unit
General Requirements(Essential)
1 Reinforcement Carbon Fiber NA
2 Carbon Fiber Type Standard Modulus NA
3 Precursor PAN NA
4 Density 1.7-1.8 gm/cm3
5 Tow Count 3K Never twisted NA
6 Nominal Filament Diameter 5-7 Micron, μm
7 Carbon Content 94 (min) %
8 Sizing Epoxy Compatible -
Thermal Properties(Preferred)
10 Specific Heat 0.92 (min) j/g. °C
11 Thermal Conductivity 0.10 (min) J/cm.s.°C
12 Electric Resistivity 1.53x10-3 (min) Ohm-cm
Mechanical Properties Requirements (Essential)
13 Tensile Strength 4000(min) MPa
14 Tensile Modulus 220-240 GPa
15 Ultimate Failure(Tensile) Strain 1.8 (min) %
The reinforcing carbon fabric shall be produced from the carbon fiber meeting the requirements of section 3 above. The resulting fabric shall meet the various requirements given in Table 3. Final acceptance of the values shall be as per design recommendations based on actual test values provided by the supplier(s).
4 SPECIFICATION REQUIREMENTS OF REINFORCING WOVEN FABRIC
Table 4: Requirement of Reinforcing Woven Fabric
Description Requirement Unit Standard
1 Fabric Weave Style 4HS/5HS(Satin) NA -
5 SPECIFICATION REQUIREMENTS OF WOVEN FABRIC PREPREG SYSTEM
The BD prepreg produced using the matrix system specified in section 2 of this document and the reinforcement as specified in section 3 & 4, shall meet the following requirements and should be suitable for Out-of-Autoclave processing. However, final acceptance of the values shall be as per design recommendations based on actual test values provided by the supplier(s).
Table 5: Uncured Prepreg Physical and Thermal Properties and Life
Properties Property Requirements Unit Test Methods
1 Prepreg Areal Weight 400 ± 25 gm/m2 Any Agreed Method
2 Fiber Areal Weight 240±12 gm/m2 ASTM D 3776
3 Nominal Resin Content by Weight 40±3 % ASTM D 3529 / 3171
4 Volatile Content ≤ 2 % ASTM D 3530
5 Tack Level low to medium - -
6 Gel Time@120°C 12 (max.) minutes ASTM D 3532
Prepreg Storage and Handling Life
7 Shelf Life Min 12 months at -18°C - -
8 Out Life 30-60days at Room Temperature - -
9 Tack Life Min 30 days at Room Temperature - -
Table 6: Cured Prepreg Physical and Thermal Properties(Laminate)
1 Cured ply Thickness(CPT) 0.270+0.02 mm ASTM D 1777
2 Nominal Cured Laminate density 1.48+0.05 g/cm3 ASTM D 792
3 Normalized Fiber Volume 60 % -
4 Dry Glass Transition Temperature, Tg(DMA) 140 (min) °C ASTM D 7028
5 Wet Glass Transition Temperature, Tg(DMA) 110 (min) °C ASTM D 7028
6 Service Temperature Min 80 °C -
7 Cure Temperature 125+5 °C -
Table 7:Cured Prepreg Mechanical Properties @Room Temperature (Laminate)
1 Tensile Strength(Warp) 800 (min) MPa ASTM D 3039
2 Tensile Modulus(Warp) 60 (min) GPa
3 Tensile Strength(Weft) 700 (min) MPa
4 Tensile Modulus(Weft) 55 (min) GPa
5 Compression Strength (Warp) 650 (min) MPa ASTM D 3410
6 Compression Modulus(Warp) 55 (min) GPa
7 Compression Strength (Weft) 600 (min) MPa
8 Compression Modulus(Weft) 50 (min) GPa
9 Inter laminar Shear Strength(ILSS)/ Short Beam Shear Strength @ RT 65 (min) MPa ASTM D 2344
10 Flexural Strength 800 (min) MPa ASTM D 790
11 Flexural Modulus 50 (min) GPa
12 In-Plane Shear Strength 70 (min) MPa ASTM D 3518
13 In-Plane Shear Modulus 4.5 (min) GPa
a Database on available/contemporary Resin, Fiber and Prepreg in the market.
III TECHNICAL SPECIFICATION FOR 125°C CURE EPOXY RESIN IMPREGNATED STANDARD MODULUS CARBON FIBER PREPREG (UD) TAPE FOR OUT-OF-AUTOCLAVE PROCESSING
This specification covers general requirements of UD carbon fiber prepreg with standard modulus(SM) UD carbon fiber and 125°C cure epoxy resin system for Out of Autoclave processing. This specification is prepared keeping in view of the requirements of future UAV projects of HAL.
2 SPECIFICATION REQUIREMENTS OF RESIN SYSTEM
The candidate matrix shall be an epoxy resin system suitable for 80°C continuous service temperature. The formulated resin system shall be suitable for out of autoclave processing. However, final acceptance of the values shall be as per design recommendations based on actual test values provided by the supplier(s).
The cured resin shall meet the following requirements
Table 1: Processing and Thermal Properties of Neat Resin
Properties Property Requirements Unit Test Method
1 Cured Resin Density 1.2-1.3 gm/cm3 ASTM D 792
Thermal Properties
2 Glass Transition Temperature(Tg), Dry 140 (min) °C ASTM D 7028
3 Glass Transition Temperature(Tg), Wet 110 (min) °C ASTM D 7028
4 Gel Time @ 120°C 12(max) Minutes ASTM D 3532
5 Service Temperature Min 80 °C -
6 Cure Temperature 125+5 °C -
7 Post Cure Optional - -
Table 2: Mechanical Properties of Neat Resin (@Room Temperature)
1 Tensile Strength 65 (min) MPa ASTM D 639
2 Tensile Modulus 3.5 (min) GPa
3 Tensile Strain 2.5(max) %
4 Compression Strength(Yield) 90(min) MPa ASTM D 695
5 Flexural Strength 80 (min) MPa ASTM D 790
6 Flexural Modulus 2.2±0.07 GPa
7 Fracture Toughness, K1c * - Any standard test method
8 Strain Energy Release Rate, G1c * - Any standard test method
* Supplier to determine the value and report.
a The properties of the resin system given here at the target values. The resin system shall be formulated such that the above requirements are met when tested as per test methods indicated.
b The preferred test method is indicated; however, the manufacturer can follow other equivalent test methods upon mutual agreement. The test report should indicate the test method followed against the values obtained.
3 SPECIFICATION REQUIREMENTS OF REINFORCEMENT
The candidate carbon fiber is a PAN based standard modulus fiber in the form of 12K tow untwisted or never twisted. The fiber shall meet the following physical and mechanical performance requirements when tested as per the test standard mutually agreed or the certificate of conformity from the fiber manufacture shall reveal that the requirements are met.
Table 3: Physical, Thermal and Mechanical Properties Requirements of Reinforcement
Properties Property Requirements Unit
General Requirements(Essential)
1 Reinforcement Carbon Fiber NA
2 Carbon Fiber Type Standard Modulus NA
3 Precursor PAN NA
4 Density 1.7-1.8 gm/cm3
5 Tow Count 12K Never Twisted NA
6 Nominal Filament Diameter 5-7 Micron, μm
7 Carbon Content 94 (min) %
8 Sizing Epoxy Compatible -
Thermal Properties(Preferred)
10 Specific Heat 0.92 (min) j/g. °C
11 Thermal Conductivity 0.10 (min) J/cm.s.°C
12 Electric Resistivity 1.53x10-3 (min) Ohm-cm
Mechanical Properties Requirements(Essential)
13 Tensile Strength 4500(min) Mpa
14 Tensile Modulus 220-240 Gpa
15 Ultimate Failure(Tensile) Strain 1.8 (min) %
4 SPECIFICATION REQUIREMENTS OF UD PREPREG SYSTEM
The UD prepreg produced using the matrix system specified in section 2 and the reinforcement as specified in section 3 shall meet the following requirements and should be suitable for Out- of- Autoclave processing. However, final acceptance of the values shall be as per design recommendations based on actual test values provided by the supplier(s).
Table 4 : Uncured Prepreg Physical and Thermal Properties and Life
Properties Property Requirements Unit Test Methods
1 Prepreg Area Weight 200±12 gm/cm2 Any Agreed Method
2 Fiber Areal Weight 134 ± 6 gm/cm3 ASTM D 3776
3 Resin Content (by Weight) 33±3 % ASTM D 3529/ 3171
4 Volatile Content ≤ 2 % ASTM D 3530
5 Tack Level low to Medium - -
6 Gel Time@120°C 12 (max.) minutes ASTM D 3532
Prepreg Storage and Handling Life
7 Shelf Life Min 12 months at -18°C - -
8 Out Life 30-60 days at Room Temperature - -
9 Tack Life Min 30 days at Room Temperature - -
Table 5 : Cured Prepreg Physical and Thermal Properties(Laminate)
1 Cured Ply Thickness(CPT) 0.15±0.02 mm ASTM D 1777
2 Nominal Cured Laminate density 1.48+0.05 g/cm3 ASTM D 792
3 Normalised Fiber Volume 60 % -
4 Dry Glass Transition Temperature, Tg(DMA) 140 (min) °C ASTM D 7028
5 Wet Glass Transition Temperature, Tg(DMA) 110 (min) °C ASTM D 7028
6 Service Temperature 80 (min) °C -
7 Cure Temperature 125+5 °C -
Table 6:Cured Prepreg Mechanical Properties @Room Temperature (Laminate)
1 0° Tensile Strength 2000 (min) MPa ASTM D 3039
2 0°Tensile Modulus 130 (min) GPa
3 90°Tensile Strength 65 (min) MPa
4 90°Tensile Modulus 9 (min) GPa
5 0°Compression Strength 1200 (min) MPa ASTM D 3410
6 0°Compression Modulus 110 (min) GPa
7 90° Compression Strength 80 (min) MPa
8 90° Compression Modulus 8 (min) GPa
9 Inter laminar Shear Strength(ILSS)/ Short Beam Shear Strength @ RT 80 (min) MPa ASTM D 2344
10 Flexural Strength 1500 (min) MPa ASTM D 790
11 Flexural Modulus 120 (min) GPa
12 In-Plane Shear Strength (+45°) 100 (min) MPa ASTM D 3518
13 In-Plane Shear Modulus (+45°) 4.5 (min) GPa
a Database on available/contemporary Resin, Fiber and Prepreg in the market
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
MAINRFQ54407R2.pdf
TENDER_DOCUMENT • 0.26 MB
BD_TECH_SPECIFICATION_APPENDIX01.pdf
TENDER_DOCUMENT • 5.75 MB
UD_TECH_SPECIFICATION_APPENDIX02.pdf
TENDER_DOCUMENT • 5.95 MB
CommTermsAnnexure2.pdf
TENDER_DOCUMENT • 0.37 MB
PriceBidAnnexure3.pdf
TENDER_DOCUMENT • 0.19 MB
NDAHAL.pdf
TENDER_DOCUMENT • 0.17 MB
CheckListAnnexure5.pdf
TENDER_DOCUMENT • 0.02 MB
SDFORMAT.pdf
TENDER_DOCUMENT • 0.04 MB
TechTermsAnnexure1.pdf
TENDER_DOCUMENT • 0.41 MB
Appendix_A.pdf
TENDER_DOCUMENT • 0.10 MB
UNPriceBidAnnexure4.pdf
TENDER_DOCUMENT • 0.06 MB
Standalone_IP.pdf
TENDER_DOCUMENT • 0.23 MB
Omnibus_IP.pdf
TENDER_DOCUMENT • 0.22 MB
AppendixAxlsm.xlsm
TENDER_DOCUMENT • 0.02 MB
FormatBannedCertificate.pdf
TENDER_DOCUMENT • 0.08 MB
CommTermsAnnexure2xlsm.xlsm
TENDER_DOCUMENT • 0.04 MB
UNPriceBidAnnexure4xlsm.xlsm
TENDER_DOCUMENT • 0.02 MB
DeclarationCertificateLIIA.pdf
TENDER_DOCUMENT • 0.34 MB
PriceBidAnnexure3xlsm.xlsm
TENDER_DOCUMENT • 0.02 MB
CheckListAnnexure5xlsm.xlsm
TENDER_DOCUMENT • 0.02 MB
TechTermsAnnexure1xlsm.xlsm
TENDER_DOCUMENT • 0.03 MB
LCPPPFormat.pdf
TENDER_DOCUMENT • 0.21 MB
DeclarationCertificateIIC.pdf
TENDER_DOCUMENT • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .