SPECIAL REPAIRS TO BLDG NO 40 OR MD ACCN AT 299 AREA AND PROVN OF 05 X OVERHEAD WATER TANK OF 1000 LITRES AT 5 X TRG LOC AT GUARDS RC KAMPTEE

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash brick curved on plan exc 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 2 above but half brick wall in CM (1:4) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including dismantling of ceiling fan, tube light, cable and refixing at same place cover fillets complete all as specified and directed.

M&L for providing and fixing snap grid for false ceiling non asbestos board of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel section @ 90grams/sqm, both side inclusive) consisting main ''T'' runner with suitably spaced joints to get required length and of size 24mmx38mm made from 0.25mm thick (minimum) sheet, spaced at 1200mm centre to centre and cross ''T'' of size 24mmx25mmx1200mm made of 0.25mm thick (minimum) sheet,1200mm long spaced between main spaced between main ''T'' at 600mm centre to centre to from a grid of 1200x600mm and secondary cross ''T'' of length 600mm and size 24mmx25mmx600mm made of 0.25mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.4mm including, required cutting/making, opening for services like diffusers, grills light fittings, fixtures , smoke detectors etc, Maint ''T'' runners to be suspended from ceiling using slotted cleats of size 27x37x25x1.0mm fixed to ceiling.4mm GI adjustable rods with galvansied butterfly level clips of size 85x30x0.5mm spaced at 1200mm centre to centre along main T , bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specification, complete all as specified and directed. Make:- Everest or equivalent

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework fixed in ceiling flat or sloping complete all as specified and directed.

M&L for mild steel work in wind tie/hold fasts or similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness complete all as specified and directed.

M&L for 75mm thick Cement concrete (1:3:6), type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection with fair finished complete all as specified and directed. Note: Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand (1:3) by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

M&L for providing cement concrete type C-1, (1:3:6) (20mm graded crushed stone aggregate) in surface channel & drain including necessary formwork etc complete all as specified and directed.

M&L for 75mm thick PCC Cement concrete type D- 2, (1:4:8) (using 40mm graded crushed stone aggregate) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L for coloured non skid digital ceramic joint less tiles 8 to 10 mm thick (square/rectangular) are of each tile exc 0.18 Sqm but not exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM (1:4) complete all as specified and directed.

M & L for coloured non skid digital ceramic joint less tiles 7 to 10 mm thick (square/rectangular) are of each tile exc 0.18 Sqm but not exc. 0.38 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement for dado/skirting to match over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M & L for coloured non skid ceramic joint less tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM (1:4) complete all as specified and directed.

M&L for coloured/ printed glazed ceramic tiles 300x450x6 to 7mm thick, in /walls skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM (1:4) complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in laid bedded and pointed in any mortar floors, aprons etc and disposal of rubbish outside of MD land complete all as specified and directed.

S&F Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for machine cut Cudapph stone slab on cooking platform/shelf 20-25mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for Machine cut Kota stone slab flooring 18-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over screed bed or bedding layer of mortar 20mm thick cement Mortar (1:3) complete all as specified and directed.

M & L for Kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 10mm thick rendering in cement mortar (1:3), on fair faces of brick work or concrete surfaces as backing complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

S&F factory made kiln seasoned chemical treated 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), complete all as specified and directed.

S&F factory made 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides face is covered with both side decorative face veneer with lapping/frame to match complete all as specified and directed.

S&F Factory made skeleton panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, complete all as specified and directed.

S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F anodized aluminium windows and ventilator shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, locking arrangement etc complete all as specified and directed.

S&F framed work such as grills, door frame etc with ends of bars shouldered and or reverted or forged into spikes, framed guard bars and similar work conforming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exc 0.50 Sqm each pane complete all as specified and directed.

S&F 100mm long stainless steel butt hinges. heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12mm dia fixed complete all as specified and directed.

S&F 250 mm long Aluminium sliding door bolts, bolt type bolt 16 mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 200mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S&F mild steel Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and directed.

S&F repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F piano hinges, mild steel, bright finish or elctro galvanised and width of flaps size 40mm complete all as specified and directed.

S&F in repair 15mm bore galvanized steel tubes concealed, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges and cutting chases for concealed water tubing or concealed etc complete all as specified and directed.

S&F in repair 20mm bore galvanized steel tubes concealed, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges and cutting chases for concealed water tubing or concealed etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F in repair Rotational moulded (three layers, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes as specified in SSR Part I complete all as specified and directed.

S&F in repair Rotational moulded (three layers, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes as specified in SSR Part I complete all as specified and directed.

S&F in repair 20mm PTMT float valve, high pressure with Polythene float and fly nut complete, screwed for Iron pipe etc complete all as specified and directed.

S&F in repair gun metal gate valve of 15 mm dia with iron wheel screwed both for iron pipe complete all as specified and directed.

S&F in repair gun metal gate valve of 20 mm dia with iron wheel screwed both for iron pipe complete all as specified and directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule ccomplete all as specified and directed.

S&F 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule ccomplete all as specified and directed.

S&F in repair 15mm bore angle stop valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore concealed stop valves fancy type chromium plated cast copper alloy pressure with crutch or butter fly handles screwed both ends with long shank and cup (concealed type)for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore pillar taps swan neck cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F in repair 200mmx200mm chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges chromium plated complete all as specified and directed.

S&F in repair white wall mounted bathroom cabinet mirror approx 18"x14" complete all as specified and directed.

S&F vitreous China squatting pan 'Orissa' pattern, size 580x440mm white, with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

S&F in repair PVC low level flushing cistern white slimline 10 ltrs capacity including PVC bend pipe, handle and float valve , brackets etc complete all as specified and directed.

S&F in repairs Vitreous China W.H.B. white flat back of size 550 x 400 mm, including pvc waste pipe, and brackets or wall hung fixed with bolts etc complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm long suitable for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair waste coupling chromium plated size 32 mm with long thread complete all as specified and directed.

S&F in repair stainless steel drapery curtain rods with brackets/holders etc 25mm bore cut to length as required complete all as specified and directed.

S&F stainless steel pegset 6 nos hook (Make-Plumber, Parryware & Prayag) complete all as specified and directed.

S&F in repair stainless steel Kitchen plate racks size 24x30x10 inch (Make-Plumber, Parryware & Prayag) complete all as specified and directed.

Taking down eves gutter, gas pipe, sewage pipe and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan-necks etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings the accessories) complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches 110 mm bore complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches 40 mm bore complete all as specified and directed.

S&F PVC (SWR) bend, ISI marked, any radius of 110mm bore complete all as specified and directed.

S&F cast iron floor trap with grating 100 mm dia including jointing to waste pipe fixed in PCC type B-I , 1:2:4 etc complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal. Make : Finolex/ Kisan/ Supreme/ Prince complete all as specified and directed.

S&F PVC (SWR) vent cowl ISI marked 110mm bore complete all as specified and directed. Make : Finolex/ Kisan/ Supreme/ Prince complete all as specified and directed.

Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing decorated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiselling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layer in CM (1:3) mixed with water proofing compound as per manufacturer's instructions by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on minerals/slate finished membrane over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane having non woven. polyester film reinforcement with 3mm thick and weight not less than 3.00 kg/sqm and finished on top with mineral/slate finished torch on system laid with 100mm & 150mm over lap on side & end laps respectably complete all as per manufacturers compound complete all as specified and directed. Note:- WPTT shall be done by authorized applicator and guarantee money & certificate shall be provided for 10 years by tenderer.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, (1:3) by weight, 8cm x 8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished, bright finished complete all as specified and directed.

Taking down cement plaster on brick/stone walls etc including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar (1:6) on walls, surface finished even & smooth without using extra cement etc complete all as specified and directed.

M&L for 15mm thick rendering in two layers (first coat 10mm thick in cement mortar (1:6) and second 5mm thick in cement mortar (1:4) on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with and mixed with liquid water proofing compound as per manufacturers' instruction surface finished fair and even complete all as specified and directed. (Note:- Liquid water proofing compound will be measured and paid separately)

S& F glass fibre mesh not less than 100 GSM wherever required complete all as specified and directed.

M&L for preparation new plaster surfaces and two coats of oil emulsion distemper (acrylic) white or tinted or any colour including preparation of over one coat of putty surface of walls complete all as specified and directed.

M & L for complete removal of existing treatment of wall/ceiling and applying two coats of oil emulsion distemper (acrylic) white or tinted or any colour including preparation of over one coat of putty surface on wall etc. complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of cement base paint on wall over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surface / complete removal of existing treatment incl washing rubbing down painted surfaces and applying two coat of cement base paint on wall over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling with complete removal of existing treatment incl washing rubbing down painted surfaces and applying three coat of white wash complete all as specified and directed.

M&L for two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or girth over one coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint over old painted wooden surfaces of any description over 10 cm in width or girth including preparation or surfaces complete all as specified and directed.

M&L for two coat of synthetic enamel painting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and directed.

M&L for two coat of synthetic enamel painting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and directed.

M & L for preparation of old steel surfaces of any description over 10 cm width or girth & applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for Precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM (1:6) complete all as specified and directed.

M&L for mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for RCC M-25 design mix (using 20 mm graded stone aggregate.) in grade slab/roof beam complete all as specified and directed.

S&F angle iron frame work for placing of sheet/desert cooler etc including flat iron and all necessary drilling, welding, bolting or riveting, embedding in concrete etc. and similar work and fixing to the required location and position including shape and size conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 18 to 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 15mm thick screed bed or bedding of cement plaster (1:4) with water proofing compound for sunken floor treatment finishing even and smooth without using extra cement complete all as specified and directed. (Note: WPC will be paid separately).

M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

M&L for cement concrete Type B2 (1:2:4) (20mm graded aggregate) in sunken floor complete all as specified and directed.

M & L for chequered cement concrete tiles colour glossy finished rubber pressed 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar (1:6) complete all as specified and directed.

Removing building materials to a distance of 100m or under, beyond the lead incl in the rates including loading, unloading and stacking at the destination complete all as specified and directed.

S&F 18mm thick PVC boarding as in kitchen cupboard/shelf incl all accessories complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Taking out existing unserviceable wooden wardrobe including chowkhat of overall size 1000mm x 1900mm approx from existing position of married & single accn including supply & fixing steel wardrobe including chowkhat of same size at the same position in Md and single accn all as directed to ensure proper & smooth functioning of wardrobe to the entire satisfaction of Engr-in-Charge. The overall outer size of chowkhat will be 1000mm X 1900 mm approx, made with 0.5mm thick plain black MS sheets and overall shutter size of wardrobe 945mm X 1845mm (approximate) having 2 shutter, 06 Nos of 75mm long, medium weight, MS butt hinges and one number approved quality chromium plated MS handle & one number MS lock of approved quality CP of Godrej pattern with key in duplicate. Thickness of all MS sheets to be used in wardrobe for any purposes including chowkhat, shutter, bracing and back etc except shelves shall be of 0.5mm thick and 02 numbers shelves of size 1.00 x 0.5m approx made of 1mm MS sheet shall be fixed suitably and properly with rivet / welds for storing clothes etc in wardrobe. 01 No MS approved pattern tie hanger shall be fixed in one shutter. One number MS peg set of three shall be fixed in other shutter of wardrobe. 18mm dia MS conduit pipe chromium plated with suitable & approved quality bracket will be fixed to both gable wall of wardrobe. Suitable pattern MS sheets bracing to shelves and shutters shall be provided to avoid any sagging and other related problem in smooth functioning and proper use of wardrobe. All cement plaster, brick wall, PCC, RCC etc disturbed during dismantling of wardrobe shall be made good in cement motar 1:3 properly as per site condition and technical requirement all as directed by Engr-in-Charge. In the bottom portion of wardrobe (of size 1.0 x 0.60m approx) 7mm thick glazed tile exc 0.06 sqm and not exc 0.11 sqm of approved colour and shade shall be laid over and including screed bed of 15mm thick in CM 1:6 including filling the joint with matching colour of tiles. In the sides (of size 0.58 x 1.88m approx each) and back portion of wardrobe (of size 1.0 x 1.88 m approx) 350x450x7mm thick glazed tile of approved colour and shade shall be fixed over and including backing coat of 10mm thick in CM 1:4 including filling the joint with matching colour of tiles. Inside surface of ceiling of wardrobe (of size 1.00x0.60m approx) shall be finished with two coats of OBD over a coat of birla white wall care putty after making good surface properly. Chowkhat will be fixed with suitable rawl plug with and CP steel screw inside wall etc & adjacent surfaces shall be made good to match with adjacent finishing surfaces properly as required and directed for entire completion of work. All steel surface will be painted with two coats of synthetic enamel paint with approved shade and colour by spray painting over one coat of red oxide primer including preparation of surfaces. All other misc work will also be carried out for entire completion and smooth functioning complete all as specified and directed.

S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30 mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drewing shown on SSR complete all as specified and directed.

S&F 4mm thick Figured/tinted glass, pin head type and glazing in squares exc 0.5 sqm in each pane including all accessories complete all as specified and directed.

S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L for providing and fixing stainless steel railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for rolled mild steel sections confirming to Fe 290 Gde E-165 as in fencing pole or other similar work complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to distance not exc 50m and making good surface in hard/dense soil complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

S&F Rotational moulded (three layers, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes as specified in SSR Part I complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.

S&F 20mm bore gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 15mm bore gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 15mm bore galvanised steel tubes, concealed, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors, cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing etc complete all as specified and directed.

S&F 20mm bore galvanised steel tubes, concealed, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors, cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing etc complete all as specified and directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 126 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 126 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 126 above but one 3 pin 5 amp socket out point on the independent board with other switches complete all as specified and directed.

All as per item No 126 above but one bell / buzzer point complete all as specified and directed.

All as per item No 126 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note :- (i) Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. (ii) 1x4 Sqmm + 2x4 Sqmm wire + 1 Run PVC conduit pipe shall be measured in one unit RM.

S&F for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F ceiling rose surface type 3 terminal 5 amps complete all as specified and directed.

S&F electric bell ding dong AC 230V single phase complete all as specified and directed.

S&F bell push switch modular type single pole one way 5 amp 240 volts complete all as specified and directed.

S&F 4 step 2 module modular type electronic regulators for ceiling fan 1200/1400mm sweep, 240 volts, 120 watt single pole complete all as specified and directed.

S&F 18-22 Watt LED tube light fittings complete with aluminum body including tube rod, dirver with not less than 2000 Lumen O/P and l/p rated voltage 240 V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make & Model : Philips Astra Line CG LDC-20-CDL/ PHilips / Wipro / Crompton

S&F lamp holder insulated body with back plate for angle / batten fitting complete all as specified and directed.

S&F LED light fitting 10W bulk head luminaires with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable of suitable size of 230V 50Hz complete all as specified and directed. Make: Bajaj Cat No BIBWP 10W / CG Cat No LBHP 10 CDL / Wipro / Philips / Surya

S&F building security light LED 25 W with lumen efficacy of 100 lumen/watt with driver with rated cvoltage 240 V, 50Hz, including mounting GI (made out of 25mm dia grade pipe 0.8 m bent two shape including FI clamps nout bolts etc complete all as specified and directed. Make : CG LSTS-25-CDL/Philips/Wipro

S&F exhaust fan metallic body 300mm sweep single phase, 230 volts 50Hz with nut and bolts washers etc and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose and making holes complete all a sspecified and directed.

S&F MCCB TPN 63 amps 415 volts 50Hz 16KA connecting with incomer cable using suitable size lugs as required and connection to main DB using 10 sqmm x 4 FRLSH copper conductor complete all as specified and directed.

S&F MCCB enclosure suitable for MCCB 63A, made out of CRCA sheet complete with all connection complete all as specified and directed.

S&F MCB single pole & neutral 240 volt 6 to 40 amps 10 KA complete all as specified and directed. Make :- Legrand / Havells /L&T

S&F MCB triple pole & neutral 415 volt 40 to 63 amps 16 KA breaking capacity complete all as specified and directed. Make :- Legrand / Havells /L&T

S&F energy meter enclosure made of bakellite material with fixing of meter and testing complete all as specified and directed. Make:- Hensel / Ship / HPL

S&F wooden board of suitable size fix on wall for installation of 4 energy meter with fixing of meters, making connections complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make :- Legrand / Havells /L&T

S&F MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:- Legrand / Havells / L&T

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete (1:2:4) type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.76,032.00]

M/s Shrangi Rishi Construction

chronicle enterprises

NORTH INDIA PEST CONTROL

M/s Rahul Traders

M/s T.S.JOHAR

Bidder Name

M/s Shrangi Rishi Construction

chronicle enterprises

M/s B S Jain

M/s Rahul Traders

NORTH INDIA PEST CONTROL

M/s T.S.JOHAR