Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.7 LAccepted-AOC 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹43.8 L+₹6.3 L (16.9%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹44.7 L+₹7.2 L (19.2%)Rejected-Finance 32 FATEH ENCLAVE OFFICERS ENCLAVE PHASE II PATIALA 147001 PB | PATIALA | PATIALA | PUNJAB | 147001 | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
5 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT. COL. SANDEEP KUMAR
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
COMPREHENSIVE MAINTENANCE FOR NEW MAP BLOCK NO P-119 TO P-142 UNDER AGE B/R-II GE NORTH PATIALA AT PATIALA MILITARY STATION
2023_MES_617889_1
GE(N)/TOKEN-68/2023-2024
Open Tender
Civil Works
Item Rate
240 days
PATIALA
AS PER NIT
9 documents required · 9 mandatory
₹500
GE NORTH PATIALA
₹90,000
Yes
21 Dec 2023
8 Sept 2023
12 Oct 2023
8 Sept 2023
5 Oct 2023
22 Sept 2023
Amount
Taking down chowkhats or frames n.exc 1.5 sqm each (without taking off shutter from the frame) and removing from the site including dismantling brick work of hold fasts complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each (without taking off shutter from the frame) and removing from the site including dismantling brick work of hold fasts etc complete all as specified and directed by Engineer-in-Charge.
Taking down Shutters exc 1Sqm but n exc 2 Sqm each and refixing in the same opening all as specified.
Factory made Pressed steel frames, confirming to IS, having profile 125 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary lugs,, lock strike plate, etc. and fixing only 100 mm size hinges with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge. Note: Mild Steel butt hinges shall be measured and paid separately as supply only under relevant item.
Factory made Pressed steel frames, confirming to IS, having profile 105 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary lugs, lock strike plate, etc. and fixing only 100 mm size hinges,, with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge. Note: Mild Steel butt hinges shall be measured and paid separately as supply only under relevant item.
Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and removing from the site complete all as specified and directed by Engineer-in-Charge.
Demolition of Cement concrete unreinforced as in Ground Floor,paving n. exc. 15cm thick (above or below G.L.) of any description and in any position not otherwise specifically provided for complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge.
Supply & Fix in repairs 100 dia CI bends, diminishing pieces or tapers complete all as specified and directed by Engineer-in-Charge.
All as per Item No 8 here in before but 75mm dia complete all as specified and directed by Engineer-in-Charge.
S&F CI bend (any radius) with ovall access door of 75mm bore in repair complete all as specified and directed by Engineer-in-Charge.
S&F CI bend/ tees of any radius for 100 mm bore with access door as in repair complete all as specified and directed by Engineer-in-Charge.
Supply & Fix in repairs CI Floor trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) etc fixed in repairs.as specified and directed
Supply & Fix 75mm cast iron vent cowls complete all as specified and directed by Engineer-in-Charge.
Supply & Fix branch pieces, 100mm dia, single (equal or unequal), ordinary of inverted (spigot or socket type) or with parallel branches as specified and directed
Special type cast iron P or S trap 300mm to 450mm long tail suitable for 100mm dia CI pipe incl jointing to waste pipe in run lead fixed as in repair complete all as specified and directed
Cast iron diminishing pieces or tapers of size of 100mm with run lead joints complete all as specified and directed
Demolition of brick work built in cement mortar incl all quions arches, pillar or any other description etc complete all as specified and directed by Engineer-in-Charge.
Brick work with sub class 'B' bricks(using old bricks retrived from item no. 17, class designation 150, old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
Factory made Steel windows or ventilators, fixed type, with glazing bars with one shop coat of zinc chromate primer, complete all as shown on drawings
Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq. mtr in each pane, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Block boards, grade 2 quality, 18/19 mm thick interior grade, plain board, fixed with screws over and including fabrication of suitable timber frame work complete all as specified and directed by Engineer-in-Charge.
S&F Decorative laminate 0.90mm type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions® complete all as specified and directed by Engineer-in-Charge.
M&L for lipping over block board or veneered particle board with external teak wood,6mm thick fixed with nails complete all as specified and directed by Engineer-in-Charge.
Material and labour PCC 1:3:6 type C-2 (40 mm graded mechanically crushed stone aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
Plain cement concrete (1:3:6) type C-1,using 20 mm graded mechanically crushed stone aggregate as in filling of pressed steel frame /hold fast blocks etc and similar complete all as specified and directed by Engineer-in-Charge.
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal exc. 6mm but n exc. 9mm complete all as specified and directed by Engineer-in-Charge.
Surface preparation & Cleaning the surface and made free of dirt, foregin particles laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expantion contraction. Cutting the grooves with suitable cutter machine in 'V' groove filled with Repair mortar/Mircroconcrete/General purpose grout as recommended propertionaly as per recommendation of manufacturer Making of Gollas at all the corners with Polymer modified mortar (1:4) Cement :Sand with 3.5% Acylic of Cement weight Supplying and applying High build waterproofing coating based on pure hydrophobic polyurethane cold applied of spray /brush applied membrane with and elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, hardness (shore A scale) 80, solar reflectance of 84% as per A ASTM E903-96, SRI of 106, capilary absorption of 0.01kg/m2 h0.5 as per EN 1062-3, adhesion must be of ˃ 2.0 N/mm2 as per EN 1542, artificial weathering must be passed as per EN 1062-11 temprature resistance must be in between -300C to +900C, no leakage upto 5 bars of water pressure as per DIN 1048 mm min 88% solid content. The system includes final top coat of high build waterproofing coating based on pure hydrophobic polyurethane white in color application in 2 coats with a total min consumption of 1.5 Kg per SQM in ratio 60% 40% in both coats respectively over a coat of epoxy primer 1:1:2 (Resin:hardner:water) with a min consumption of 0.2 Kg per SQM. Application should be given by company for the product on company letterhead (Note : Resin is one of the component of PU Magnum Primer which is two components water based epoxy system, it is classified as SR-B2 0 according to EN 13813 having properties like color of pale yellow viscocity 900mPas, density 1.15kg/lt and adhesion of ˃3N/mm2. Hardener is one of the component of PU Magnum Primer, which is a two components water based epoxy system, it is classified as SR-B2, 0 according to EN 13813 having properties like color of pale yellow, viscocity 37000mPa's, density 1.08kg/l and adhesion of >3N/mm2.
M&L Cement plastering 20mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on surface of floor etc finished even and smooth without using extra cement and making strip of size 30 cm x 30 cm by complete all as specified and directed. Note : WPCshall be measured and paid separately.
Material and labour for carrying out water proofing treatment of sunken floor complete all as specified under :-- (i) The concrete / wall surface shall be cleared thoroughly of all laitance,loose particles ,dust,grease etc and any friable and unsound area which shall be chipped,cleaned and thereafter pre-wetted to a saturated surface dried condition . (ii) In case of pot holes/superficial cracks,the same shall be repaired with polymer modified mortar using URP as admixture @ 10% of cement content (iii) The polymer modified mortar using URP as admixture @ 10% of cement content shall also be applied on vertical surfaces after removing of plaster upto 60 cm height (iv) The surface thus prepared shall be coated by applying 2 coats of Dr Fixit Hydrochem Super in the sunken areas and extending it upto 150 mm above the finished floor level.This includes layer of a 150 mm wide strip of an open woven glass fiber mesh over the PCC benching (Gole) on the 1st coat while it is still wet. (v) Rendering 15 mm in CM 1:4 admixed with integral water proofing compound LW+ @ 200 ml per bag of cement complete all as specified and as directed by the Engineer-in-Charge.
Supply & Fix 100mm dia cast iron soil, sand cast pipes, waste and vent pipe, in any length with or without ears with cement joints laid in trenches, in floors or fixed to walls as specified and directed
All as per Item No 32 here in before but 75mm bore pipe complete all as specified and directed by Engineer-in-Charge.
M&L for cutting down plants/trees/bushes of girth not exc 15 cm from roof tops/sides, externals walls of building, chajja wall junctions, junctions of rain water/ CI/ Soil waste/ Vent pipes including taking out roots entered into walls/slab surfaces, then spraying the affected area with solutions of 25 ml Glyphosphate (4% content) diluted with 1 ltr of water or as per manufacture's instructions & making good the surface using PCC (1:2:4), type B-0 or cement mortar 1:3 as per site requirement with necessary scaffolding/stagging etc. any height from ground level, complete all as specified & as directed by Engineer-in-Charge. Note :- 1. Any PVC pipes, brick works damaged during the execution of the work shall be replaced with new one to ensure leak/seepage free joint. 2. The width of such wk will be measured 0.50 sq.m extra beyond roots of the plants.
M&L for Brick work with sub class 'B' bricks, class designation 150, old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces mixed with water proofing compound, trowelled to even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge. NOTE: Integral water proofing liquid shall be measured and paid separately.
Supply only Water proofing compound complete all as specified and directed.
M&L for Rendering 10 mm thick in cement mortar 1:6,on fair faces of brick or concrete surfaces of walls finished even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 5 mm thick in cement mortar 1:3 as in soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge.
Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, column or slab and similar work including support if required and stitching of cracks with MS U clamps of 8mm dia @ 150mm c/c with inserting concrete block strecthner with cement mortar 1:3 mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with 10mm thick plastering in CM 1:4 finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.
Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.
M&L for applying two coats of cement base paint incl preparation of surfaces and coat of primer with alkali- resistant priming paint complete all as specified and directed.
M&L preparation of old decorated brick/concrete, plastered / un plastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on the walls, pillars, cornices etc. complete all as specified and as directed by the Engineer-in-Charge.
Removing existing plaster over the effloescence affected bricks to be removed using mechanical means. The affected bricks to be completely exposed complete all as specified and directed.
Apparent visible efflorescence to be first cleaned using hard wire brush and all cyrstal deposits to be removed. The bricks shall then be cleaned using soft brush of powdery crystals removed. Then make a 1 to 4 solution of vinegar and water (1 part vinegar to 4 parts water) and apply it to the efflorescence affected area using a nylon brush. Allow the vinegar/ water solution to sit on the surface of the affected area for 15 minutes, but do not allow the solution to dry. Rinse the area with clean water, using low pressure jet. Two cycles of cleaning using vinegar water solution to be repeated complete all as specified and directed.
The joints of bricks so cleaned shall be pointed using cement putty made a site using Sika Latex/SBR polymer diluted at ratio of 1:4 with water. The solution so made shall be used to be mixed with cement to make a putty consistency paste. The cement putty shall be then worked out in the joints which are clean and in SSD condition complete all as specified and directed.
The bricks so pointed shall be cleaned of all dust or deposit using brush. A undiluted single component acrylic polymer-Sika Raintite, to be used to prime the brick surface. The primer while being tacky the first coat of water proofing coating is done, second coat is applied after a time interval of 4-6 hours after the first coat has dried. The water proofing coating shall be two component polymer modified cementitious coating-Sika top seal-107, having a thickness of 1.5mm in two coats. The material to be factory batched and ready to use. The two components shall be mixed using low speed drill having a RPM 350-450 and fitted with a paddle. The mixing to be done for 3-4 mintues to give a brush able consistency mix. The coating shall be done using brush 100-150mm wide brush. It is to be take care that material while being used is agitated every 3-5 mintues to avoid powder part getting settled. The water proofing coating shall have below properties Tensile Strength - 4.56 N/mm2 after 14 days exposure (According to ASTM D 2370) Bond Strength 2.0 N/mm2 at + 27o C (failure in substate). After application of second coat and while the material is still wet, coarse sand is sprinkled over the coating so as to ensure proper mechanical key is provided for subsequent plaster complete all as specified and directed.
M&L for plastering 15mm thick over the treated surface shall be done with 1:4 cement sand plaster added with acrylic polymer-Sika Plastocrete Plus, @ 3% by weight of cement complete all as specified and directed.
M&L preparation of old decorated brick/concrete, plastered / un plastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper with painting roller complete all as specified and as directed by the Engineer-in-Charge.
Repairs to cracks of size 25 x 25 mm by cutting 'V' grooves, cleaning of grooves with water to remove loose particles, dust etc & priming with Nitto bond AR of Fosroc Chemicals Ltd (India) & filling the cracks with two component cement bond polymer modified shrinkage compensated resistant cement mortar manufactured by Fosroc Chemical (India) Ltd/ ECMAS resins Pvt Ltd complete all as specified & as directed by Engr-in-Charge.
Strengthening measures to RCC Structural members such as Col, beams, fins, Facia, chajjas & RCC Slab as per the following precedence of application & including necessary scaffolding if required upto 7.00 mtr height including dismantling loose/cracked plaster /concrete from RCC surface in any thickness all as specified & directed :- (a) Taking down the damaged/loose concrete over existing structure & providing two coat of Doctor fixit pida fin K2 (CYSTALLISING WATER PROOFING COMPOUND) (b) Providing rust coating over existing reinforcement including additional reinforcement if required. (c) The rust coating of PH RB-167/ rust free/ SHIELDOXY will be measured & paid separately in the respective item of Sch 'A' (d) Providing/filling the plain cement concrete 1:1:5:3 type A-0 using 12 mm graded crushed stone aggregate up to the depth/thickness varying from 15 to 45 mm.
M&L for applying one coat of steel bar coat of rust preventive PH RB-167/ rust free/ SHIELDOXY including preparing cleaning of corroded steel all as per manufacturer's instruction complete all as specified and directed.
Material and Labour for Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, complete all as specified as directed by Engr-in- Charge
M&L for anti skid ceramic joint free premium quality coloured tiles 300x300mm and 6-7 mm thick as in floors etc in any pattern of light & dark tiles as approved set and jointed in neat cement slurry and pointed in white or colored cement to match in floor etc , over and pointed in white cement with pigment to match the colour of tiles including dismantling existing tiles along with cement mortar and removing serviceable tile to store complete all as specified and directed.
Glazed ceramic coloured tiles 600 x 300 x 6 to 7mm thick on vertical surface such as skirting , dado etc. over and including 10 mm thick rendering in CM 1:4 thick set and jointed in neat cement mortar and pointed in white or colour cement to match tiles complete all as specified and directed by Engineer-in-Charge.
Providing and laying premium (1st) quality straight edge , ceramic tiles exterior grade WA value between 3% to 6%, flexural strenght greater that 22n/mm2 scratch resistance on mohs scale greater thatn 4 and crazing resistance of 2 cycles area of each tile exc 0.09 SQM but n exc 0.16 SQM in floors etc in any shade and design/ pattern of light & dark tiles etc set and jointed in neat ceement slurry and pointed in white or colored cement to match in floor etc , over and pointed in in matching colored polymer cement based grout to match complete all as specified.
Baroda green marble, 15-18 mm thick, (table rubbed and polished) machine cut, laid over & including 15 mm thick (average thickness) cement mortar (1:3) screed and bedded, jointed with grey cement slurry & pointed with grout of matching shade including rubbing and polishing (Granite finish), over cooking platform shelves , RCC counters, window cills & similar situations complete all as specified and directed by Engineer-in-Charge. NOTE: Full round nosing if ordered on exposed edges shall be paid separately under respective item.
M&L for Screed bed or bedding layer of mortar 20 mmthick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
M&L for 50 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, complete all as specified and directed.
Cutting , grinding and polishing the existing kota/ marble stone flooring etc with machine/grinder and finally achieve the required finish finish complete all as specified and directed.
Supply & Fix Flush shutters 30mm thick, solid core construction, with particle board core and plywood face panels, commercial type on both sides all as specified & directed. (a) Mild Steel Butt Hinges 150mm - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (804 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf.
30mm thick glazed and skeleton window shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including glazing/stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Butt Hinges 100mm medium weight- 2 nos per leaf (b) Aluminium Tower Bolt 100mm long medium grade - 2 nos per leaf (c) Aluminium Handles 100 mm medium grade - 2 nos per leaf
Solid PVC door frames of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, and edges will be painted to match with printed sheet, supply & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification colour wood colour including necessary stainless steel fittings and fixtures with suitable PVC sheet beading & jointed together with solvent cement supply & fixing in the frame at site as per specification & drawing.
S&F aluminium casement windows (with provision for cooler) with 50 micron powder coating,frames ,and mullion, for doubled panelled and double shutters to be fixed wih EPDM gasket to render glazing, air and water tight etc and aluminium beeds in inner shutters consisting of frame and mullion of complete all as specified and directed.
S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.
S&F powder coated aluiminium tower bolt 150mm long complete all as specified and directed.
S&F powder coated aluminium handles 150mm complete all as specified and directed.
S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutterscomplete all as specified and directed.
Factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows complete all as specified and directed.
40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished fixed in repair complete all as specified and directed.
S & F continuous (Piano) hinges 30 mm , mild steel, bright finish or electrogalvanised fixed in repair complete all as specified and directed.
Supply and fix floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor with overall length of cover plate100 mm complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete all as specified and directed.
S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.
Supply and fixing in repairs MS powder coated peg set of six complete all as specified and directed.
Plain, solid, straight chowkats and frames,of 2nd class HW wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
Supply and fixing mild steel helical door spring, 200 mm long, fixed to wooden chowkats or welded to angle iron/ steel door frames complete all as specified and as directed by the Engineer-in-Charge.
M&L for welding in repair to grill, guard bars, hinges to door/ window chowkats, steel windows, or similar nature of work, etc. complete all as specified and directed by Engr-in-charge. Note- Welding machine, rods, etc. required for complition of work shall be provided by the contractor. Length and thickness of welding shall be as directed by EIC.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads complete all as specified and as directed by the Engineer-in-Charge.
M & L sheet glass 3.0mm thick ordinary quality and glazing with oil putty to steel window and with wooden beads to wooden shutters in square not exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer-in-Charge. (Note : The rate quoted to include fixing of glass panes upto 3rd floor including taking down)
M & L for frosted glass 3.0mm thick ordinary quality and glazing with oil putty to steel window and with wooden beads to wooden shutters in square not exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer-in-Charge. (Note : The rate quoted to include fixing of glass panes upto 3rd floor including taking down)
S&F 1 mm thick mild steel plain black sheet in wall cladding, steel gates and similar work cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required, complete all as specified and as directed by the Engineer-in-Charge.
S&F 100 mm long stainless fancy type steel handle, cast type anodised as in repair complete all as specified and as directed by the Engineer-in-Charge.
S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter as in repair complete all as specified and as directed by the Engineer-in-Charge.
S&F 100 mm long aluminium handle cast type anodised as in repair complete all as specified and as directed by the Engineer-in-Charge.
S & F as in repair butt hinges 100mm long of mild steel cold rolled, medium weight, ISI marked fixed with screws to wooden chowkats or welding to angle iron/steel door frame complete all as specified. and as directed by the Engineer-in-Charge.
S&F as in repair 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.
M&L for rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe-290-W (Gde E-165) quality 'A' complete all as specified and as directed by the Engineer-in-Charge.
LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) both side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed by Engineer–in–Charge
LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed by Engineer-in-Charge.
S&F 18 mm thick LEAD FREE PVC Celuka ply as in frames of size 75X40mm of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.
12mm thick LEAD FREE PVC Celuka ply (Minimum density 600kg/Cum) of fixed with stainless steel screws, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed by Engineer-in-Charge.
S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.
S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.
Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engineer–in–Charge.
Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed by Engr–in–Charge.
S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified and directed.
‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed by Engineer–in–Charge.
S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.
Stainless Steel 304 grade wire Basket (average weight 2.5 to 4 Kg. per basket) of pull out type like plain/cup & saucer/bottle/ multipurpose /2-3 shelf baskets etc. for kitchens of required size fixed in position complete all as specified and directed by Engineer-in-Charge
S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and directed.
Supplying and fixing in repairs vitreous china wash hand basin white flat back of size 550x440mm including CI brackets , chromium plated waste coupling, waste pipe etc., (incl all waste fittings) complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing in repairs Vitreous China squatting pan of “Orissa Pattern” of size 580x440mm coloured with integral footrest complete including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe and making good the floor in cm 1:3 all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include provision of "P" Cast Iron trap.
10 ltr capacity PVC valveless, syphonic action dual flush type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe fixed in repair complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swivel joint in including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubbing and connections incl cleaning for refixing or removing to store yare of size 15mm bore complete all as specified and directed.
Steel water tubing, galvanised, medium grade, ISI marked, 15 mm bore with and including all fittings , cutting, threading and fixed to walls and ceilings or laid in floors and making good the surfaces to match the existing ones complete all as specified and directed by Engineer-in-Charge.
All as per Serial No 110 here in before but except water tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item)
Taking up or down steel tubbing and connections incl cleaning for refixing or removing to store yare of size 20mm bore
Steel water tubing, galvanised, medium grade, ISI marked, 20 mm bore with and including all fittings , cutting, threading and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
All as per Serial No 113 here in before but except water tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item)
PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge.
Supplying & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colour cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including dismantling old unserviceable cement concrete/PVC water tanks of capacity exc 300 ltrs & n.exc 500 Ltrs complete all as specified and directed by Engineer-in-Charge. Note : (i) Inlet, outlet & wash out pipe will be measured paid for separately. (ii) The quoted rate is inclusive of minimum one union each on inlet and outlet of water tank as per size of pipe shall be provided.
Supplying and fixing in repairs 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed by Engineer-in-Charge.
Ball brass valve , high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs complete all as specified and directed
Stop valve cast copper alloy acrewed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bor 20mm fixed as in repair complete all as specified and directed
Supplying and fixing in repairs 15mm bore angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing stop valves (concealed type),cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions,long shank and cup of 15 mm bore complete all as specified and directed by Engineer-in-Charge.
Supply & Fix sinks with drainage board made of stainless steel 0.80 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
S&F 25mm dia stainless steel fancy type drapery rod of thickness 1.0 mm including pelmet/Stainless steel bracket and stainless steel fancy type fennel, complete all as specified and directed by Engineer-in-Charge.
Taking down of Eaves gutter/rain water pipe( AC rain water pipe /SWG pipe line of any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engineer-in-Charge.
150mm dia PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to walls with and inclundig holder bad clamps made out 40mm by 30mm F1 and 12mm dia round iron stays and making good the disturbed portion in CM 1:3 to match with surrounding area completer all as specified and directed
PVC (SWR) bends for 150mm dia rain water pipes with rubber ring joints complete all as specified and directed
Supplying and fixing in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing in repairs Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), P or S trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe with flush pipe 32 mm and plastic seat cover complete all as specified and directed by Engineer-in-Charge.
S&F in repairs CP health faucet (ABS body) including 1.25 mtr long flexible tube and wall hook complete all as specified and directed by Engineer-in-Charge'.
S&F Stainless steel plate rack made out of 0.80 mm thick stainless steel sheet of size 900x750x250mm complete all as specified and directed by Engineer-in-Charge.
M & L coloured chequred cement concrete tiles 30 cm x 30 cm x 20mm thick,made of grey cement set and jointed in neat cement slurry with grey cement and pigments as in floors to match the shade over screed bed or bedding layer or mortar 15mm thick in cement mortar 1:4 for laying floor finished, complete all as spcified and directed.
Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge.
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction but welded tubes conforming to IS 1161-1979 grade St-240 as in rafters, purlins, vertical posts etc complete all as specified and directed by Engineer-in-Charge.
Preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of walls, ceiling etc complete all as specified and directed Engr-in-charge.
M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan and including new PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel cadmium plated terminal box not less than 1.6mm thick for mounting Modular type switches, sockets, fan regulators etc with modular top cover including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed complete all as specified and as directed by Engineer-in-charge. (Switches and regulators shall be measured and paid for separately.) Note II-( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-III- The cost of Modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item) Note-IV-Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. Note : (i) Contractor must produce certificate of FRLSH wire as well as on site testing of FRLSH wire.
M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by two 2 way switches and including new PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel cadmium plated terminal box not less than 1.6mm thick for mounting Modular type switches, sockets, fan regulators etc with modular top cover including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engineer-in-Charge ( Wiring shall be done as per colour code in IS for phase, neutral and earth). (Note:- Cost of Eye/bottle thimbles used for connections in switches,sockets,MCBs in DBs shall deemed to be included in the unit rate quoted for this item.
Description all as per Sl item No 137 above herein before but 6 Amp socket point on same board but with other switches complete all as specified and directed Engr-in-charge.
Description All as per Sl item No137 above herein before but one 6 Amp socket point on independent board complete all as specified and directed Engr-in-charge.
All as per item No. 137 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 1.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board complete all as specified and directed Engr-in-charge.
M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in existing conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engineer iin-charge Note-I-(Switches and regulators shall be measured and paid for separately). Note-II- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-III- (The cost of hylem cover plate and metal boxes is deemed to be included in the unit rate quoted for this item). Note -IV - cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item.
All as per Sl item No 7.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.
All as per Sl item No 7.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.
All as per item No.7.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 1.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board complete all as specified and directed.
Supply and fix in replacement of Modular switch 1 way, 6 Amps, 1 module complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of Modular switch 2 way, 6 Amps, 1 module complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of Modular switch 1 way, 16 Amps, 1 module complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of Modular Bell switch 1 way, 6 Amps, 1 module complete all as specified.and directed by Engr-in-charge.
Supply and fix in replacement of Bell ding dong electronic complete all as specified and directed by Engineer-in-charge.
Supply and fix in replacement of Modular socket 5 pin 6 Amps, 2 module complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of Modular socket 5 pin 6/16 Amps, combination type 2 module complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of Fan regulator modular type 2 module complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of Ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed by Engr-in-charge.
S&F blank plate wherever required all as specified & directed
Supply and fix in replacement of Lamp holder including LED bulb 12 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge.
M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring.
Supply and fix in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed by Engr-in-charge.
Supply and fix in replacement of MCB , SPN, 240 Volts ,40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.
M & L for replacement of UNSV Earthing complete with galvanised steel earth plate electrode, 600x600 x 6.0mm thick buried directly in ground(earth pit not less than 2.25m deep below normal level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No 3 of SSR Part I. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1: 3: 6 type C1, and 50mm thick RCC 1 : 2: 4 chamber cover and with 8mm dia mild steel re-enforcement @ 15Cm C/C spacing both ways with a handle made of 8 mm bar for fitting, galvanised iron funnel, wire mash watering pipe GI 20 mm dia light grade, and protection to earth lead shall be provided with GI pipe light grade 15mm dia up to 7.5m from the earth plate electrode, excavation including charcoal and common salt in alternative layers 15 cm Thick mixed refilling of soil etc complete all as directed by Engineer-in-charge.
Supply & fix in replacement of Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.
Supply and fix in replacement of Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 10/12W 6500K of capacity ,watt,2 ft long incl 3 core flexible wire 0.5 sqmm copper cable complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of existing UNSV wall mounted fitting with decorative, wall mounting, champagne gold finish fixture with polycarbonate body opal diffuser suitable for 14 W LED lamp (B22) complete all as specified and directed by engr-in-charge.
Taking down and refixing of PVC exhaust fan after replacement of PVC exhaust fan motor suitable for 200/250 mm sweep including necessary electric connection complete all as specified and directed by Engr-in-charge.
Taking down and refixing of exhaust fan after replacement of exhaust fan motor suitable for 300 mm sweep complete including electric connection complete all as specified and directed by Engr-in-charge . Note:- cost of louvers is included in this rate.
Supply and fix in replacement of surface mounted LED luminaire of capacity 18 W pressure die-cast aluminium liminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver complete all as specified and directed by Engr-in-charge.
Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge.
Supply and fix metal flush box of 2 module in MAP qtrs located in NEW cantt complete all as specified and directed.
Supply and fix metal flush box of 3 module in MAP qtrs located in NEW cantt complete all as specified and directed.
Supply and fix metal flush box of 6 module in MAP qtrs located in NEW cantt complete all as specified and directed.
Supply and fix modular cover plate of 2 module in MAP qtrs located in NEW cantt complete all as specified and directed.
Supply and fix modular cover plate of 3 module in MAP qtrs located in NEW cantt complete all as specified and directed.
Supply and fix modular cover plate of 6 module in MAP qtrs located in NEW cantt complete all as specified and directed.
M & L for rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.
DELTA CONSTRUCTION CO
SWAMI ENGINEERS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .