Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC 57 7 MEGHNAD SAHA SARANI PRADHAN NAGAR SILIGURI 734 403 DIST DARJEELING | SILIGURI | DARJEELING | WEST BENGAL | 734403 | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹28.7 L+₹11,623 (0.41%)Rejected-AOC 227 2 5TH B MAIN ROAD 2ND BLOCK HRBR LAYOUT KALYAN NAGAR BANASAWADI BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹29.3 L+₹74,386 (2.60%)Rejected-AOC NO 26 SRI GANESH 7TH CROSS BDS NAGAR DIBBUR RAMAIAH LAYOUT K NARAYANPURA MAIN ROAD BANGALORE 560 077 | BENGALURU URBAN | KARNATAKA | 560077 | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹31.9 L+₹3.3 L (11.6%)Rejected-AOC NO 49 MSN NILAYAM 3RD CROSS HILL VIEW GARDEN TUNAHALLI SUBRAMANYAPURA POST BANGALORE 560061 | BANGALORE | BANGALORE | KARNATAKA | 560061 | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹34.7 L+₹6.1 L (21.5%)Rejected-AOC 20 1ST A CROSS SAI NAGAR AREHLLI UTTARHALLI BANGALORE 560 061 | BENGALURU URBAN | KARNATAKA | 560061 | L5 | Rejected-AOC Higher bid value |
Tender Value
Refer Docs
EMD Value
₹58,000
Closing Date
4 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BANGALORE
GE (AF) BANGALORE, HQ TC AIR FORCE , BANGALORE 560006
PROVN OF TOILET IN BLDG NO (P-2 TO P-7) AT HQ TC (U) BANGALORE
2022_MES_529819_1
8906/GE/36
Open Tender
Civil Works
Works
180 days
GE (AF) BANGALORE
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Yes
GE (AF) BANGALORE
₹58,000
Yes
10 Sept 2022
9 Jun 2022
6 Jul 2022
9 Jun 2022
4 Jul 2022
21 Jun 2022
10 Jun 2022 - 16 Jun 2022
60 days
Amount
Surface dressing n exc 15 cm deep in soft/ loose soil on uneven surface of natural ground filled up area, removing vegetation, scrapping high patches and filling in low patches with the scrapped soil to give and even & neat compete all as directed.
Excavation in trenches not exc 1.5m wide and not exc 1.50 mtrs in depth for foundations etc and getting out in hard/dense soil complete all as specified & directed.
M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) in foundation, fillings and mass concrete complete all as specified nd directed
M&L Sand filling under floors or in foundations including watering and consolidation
Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.
Use and waste of form work to sides of pillers, posts, struts,piers, columns and stanchions for rough finished flat surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports,slab supported on wall etc. also splays between floors and beams, etc for rough finished surface complete all as directed.
M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (ennealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.
All as per item No 11. above but as in Beams, cantilevers, bressummers, lintels,slab supported on wall etc all as directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil.
Removing excavated material (soil) not exc 50m and depositing where directed at a level not exc 1.50M above the starting point complete all as specified and directed.
M&L for pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:6, complete in walls all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement all as specified.
M&L for rendering 15mm thick cement plaster in cement morter 1:4 with on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement.
M&L for 2coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including a coat of primer and preparation of new surface all as specified.
M&L for 2 coats of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces all as specified.
S&F of steel work in tubular trusses, purline including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/in ridges, fixed with self tapping screws as specified and directed.
M&L for painting steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel (ordinary tint) paints over a coat of red oxide priming paint including preparation of new or previously untreated surfaces all as specified and directed.
Providing and fixing in position suspended false ceiling made out of 10mm (apprx.) thick Gypsum Plaster Boards of Indian Gypsum or equivalent made G.I standard section framework in the pattern as per manufacturer's instruction. The G.I. Section frame work shall be tied to the roof and walls with the anchor fastener screws/bolts of appropriate size recommended by the manufacturer. The boards shall be fixed to the frame work with the screws and the joints shall be flushed and finished with requisite jointing compounds paper tapes etc. Rates includes execution of works in different levels/offsets etc as directed. The surface shall be finished evenly by applying putty, sand papering, applying primer and two coats of plastic emulsion paint evenly including necessary additional ceiling sections and intermediate channels and openings for light fixtures, A.C. ducts, vertical drops, offsets. etc complete all as directed.
Material & labour Hard core, broken stone/boulders to gauge n exc 63 mm complete all as directed.
M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection, path etc finished the surface even & smooth without using extra cement complete all as specified
M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc.
M & L Screed bed or bedding layer of mortar 15mm thick for laying floor tiles (CM 1:6) complete all as specified and as directed by the Engineer-in-Charge.
M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete over 15mm thick screed bed CM 1:6 as specified and as directed
M&L for non skid Ceramic tiles coloured 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm each, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as specified and as directed
M&L Glazed colour ceramic tiles in vertical surface of size 300mmx600mm x7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and as directed.
S&F 15mm two in one Bib taps with wall flange, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.Make:Jaquar Cat No-OPP 15041PM/ Cat No-ORP 10041PM
S&F premium quality 15mm bib tap with wall flange chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified of make- Jaguar Cat No-FON-40081/OPP-15037PM.
S&F soap Dishpensor with glass bottle Make-Jaguar Code No- AKP35735P/ ACN-CHR-1135 N
S&F soap Dish Make-Jaguar Code No- AQN-7731/AKP-35731P
S&F Toilet paper roll holder with flap of Make-Jaguar Code No- AKP-35753P
S&F Towel rack without lower hanger of 600 mm long and 03 no hooks Make-Jaguar Code No- AHS-1581H
S&F Towel ring square with round flange of Make-Jaguar Code No-ACN-CHR-7721
S&F 15mm bore single liver basin mixer with out pupup waste with 450 mm longbraded hoses complete all as specified & directed. Make -Jaguar Cat part No- OPP 15011BPM/ ORP-10011BPM
S & F table top basin of size 565X425X140 mm complete all as specified and directed make-Jaguar Cat No-KUS-WHT 35935/ JDS-WHT-0547
S&F 15mm bore hand shower (Health Faucet) with 8 mm Dia, 1.2 Meter Long flexible tube & wall hook NRV (back flow preventer) of make: Jaguar Cat No-ALD 577/ALD -573.
S&F Towel rail of 600 mm long Make-Jaguar Cat no-AHS-1507
S&F urinal without sensor,wall hung, top inlet,,built in waste outlet with water seal of size 730mmx480mmx310mm complete, Make-jaquar cat No- URS-WHT-0706, complete all as directed.
S&F 8 mm thick curved shape urinal partition with frosted glass chrome finish of size-900mmx450mm Make-Jaguar Code No- JSE-CHR-110UC450X or equailent.
S&F stainless steel shower basket large size Make-Jaguar Code No- CAN-1179N/CAN-CHR-1179N.
S&F glass shelf of 600 mm long with cp bracket.Make-Jaguar Cat no-CAN-1171N or equailent.
Supply and fixing 32 mm bore brass chromium plated bottle trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed. Make - Jaquar Cat No- ALD -769L 300X190 or equailent.
S & F RimlessSingle Piece-WC with UF slim seat cover, hinges fixing accessories and accessories Set,Cistern fitting,size 380mmx670mmx765mm with hydraulic sheet cover and connecting to 'S' trap 300 mm Make Jaguar FSS-WHT-29853S300UFSM complete all as specified.
S&F CP connection 15mm dia and 450mm long with two Nos of brass checknuts and washers complete.Make jaguar cat no-ALD-805B.
S&F angular stop cock with wall flange 15 mm dia chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions, all as specified and as directed Make-Jaguar Cat no-OPP- 15053PM/ORP 10053PM
S&F PVC Gratings size 125 mm dia complete all as specified & directed.
S & F 12mm thick toughened glass fixed as a partition or door with or without aluminium frame work including necessary SS joinary fittings like handle, locking arrangement,floor door spring,joining cleats etc complete all as specified and directed.
M&L for Cutting chases in stone masonry walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth etc complete all as specified and directed
S&F UPVC15mm dia pipe of pressure rating 10kgf/cm² fixed complete to walls, ceiling or in floor etc., any type of pipe complete all as directed.
All as item no 56 above but 20mm bore
All as item no 56 above but 25mm bore
S& F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed with floor including necessary fixing cleats/ clamps, complete all as specified and directed.
S& F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including necessary fixing cleats/ clamps, complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps complete all as specified and directed.
S&F PVC bends of 110 mm dia complete all as specified and directed.
PVC (SWR) branch piece, of 110 mm dia single (single Y) equal or unequal.
S&F PVC bends of 75 mm dia complete all as specified and directed.
PVC (SWR) vent cowl of 110 mm dia.
S&F rotational moulded polyethylene water storage tanks, capacity in litres 500 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.
S&F ball valves 20mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms).
S&F 20mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed.
S&F PVC (SWR) floor trap with grating of 75 mm dia, setting and jointing with solvent cement.
S&F PVC (SWR) gully trap 125/110 mm dia, setting and jointing with solvent cement.
Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, supplying & fixing in opening as per specifiction & drawing on Page 156 of SSR Part-II (2010) complete all as specified & directed.
Supply & fix Factory made solid moulded panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) .
S&F 100mm long Butt hinges, medium weight, cold rolled mild steel,
S&F 200mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F150mm Aluminium handles, cast type anodised.
S&F designer UPVC window/ventilator including frame work and all accessories like-handle/tower bolt/hinges/lock/glass etc complete, as colour approved by GE. complete all as specified in SSR Part-I and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for
S&F 18/19mm Prelaminated medium density fibre particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work
Supplying & fixing of Intermat auto closing concealed hinge, Kutchina'/Hettich/Hafele make complete all as directed.
Supply & fixing of 6" premium quality crome finish Handle, "Kutchina"/Hettich/Hafele make complete all as directed.
Supply & fixing of good quality Telescopic channel set for drawer multi-tech high capacity 500 mm long , "Kutchina"/Hettich/Hafele Make.
S&F 19-20mm wide and 0.80mm thick decorative type PVC beading complete all as specified and directed.
M&L for RCC cover slabs type B-1,1:2:4 (20 mm graded agg)supported on walls beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like as man hole cover etc.all as directed.
S& F 150 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed with floor including necessary fixing cleats/ clamps, complete all as specified and directed.
M & L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 for 150 mm dia pipe, complete all as specified and directed.(Note: Rate incl for necessary form work,shuttering and support to concrete for laying bed) .
Cutting into existing manholes for connecting new drains 150 mm bore, making good to pipe and rendering cutting out existing banching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching
M&L PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating complete all as specified and directed.
M&L PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in surface channel and drain for man holes and the like including weathering slightly rounded or chamfered angle and throating complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil.
Material & labour Hard core, broken stone/boulders to gauge n exc 63 mm complete all as directed.
M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for coloured Chequered cement concrete tiles 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified & directed.
M&L for pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:6, complete in walls all as specified and directed.
Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade with recessed PVC conduit ISI marked as approved with all accessories and fixing arrangements on wall/ceiling on wall including GI sunken boxes with cover fixing on recessed wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-
One light point controlled by one single pole 5 Amps switch
One fan/ exaust fan point controlled by one single pole 5 Amps switch
One switch socket out let point 5 Amps on same board with other switches
M&L for cutting Chassis in wall/ ceiling for point wiring etc complete all as specified and complete.
Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.
Supply and fixing modular swichone way 6 Amps, 230 volts all as specified
Supply and fixing modular socket, 6 Amps 2/3 pin combined two module, 230 volts all as specified
Supply and fixing modular white cover suitable with frame 8 module.
Supply and fixing modular metal flush board 8 module
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m.
S&F Wall mounted fan 400mm with oscillation complete with all fixing accessaries.
Supply and fixing LED lights fitting 4 feet, 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
M&L fabrication for booster pump made out of MS sheet cover 2mm thick, along with MS frame to cover pump complete
Supply and laying of sub main wiring with 2 single core PVC insulated cable with copper conductor multistranded 1100 volt grade 4.0 sqmm in PVC conduit and including 1x4.0 sqmm PVC insulated multistranded copper conductor in concealted conduit and conduit accessories and connecting to main earth dolly complete all as specified and directed
M/s BHOOMI ELECTRICALS
SRI GANESH ENTERPRISES
PRAGATHI BUILDERS
K. VENKATESH NAIDU
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .