GE (N) P/TOKEN- 18 OF 2024-2025REPAIR / MAINT OF OTM ACCN INCLUDES HQ CEPZ , ZRO , DEO OFFICE , COMD LIB , VETRENE NODE, COMD CANTEEN , AWWA COMPLEX , AGE E/M OFFICE AND OTHER MISC LOCATIONS UNDER AGE B/R (CENTRAL) AT GE (N) PUNE

Amount

M&L for double charged vitrified tiles 8 to 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick in cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match shade including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish from the premises complete all as specified and directed.

M&L for wall cladding tiles 600 x 300 mm x 07 to 08 mm thick as in wall cladding , set and jointed in neat cement pest & pointed in white or coloured cement to match, over and including backing coat of 10 mm th in cement mortar (1:3) including dismantling existing tiling,cement bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for double charged Vitrified ceremic tiles 08 to 10 mm thick of approved shade and size as in vertical surfaces, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including backing coat of 10mm thick in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish from the premises complete all as specified and directed.

Dismantling Single layer Manglore Pattern or similar tiles in roofing and rubbish off the premises complete as as specified and as directed

Material and labour for roof tiles Manglore pattern interlocking at side joints, laid dry in roofing complete all as specified and as directed.

Ditto- all as per serial item No 5 here-in-before but using Mangalore pattern roof tiles obtained from dismantling.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base including demolition of existing PCC and removing rubbish off the premises complete all as specified and directed.

M&L for 25mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.06 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for textured heavy duty exterior tiles of size 300 x 300 mm x 10 mm thick , set and jointed in neat cemet slurry and pointed in white or coloured cement to match over and including a screed bed of 15 mm thick in CM (1:4) complete all as specified.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface 300mmx450mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including backing coat of 10 mm thick in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premisescomplete all as specified & directed.

M&L for coloured glazed ceramic highlighter tile of size 600mm x 300mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:3 etc including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified & as directed.

M&L for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar including dismantling of existing cudappah stone and removing rubbish off the premises complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge.

M & L Machine cut kota stone 20-25 mm thick over cement screed base laid and Jointed with Grey cemnet slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring / steps /slabs over and including 15 mm screed in CM (1:4) including dismantling of existing stone slabs /tiles of any description or thickness laid bedded and pointed in cement moratr and removing rubbish off the premises complete all as specified and as directed.

Supply and fix in repair fibre glass reinforced translucent corrugated sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Supply and fix in repair fibre glass reinforced translucent Plain sheeting 2.00 mm thick fixed with coach screw and washer in wall and gate etc. complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregates as in plinth protection, concrete shall be laid in alternate bays not exc 3.0m in length, finished even and fair including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed.

M&L for Brick work with fly ash old size bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement with sagol finish including taking down cement plaster on brick/ stone wall , raking out joints, hacking for key scrubbing down with water etc. and removing rubbish off the premises complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement on brick/ stone wall , complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement with sponge finish using water proofing compound @3% or as per manufactuer's instructions and taking down cement plaster on brick/ stone wall including raking out joints, hacking for key scrubbing down with water etc. and removing rubbish off the premises complete all as specified and as directed. (Note: Waterproofing compound shall be measured and paid separately under relevant item as supply only).

Supply only liquid water proofing compound make pidicrete of pidilite / cement mix plus of berger complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces and applying two coats of cement base paint over a coat of cement primer all as specified and as directed.

M&L for preparation of new plastered or unplastered wall surfaces of any description over 10cm girth or width not otherwise described and applying two coats of acylic distemper over a coat of primer all as specified and as directed.

Material and labour for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends of area n exc 1.5 Sqm each and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes)

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing with emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces to receive new finish complete all as specified and as directed.

M&L for complete removal of existing treatment on ceilings using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed.

M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces complete all as specified and as directed.

M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces complete all as specified and as directed.

M&L for applying one coat of alkali resistant priming paint on wall complete all as specified and as directed.

M&L for applying one coat of alkali resistant priming paint on celing complete all as specified and as directed.

M&L for two coats of acrylic distemper of approved tint on wall surfaces complete all as specified and as directed.

M&L for two coats of acrylic distemper of approved tint on ceiling surfaces complete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

Preparation of old treated plastered/ false ceiling surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wooden based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm girth or width and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of New or previously untreated steel surface of any description over 10cm girth or width and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old painted wooden/asbestos surface in ceiling and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old treated plastered / unplastered surfaces by brooming down with steel brush and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of old treated plastered / unplastered surfaces by brooming down with steel brush including removal of moss, fungus, green growth of vegetation,make surface free from loose particles, oil stains etc etc and applying two coats of cement base paint complete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying one coat of plastic emulsion paint complete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying one coat of lustre paint of ASIAN paint or equivalent of Berger/ Nerolac complete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying two coats of lustre paint of ASIAN paint or equivalent of Berger/ Nerolaccomplete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying one coat of texture paint complete all as specified and as directed.

Material and labour for scrapping out old treated wooden surfaces in floors, staircase etc ,sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed.

All as per serial item No.50 here-in-before but as in wooden doors, window and wall paneling.

M&L for preparation of old treated surfaces of wall and applying one coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/shalimar) to, roof parapet wall surface, floor etc complete all as specified and as directed.

M& L For two Coats of exterior grade emulsion roof paint over Manglore tiles by mechanical sprayer upto a height of 15 M including cleaning of Roof by high speed water jet all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete including dismantling Corrugated, Semi corrugated etc. sheets all as specified and as directed.

S&F in repair for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

S&F in repair for 6mm thick asbestos cement, two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

Dismantling structural steel work including doors, gates, framed truss etc. complete all as directed.

Supply and fix mild steel work in tubular trusses including special shaped washer etc. complete using hollow mild steel sections round, square or rectangular for structural use as in main and cross beams, hip and jack rafters, purlins conforming to IS 4923:1997 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Supply and fix mild steel work in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to IS 4923:1997 fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

M&L Mild steel work of angle, channel plates etc as in framed roof truss , purlins brackets etc including bending and welding angles,bolts as necessary, gusset plates, riveting, etc , conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified. (Renewal of builder's hardware if specially ordered shall be measured and paid for separately)

Taking down shutters of any description area exc 1.5 Sqm but not exc 4 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified. (Renewal of builder's hardware if specially ordered shall be measured and paid for separately)

S&F in repairs Capsule type automatic door closure stainless body 150mm long of make Godrej or equivalent

M&L for GI tubing 15mm bore medium grade with all fittings & fixed complete to walls & ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and as directed.

M&L for GI tubing 20mm bore medium grade with all fittings & fixtures complete laid in trenches fixed including taking up or down steel tubing and connections complete all as specified and as directed.

S&F in repairs chromium plated two way bib cock with wall flange 15mm dia Cat No. LYR-38041 of make Jaquar ‘Lyric' series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated fittings angular stop cock with wall flange 15mm dia Cat No. LYR-38053 make Jaquar ‘Lyric'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated pillar cock 15mm dia Cat No. ARI-38011 of make Jaquar ‘‘Aria'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated pillar cock 15mm dia Push type all as specified and as directed. Cat no F-1012451 Make Cera or equivalent

S&F in repairs chromium plated single towel rail 600mm long including built in side brackets ,Cat No. ACN-1111SM of make Jaquar ‘CONTINENTAL'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated toilet Rol holder ,Cat No. ACN-1151N of make Jaquar ‘‘CONTINENTAL'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated soap dish ,Cat No. AcN-1121N of make Jaquar ‘'S Series or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated towel ring square with round flange, Cat No. AQN-7721 of make Jaquar ‘CONTINENTAL'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs ,Cat No. QQT-7281 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated towel rack, 600mm long with lower hangers,Cat No. ACN-1181S of make Jaquar ‘Continental's Series or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repair 5 mm thick float glass looking mirror decorative type of size with 6 mm thick ply wood backing and 1st class hard wood frame including french polish complete all as specified and as directed.

S&F in repair brackets for drapery/ curtain rod, decorative type, of stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.

S&F in repair decorative head for drapery/ curtain rod 25 mm dia of stainless steel complete all as specified and as directed.

S&F in repair for drapery/ curtain rod of 25mm dia, decorative type, of stainless steel complete all as specified and as directed.

S&F in repair brass chromium plated mixer for mixing hot and cold water screwed down high pressure for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs, chromium plated long body bib cock with wall flange 15mm dia Cat No. CON-107 KN of make Jaguar ‘CONTINENTAL' series or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in reapir 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

M&L for GI tubing 25mm bore medium grade with all fittings & fixed complete to walls & ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and as directed.

S&F in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 32mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S & F in repair 18 mm thick HDHMR board duly edge banded with 0.8 mm thick PVC taping, as in cup board shutters, including taking down existing plywood. design and colour shall be as approved by GE complete all as specified and directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

Material and labour for 0.90mm thick white laminate type 1 with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

Material and labour for second class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sq.cm but not exc. 6 Sq.cm complete all as specified and as directed.

S&F in repair stainless steel auto close/ hydraulic hinge of size 50 mm suitable for shutter of not exc 0.50 sqm area complete all as specified and as directed. Make Prayag Cat No. 5120 or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repair stainless steel hinge 50 mm long for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.

S & F Continuous (piano) hinges, stainless steel, Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.

S&F in repair Brass parliament hinges 150 mm long for decorative wooden door , window shutter fixed with Self Tapping brass screws complete all as specified and as directed.

S&F in repair 75 mm long brass handles for cupboard shutter fixed with Self Tapping brass screws complete all as specified and as directed.

S&F in repair 75 mm long stainless steel handles for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.

M&L for smartcare bathroom waterproofing triple layered (polypropylene- polyethylene-polypropylene) membrane 550 micron thickness, approx. weight 280gms/sqm over toilet floor fixed using smartcare tile adhesives as per manufacturer's instructions complete all as specified and as directed. Make: Asian or equivalent of burger/ pidilite complete all as specified and as directed.

Supply and fix in repairs vitreous china coloured wash down water closet (pedestal / wall mounted Type) cascade type ‘P’ trap or 'S' Trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Material and labour in repair for fixing 12mm thick Gypsum board PVC coated false ceiling on and including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways complete all as specified and as directed. Make :- Armstrong, Diaken,

Material and labour for 3 to 4 mm thick one side decorative group match veneer with and including two or more coats of melamine polishing till desired finished is achived complete all as specified and as directed.

Supply and fix in repairs Garware Sun Control polyster film, 50 micron, reflective type fixed on existing glass panels complete all as specified and as directed.

Supply and fix in repair for powder coated aluminium door shutters, aluminium section weighting not less than .55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 150mm handles 2 Nos in each shutter, 200 mm tower bolt 01 Nos in each shutters, 100mm 03 Nos stainless steel hinges in each shutter, anodised aluminium snap beading screws etc complete all as specified and as directed.

Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

Supply and fix in repair aluminium powder coated louvered ventilator using rectangular tube of size 63.50 x 25 x 1.5 mm with provision of space for exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

Supply and fix in repair aluminium powder coated three track sliding window with two glazed shutters, with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix in repair 10 to 12 mm thk AC borad as in eaves board and simillar work at height exc. 10 m and not exc 15 m including two coats of synthetic enaml paint over a coat of primer complete all as specified and directed.

Supply and fix in repair 06 mm thk AC borad as in soffit of roof projection and simillar work at height exc. 10 m and not exc 15 m including two coats of synthetic enaml paint over a coat of primer complete all as specified and directed.

Supply and fix in repair toughened glass 10 to 12 mm thick as in partition , doors , shelves etc including necessary fittings and fixtures all as specified and directed.

labour only for Mirror polishing on marble/ granite/ Kota stone/ stone work by machine grinding where ever required to give high gloss finish complete.

M & L for preparing surface of previously treated concrete , plastered surface & applying a coat of synthetic enamel paint complete all as specified and as directed.

M&L Running weldings in repairs thickness of metal n exc 6 mm complete all as specified and as directed.

Ditto all as per item No 120 above but thickness o metal exc 6 but n exc 9 mm

Welding in repairs n. exc 2.5cm in length thickness of metal n exc 6 mm complete all as specified and as directed.

Welding in repairs n. exc 2.5cm in length thickness of metal exc 6 mm but n exc 9 mm complete all as specified and as directed.

Ditto all as per item No 122 above but exc 2.5cm but n exc 5 cm in length thickness of metal n exc 6 mm

Taking down chowkats or frames not exc.1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed

Ditto- all as per Item No.124 above but exc. 1.5 sq. m but n exc 4 sqm each complete all as specified and directed

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S&F Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 5mm thick PVC Sheet, (any colour as approved) on both sides core shall be filled with 19mm to 20mm thick PVC solid board complete all as specified.Note : All screws shall be self tapping chroming plated all as specified and directed by Engineer-in-Charge.

Supply and fix second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F floor door stopper of brass type polished and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

S&F floor door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

S&F in Stainless steel butt hinges 100mm complete all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as specified and as directed

S&F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed complete all as specified and as directed

S&F in repair floor door stopper of brass type polished and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

S&F in repair floor door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

S&F in repair Stainless steel butt hinges 100mm complete all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as specified and as directed

S & F in repairs Magnetic and connected plate to shutters and frame complete all as specified and directed.

M & L in repair 4 mm thick ACP (Aluminium Composit Panel) wall Panelling,Vertical Flat surface including 25 x 25 mm hollow aluminium pipe grid framing fixed in partition complete all as specified and directed.

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repair for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed.

Supply and fix in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

Supply and fix in repair for corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

Supply and fix in repair SS square grating 5"x5"mm size and thickness 0.8 -1mm of grade SS 304 with/without hole complete all as specified.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/S Eknath agencies (BID ID -3135330)

Pratap enterprises (BID ID -3135504)

K.S.JITE AND SONS (BID ID -3135689)

Vijay Construction and Company (BID ID -3134603)

THE SAIRAM CONSTRUCTIONS (BID ID -3135800)