Widening and Strengthening of Mohanpur to Ganjdundwara Road (ODR) in District Kasganj with 5 year Maintenance

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m as per MoRTH specification 301(3.06) Including all taxes But Excluding GST.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. as per MoRTH specification clause No. 305(3.16) Including all taxes But Excluding GST.

Construction of granular sub-base by providing close graded Material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per as per MoRTH specification clause 401(B) Including all taxes But Excluding GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as per MoRTH specification clause 406(B) Including all taxes But Excluding GST.

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per MoRTH specification clause 602. Including all taxes But Excluding GST.

Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per MoRTH specification clause 502(5.01) Including all taxes But Excluding GST.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.as per MoRTH specification clause 503(II) Including all taxes But Excluding GST.

Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. as per clause 505(B) Including all taxes But Excluding GST.

Providing and applying tack coat with bitumen Bitumen VG-10 using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. as per MoRTH specification clause 503(I) Including all taxes But Excluding GST.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Including all taxes But Excluding GST.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 as per MoRTH specification clause No. 305(3.18) Including all taxes But Excluding GST.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 as per MoRTH specification clause No. 305(3.18)( Carted Earth ) Including all taxes But Excluding GST.

Reinforced cement concrete M15 grade 5th Kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 804(i) Including all taxes But Excluding GST.

Reinforced cement concrete M15 grade Kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 804(ii) Including all taxes But Excluding GST.

Reinforced cement concrete M15 grade Hectometer stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 804(iii) Including all taxes But Excluding GST.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per as per MoRTH specification clause 304(12.1) Including all taxes But Excluding GST.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. As per MORT& H Clause 2100(12.4) Including all taxes But Excluding GST.

Filling of Dry 40 mm Brick Ballast of in side of pipe. per PWD specification (SI-2A) Including all taxes But Excluding GST.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. As per MORT& H Clause 1300(12.5) Including all taxes But Excluding GST.

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications 1300&2200(13.1) Including all taxes But Excluding GST.

Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 Including all taxes But Excluding GST.

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications As per MORT& H Clause 1300 & 2200 (13.3) Including all taxes But Excluding GST.

Providing laying and fixing of 1000 mm dia NP-3 Class Spigot Hume Pipe Including all taxes But Excluding GST.

Providing laying and fixing of 600 mm dia NP-3 Class Spigot Hume Pipe Including all taxes But Excluding GST.

Lettering and painting of culvert and parapet etc. complete. Including all taxes But Excluding GST.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. Including all taxes But Excluding GST.

Providing and laying boulders Apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each as per drawing & Technical Specifications. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 2503(15.1)

PCC M-15 Grade leveling course below approach slab complete as per drawing and technical specifications. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 2700(14.10)

Plain / Reinforced cement concrete in open foundation complete as per drawing and technical specifications (PCC Grade M-15). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1700, 2100 (12.8 A)

Plain / Reinforced cement concrete in open foundation complete as per drawing and technical specifications (PCC Grade M-20) Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1700, 2100 (12.8B)

Plain / Reinforced cement concrete in open foundation complete as per drawing and technical specifications (RCC Grade M-25). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1700, 2100 (12.8E)

Plain / Reinforced cement concrete in Sub structure complete as per drawing and technical specifications (RCC Grade M-25) height up to 5m. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1700, 2200 (13.5F)

Furnishing and placing Reinforced / prestressed cement concrete in super structure as per drawing and technical specifications (RCC Grade M-25). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1600, 1700 (14.1 B)

Reinforced cement concrete approach slab including reinforcement and form work complete as per drawing and technical specifications. RCC Grade M-30 (Approach slab). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1600, 1700, 2704 (14.11)

Providing and laying Cement concrete wearing coat M-30 Grade including reinforcement complete as per drawing and technical specifications (RCC Grade M-30). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 2702 (14.4)

Supplying fitting and placing Un-Coated HYSD bar Reinforcement in foundation complete as per drawing and technical specifications. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1600 (12.42)

Supplying fitting and placing HYSD bar Reinforcement in sub structure complete as per drawing and technical specifications. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1600, 2200 (13.6)

Supplying fitting and placing HYSD bar Reinforcement in super structure complete as per drawing and technical specifications. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1600 (14.2)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. 2504.2 Including all taxes But Excluding GST.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications 2706&2200(13.8) Including all taxes But Excluding GST.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. as per MoRTH specification clause No. 305(3.16) Including all taxes But Excluding GST.

Brick soling with straight overburnt bricks laid on edge including preparation of subgrade to required camber and including supply of bricks, filling joints with local earth spreading a blind coat of 1cm(3/8") depth of local earth P.I. 5 to 7 or sand over the entire surface and including labours, T&P etc. required for proper completion of work. SI-762(b) CH-5 Including all taxes But Excluding GST.

Maintenance Maintenance Charge including repair of painted surface, earthwork on patri, Jhari Cutting and As per GO/Maintenance Guidelince Annexure 1&2 etc. complete as per direction of E/I for the period of five years from the actual date of completion of work. (Excluding GST) Maintenance For First Year @ Zero % of Cost of Total Work

Maintenance Same as Item No. 43 but for Second Year @ 0.25 % of cost of total Work

Maintenance Same as Item No. 43 but for Third Year @ 0.50 % of cost of total Work

Maintenance Same as Item No. 43 but for Fourth Year @ 0.75 % of cost of total Work

Maintenance Same as Item No. 43 but for Fifth Year @ 1.00 % of cost of total Work

RAM SANEHI AND SONS (BID ID -5772240)