REPAIRS TO WOODEN FURNITURE INCLUDING RECANNING AND POLISHING TO CERTAIN FURNITURE UNDER GE(I) RndD (WEST) BANGALORE (FY 2020-2021)

Amount

Renewal of teakwood long rails of Bed plywood top (FD-246) all as shown on drawings.

Renewal of teakwood head board of Bed plywood top (FD-246) all as shown on drawings.

Renewal of plywood top of Bed plywood top (FD-246) with 12 mm thick commercial plywood of BWR grade all as shown on drawings.

Renewal of foot board of Bed plywood top (FD-246) with teakwood frame and one side teak finish plywood fixed to frame on both sides all as shown on drawings.

Renewal of teakwood bottom stiffeners of Bed plywood top (FD-246) all as shown on drawings.

Renewal of teakwood legs of Table writing (FD-249/275) all as shown on drawings.

Renewal of teakwood horizontal stiffeners of Table writing (FD-249/275) all as shown on drawings.

Renewal of drawer brass locks of Table writing (FD-249/275) all as shown on drawings.

Renewal of Front drawer made of 12 mm thick commercial plywood and laminated with 1mm thick decolam sheet (natural teak finish) on front exposed side of the drawer of Table writing (FD-249/275) all as shown on drawings.

Renewal of drawer knobs, 40 mm round, chromium plated or brass coated, natural teak colour of Table writing (FD-249/275) all as shown on drawings.

Renewal of Table writing (FD-249/275) top with prelaminated particle board, 18/19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Renewal of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224) top with prelaminated particle board, 18/19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Renewal of teakwood legs of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224) all as shown on drawings.

Renewal of teakwood side rails of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224) all as shown on drawings.

Renewal of teakwood horizontal/vertical stiffeners of Table 900 x 600 mm with or without drawers (FD-231/ 284/41/224) all as shown on drawings.

Renewal of Front drawer of Table 900 x 600 mm with drawers (FD-231/ 284/41/224) made of 12 mm thick commercial plywood and laminated with 1 mm thick decolam sheet (natural teak finish) on front exposed side of the drawer all as shown on drawings.

Renewal of drawer knobs, 40 mm round, chromium plated or brass coated, natural teak colour of Table 900 x 600mm with drawers (FD-231/ 284/41/224) all as shown on drawings. .

Renewal of teakwood front legs of Chair Dining (FD-228/279) all as shown on drawings.

Renewal of teakwood rear legs of Chair Dining (FD-228/279)) all as shown on drawings.

Renewal of teakwood rails (front, back & sides) of Chair Dining (FD-228/279) all as shown on drawings.

Renewal of teakwood stiffeners of Chair Dining (FD-228/279) all as shown on drawings.

Renewal of teakwood front legs of Chair Writing (FD-20/250/280) all as shown on drawings.

Renewal of teakwood rear legs of Chair Writing (FD-20/250/280) all as shown on drawings.

Renewal of teakwood rails (front, back & sides) of Chair Writing (FD-20/250/280) all as shown on drawings.

Renewal of teakwood arms of Chair Writing (FD-20/250/280) all as shown on drawings.

Renewal of teakwood stiffeners of Chair Writing (FD-20/250/280) all as shown on drawings.

Renewal of teakwood front legs of Chair Easy (FD-229/17(M)) all as shown on drawings.

Renewal of teakwood rear legs of Chair Easy (FD-229/17(M)) all as shown on drawings.

Renewal of teakwood rails (front, back & sides) of Chair Easy (FD-229/17(M)) all as shown on drawings.

Renewal of teakwood arms of Chair Easy (FD-229/17(M)) all as shown on drawings.

Renewal of seat, made out of 6 mm thick commercial ply wood, fixed with screws and washers of Chair W BB(FD-225) all as shown in drawings.

Renewal of Peg Table (FD-236/25(M)/277) top with prelaminated particle board, 18/19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Renewal of teakwood front / back rails of Peg Table (FD-236/25(M)/277) all as shown on drawings.

Renewal of teakwood side rails of Peg Table (FD-236/25(M)/277) all as shown on drawings.

Renewal of teakwood legs of Peg Table (FD-236/25(M)/277) all as shown on drawings.

Renewal of Table Centre (FD-235/29(M)/273/274) top with prelaminated particle board, 18/19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Renewal of teakwood front / back rails of Table Centre (FD-235/29(M)/273/274) all as shown on drawings.

Renewal of teakwood side rails of Table Centre (FD-235/29(M)/273/274) all as shown on drawings.

Renewal of teakwood legs of Table Centre (FD-235/29(M)/273/274) all as shown on drawings.

Renewal of Teapoy (FD-278) top with prelaminated particle board, 18/19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Renewal of teakwood front / back rails of Teapoy (FD-278) all as shown on drawings.

Renewal of teakwood side rails of Teapoy (FD-278) all as shown on drawings.

Renewal of teakwood legs of Teapoy (FD-278) all as shown on drawings.

Renewal of Table Dining 4 persons (FD-88) top with prelaminated particle board, 18/19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Renewal of teakwood front / back rails of Table Dining 4 persons (FD-88) all as shown on drawings.

Renewal of teakwood side rails of Table Dining 4 persons (FD-88) all as shown on drawings.

Renewal of teakwood legs of Table Dining 4 persons (FD-88) all as shown on drawings.

Renewal of Table Dining 6 to 8 persons (FD-239/273) top with prelaminated particle board, 18/19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Renewal of teakwood front / back rails of Table Dining 6 to 8 persons (FD-239/273) all as shown on drawings.

Renewal of teakwood side rails of Table Dining 6 to 8 persons (FD-239/273) all as shown on drawings.

Renewal of teakwood legs of Table Dining 6 to 8 persons (FD-239/273) all as shown on drawings.

Renewal of Teapoy Verandah (FD-208) top with prelaminated particle board, 18/19 mm thick, BWR type, exterior grade, of natural teak finish with 4 mm thick teak wood edging alround all as shown on drawings.

Removing existing unserviceable plastic cane from Chair verandah and preparing the surfaces with abrasive (amery) paper, re-caning with plastic cane, white colour, 0.40 mm thick and 3.80 mm width, of approved make, including painting the frame with one coat of synthetic enamel paint, white colour, complete all as shown in drawings and all as specified and directed.

Removing existing unserviceable plastic cane from certain items of furniture and cleaning the caning holes properly, re-caning with plastic cane, white colour, 0.40 mm thick and 1.80 mm width for weaving and 2.80 mm width for borders, of approved make, complete all as shown in drawings and all as specified and directed.

Preparation of old wooden surfaces of Bin soiled large (FD-244) with suitable abrasive paper, removing dust, dirt, filling the chipped and loose holes with bees wax, including cleaning / scrapping off, applying French polish two or more coats (till the desired finish quality is achieved), complete all as specified and directed.

All as per item no.55 but of Bed ply wood top ( FD 246)

All as per item no.55 but of Chair visitors wooden( TP)

All as per item no.55 but of Chair writing ( FD 250)

All as per item no.55 but of Chair dining ( FD 279)

All as per item no.55 but of Chair WBB ( FD 225)

All as per item no.55 but of Chair easy ( FD 229)

All as per item no.55 but of Table dining 6/8 persons (FD 239/273)

All as per item no.55 but of Stool wooden 600 mm high (TP)

All as per item no.55 but of Sofa set 5 seater ( FD 373)

All as per item no.55 but of Side board ( FD 241)

All as per item no.55 but of Table dining 4 persons ( FD 291)

All as per item no.55 but of Table writing ( FD 249)

All as per item no.55 but of Table bed side ( FD 248)

All as per item no.55 but of Table center ( FD 235)

All as per item no.55 but of Table peg ( FD 236)

All as per item no.55 but of Table dressing gents with mirror ( FD 230)

All as per item no.55 but of Table dressing ladies with mirror ( FD 251)

All as per item no.55 but of Table 900 x 600 mm with/without drawer ( FD 231/224)

All as per item no.55 but of Teapoy ( FD 232)

All as per item no.55 but of Stool dressing CB ( FD 252)

Removing unserviceable cotton newar from Charpoy newar and Bed newar (FD 227) and retapping with and including new cotton newar, 50 mm wide of approved make, at the rate of not less than 3 kg per charpoy, closely knitted on both sides complete all as shown in drawing and all as specified and directed. NOTE :- Only one joint of newar per charpoy shall be permissible. The joint shall be stitched with best cotton thread with 10 cm overlap.

Removing unserviceable broken top of Table dressing gents with mirror (FD 230) and provision of new top of size 900 mm x 300 mm made of 12 mm thick pre-laminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken bottom of Table dressing gents with mirror (FD 230) and provision of new top of size 900 mm x 300 mm made of 12 mm thick pre-laminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken back board of Table dressing gents with mirror (FD 230) and provision of new back board of size 900 mm x 120 mm made of 12 mm thick particle board, commercial type, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken drawer of Table dressing gents with mirror (FD 230) and provision of new drawer of size 290 mm x 130 mm made of 12 mm thick pre-laminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly providing 20 mm dia powder coated aluminium knob , complete all as shown in drawing and all as specified and directed.

Removing unserviceable and broken mirror of Table dressing gents with mirror (FD 230) and provision of new mirror of size 760 mm x 380 mm, 5 mm thick sheet glass duly electro-copper plated and polished, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken back side ply of Table dressing gents with mirror (FD 230) and provision of new back side ply of size 760 mm x 380 mm made of 6 mm thick plywood, commercial type, complete all as shown in drawing and all as specified and directed.

Removing the Table dressing gents with mirror (FD 230) from the wall for repairs and re-fixing the same after repairs, in same location or new location , as directed, by drilling and inserting new wooden gutties and 6 gauge screws of length 75 mm, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken top of Table dressing ladies with mirror (FD 251) and provision of new top of size 900 mm x 380 mm made of 18 mm thick pre-laminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken bottom of Table dressing ladies with mirror (FD 251) and provision of new top of size 900 mm x 380 mm made of 18 mm thick pre-laminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken back board of Table dressing ladies with mirror (FD 251) and provision of new back board of size 900 mm x 380 mm made of 12 mm thick particle board, commercial type, exterior grade, ISI marked, duly fixed with 4 mm thick teak wood edging, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken drawer of Table dressing ladies with mirror (FD 251) and provision of new drawer of size 290 mm x 130 mm made of 18 mm thick pre-laminated particle board with teak finish lamination on one side and the other side balancing white lamination, exterior grade, ISI marked, duly providing 20 mm dia powder coated aluminium knob , complete all as shown in drawing and all as specified and directed.

Removing unserviceable and broken mirror of Table dressing ladies with mirror (FD 251) and provision of new mirror of size 1220 mm x 366 mm, 5 mm thick sheet glass duly electro-copper plated and polished, complete all as shown in drawing and all as specified and directed.

Removing unserviceable broken back side ply of Table dressing ladies with mirror (FD 251) and provision of new back side ply of size 1220 mm x 366 mm made of 6 mm thick plywood, commercial type, complete all as shown in drawing and all as specified and directed.

Removing the unserviceable and broken glass shutter complete with alround aluminium double channel of Table dressing ladies with mirror (FD 251) and provision of new glass shutter with aluminium double channel, complete all as shown in drawing and all as specified and directed.

Removal of old and unserviceable fabric and cushion of Chair dining (FD/E6/MAP/10) and providing new fabric of approved quality, design and colour costing not less than Rs.250 per metre with cushion 75 mm thick 32 density provide to the existing shape complete all as directed.

Renewal of teakwood long rails of size 1730 mm (L) x 100 mm (W) x 35 mm (T) of Sofa set 3 seater (FD-373) all as shown on drawings.

Renewal of teakwood side rails of size 750 mm (L) x 100 mm (W) x 35 mm (T) of Sofa set 3 seater and single seater (FD-373) all as shown on drawings.

Renewal of teakwood Arms of size 750 mm (L) x 70 mm (W) x 35 mm (T) of Sofa set 3 seater (FD-373) all as shown on drawings.

Renewal of teakwood long rails of size 700m (L) x 100m (W) x 35m (T) of Sofa set single seater (FD-373) all as shown on drawings.

Renewal of teakwood Battens of size 600 mm (L) x 50 mm (W) x 20 mm (T) of Sofa set 3 seater and single seater (FD-373) all as shown on drawings.

Renewal of TV Trolly (FD/E6/Map/6 (R) top/ bottom with prelaminated particle board of size 600 X 650 X 19 mm tk, BWR type, exterior grade of natural teak finish with 4 mm tk teak wood edging around all as shown in drawings

Renewal of TV Trolly (FD/E6/Map/6 (R) side both sides with prelaminated particle board of size 600 X 750 X 19 mm tk, BWR type, exterior grade of natural teak finish with 4 mm tk teak wood edging around all as shown on drawings

Renewal of TV Trolly (FD/E6/Map/6 (R) front glass of size 750 X 650 X 6 mm tk, with all sides polish granding and assy of pin type hinges and magnetic lock and all as shown on drawings.

Renewal of Table bed side (FD/E6/Map/15 (R) top with prelaminated particle board of size 450 X 450 X 19 mm tk, BWR type, exterior grade of natural teak finish with 4 mm tk teak wood edging around all as shown on drawings

Renewal of Table bed side (FD/E6/Map/15 (R) drawer with prelaminated board of size 450 X 100 X 19 mm tk, BWR type, exterior grade of natural teak finish with 4 mm tk teak wood edging around all as shown on drawings

Renewal of Table bed side (FD/E6/Map/15 (R) drawer with prelaminated board of size 450 X 350 X 19 mm tk, BWR type, exterior grade of natural teak finish with 4 mm tk teak wood edging around all as shown on drawings

Renewal of Computer table (FD/E6/Map/03) top with prelaminated particle board of size 900 X 600 X 19 mm tk, BWR type, exterior grade of natural teak finish with 4 mm tk teak wood edging around all as shown on drawings

Renewal of Computer table (FD/E6/Map/03) side with prelaminated particle board of size 150 X 7500 X 19 mm tk, BWR type, exterior grade around all as shown on drawings

Renewal of Computer table (FD/E6/Map/03) drawer with prelaminated particle board of size 350 X 100 X 19 mm tk, BWR type, exterior grade of natural teak finish with 4 mm tk teak wood edging around all as shown on drawings

Sreyas Enterprises

Annu Enterprises