GES/PKT/T-48/2019-20 Certain repair to roof treatment plumbing work, sunken floors, tiling of toilet, bathroom, flooring, sewage lines and drainage system at Mirthal area under GE (South) Pathankot.

Amount

M&L for taking out and cleaning of existing roof treatment of any description completely and washing, rubbing with water and providing 20mm thick cement plaster in cement mortar 1:3 mixed with and including water proofing compound @ 3% weight of cement, finisheed even and fair without using extra cement to receive water proofing treatment. (The rate includes for fillling of crackes in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster) complete all as specifed and directed.

M&L for providing and laying of water proffing treatment on roof with APP modified prefabricated five layer 3mm thick water proofing membrane, super thermolay with non woven polyester mat reinforcement of 160gsm, weight of membrane @3.6 Kg/Sqm over a solvent based bitumen primer, Primer @0.30 Ltr/Sqm by same manufacturer conforming to IS: 3384-1986. The membrane shall be laid uing butane torch. The end lap should be 100mm and the side lap must be minimum 75mm. The membrane shall be first laid up to the parapet wall junction and then shall be overlaped with another memberane (flashing) with an overlap covering upto a distance of 300mm. In case parapet height is less than upto 500mm, membrane shall be terminated at the top of parapet. All rain water pipes opening shall be suitable sealed with APP membrane. ( The rate uncludes for fillling of crackes in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster complete all as specifed and directed.

M&L 25mm thick, PCC 1:2:4 , type B0 using 12.50mm graded crushed stone aggregate as in roof padding complete all as specifed and directed.

M&L PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) complete all as specifed and directed.

S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:10 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand over 10mm thick rendering in cement mortar 1:4 mixed with liquid water proofing admixture of approved brand complete all as specifed & directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specifed and directed.

M&L Glazed ceramic coloured tiles of size 450mmx300mmx7mm to 8mm thick on vertical surfaces of walls such as skirting, dado etc laid over and including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:6 complete all as specifed and directed.

M&L Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, laid over and including screed bed 15 mm thick in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580mm x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' or 'S' trap complete incl making good to floor complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin white of bowl size 550x400mm including waste coupling and waste pipe PVC 32mm dia to be fixed over mild steel bracket including 15mm bore pillar tap brass chromium plated with capstan head screwed down high pressure, with or without lettered Hot or Cold complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated, brass ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs 15mm bore, stop valve/Angle valve fancy type chromium plated brass ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair pillar tap brass with capstan heads chromium plated fancy type screwed down high pressure with or without letterd hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union complete all as specified and directed.

S&F in repair brass CP mixer 15mm dia for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (medium weight 300 gms) complete all as specified and directed.

S&F in repairs 15mm bore PTMT tap long body any colour high pressure screwed for iron pipe (Min wt 15mm-110 gms) complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia D type, 60cm long between flanged fixed in repairs complete all as specified and directed.

S&F in repair Grating square fittings of size 150mm of PTMT (Minimum weight 100 gms) complete all as specified and directed.

S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed.

Taking down steel tubing and connections, incl cleaning for re-fixing or removal, 15 mm bore pipe complete all as specified and directed.

M&L galavanised tube med grade with fittings and fixed complete to walls and ceilings or laid in floors, bore of pipe 15mm, complete all as specified and directed.

Taking down steel tubing and connections, incl cleaning for re-fixing or removal, 20mm bore pipe galavanised complete all as specified and directed.

M&L galavanised tube med grade with fittings and fixed complete to walls or laid in floors,bore of pipe 20 mm complete all as specified and directed.

S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces in any description etc incl raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement as in ceiling etc complete all as specified and directed.

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer including applying curing after each coat complete all as specifed and directed.

M&L Preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L Two coats of oil bound distemper over a coat of primer on walls white or tinted on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

Disconnecting existing tanks, setting side for repairing cleaning and removing all scale and dirt etc. from tanks and from mouths circulaing pipes and housting in same position of capacity upto and including 500ltrs and endorsed the word "CLEANED WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, Tee, Socket, Nipple of any size complete all as specified and directed by Engr-in-Charge

Dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing complete all as specified and directed.

S&F, Rotational moulded polyethelyne water storage tank three layer (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethelyne float and fly nuts complete all as specified.

S&F in repair 20mm ball valve PTMT high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specifed and directed.

S&F in repair 20mm stop valve cast copper alloy butterfly handle screwed down high pressure screwed for iron pipe or brass ferrule and fixed complete all as specifed and directed.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness ( below or above ground level) complete all as specifed and directed.

M&L for Machine pressed precast concrete interlocking paver block (Factory made rubber moulded) with grey cement and pigment any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 Grade fixed complete all as specifed and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specifed and directed.

M&L for chequered cement concrete tile 30cmx30cmx25mm thick with grey cement and no pigment set, jointed and pointed in neat cement slurry laid over and including incl 20mm thick screed bed with CM 1:6 complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base finished even and fiair complete all as specifed and directed.

M&L 75mm thick plain cement concrete type C-2 1:3:6 (using 40mm graded crushed stone aggregate) as in flooring, plinth protection, finishing the concrete surfaces even and fair without using extra cement complete all as specifed and directed.

Dismantling timber scantling ( Framed work) 40 Sqcm and over in section, in any position complete all as specifed and directed.

Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheet in roof covering complete all as specifed and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridges to wall, fixed with self tapping screws (AS-3566 class-iii) complete . Sheet colour approved by Engineer- in -Charge complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridging to wall, fixed with self tapping screws complete all as specified and directed.

S&F fibre glass reinforced translucent corrugated sheeting 2mm jthick with two corrugations side lap fixed with L type or J type cranked hook bolts in lieu of screw complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, rafters rails and fastenings and heavy bracket framing (beem, tee, angle, channel or flat sections) including distance pieces, cleats etc of FE 410 W (Gde E-250) quality B including one shop coat of red oxide primer complete all as specified and directed.

S&F in repairs 15mm bore stove valve brass chromium plated with long shank concealed type ISI marked with crutch butter fly handle high pressure screwed down complete all as specified and directed.

S&F in replacement PVC (SWR) trap plain with grating including jointing with solvent cement suitable for 100mm dia outlet and jointing to waste pipe in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in replacement 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in replacement 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in replacement 100mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F in replacement 75mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F in replacement 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints fixed to walls with clamps complete all as specified and directed.

S&F in replacement 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes complete all as specified and directed.

S&F in replacement 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed.

S&F in replacement 75mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each incl taking out hold fast complete all as specified and directed.

Taking down shutters of any description exc 1Sqm but n exc 2Sqm each complete all as specified and directed.

M & L 1.25mm thick pressed steel frames with one coat of red oxide primer 125mm x 60mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate complete all as specified and directed

M & L 1.25mm thick pressed steel frames with one coat of red oxide primer 105mm x 60mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, (using 20mm graded crushed stone aggregate) as in back fill of pressed steel frame complete all as specified and directed.

S&F 35mm thick plain framed factory made panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated wood is to be incorporated complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secring glass,etc size of members of shuters as specified in SSR Part-I,Section 8, clause 8.24 (a) complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube complete all as specified and directed.

S&F factory made solid PVC door shutter, 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2mm moulded prelam PVC sheet on on the front face and 2mm plain colour PVC sheet on back face with wood free EPS complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for Two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces including preparation of surface complete all as specified and directed.

S&F mild steel, butt hinges 100mm, cold rolled medium weight complete all as specified and directed.

S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm long aluminium tower bolts (ISI Marked) extruded type complete all as specified and directed.

S&F in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F 300mm long Mild steel sliding tower bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate complete all as specified and directed.

S&F Steel windows /ventilators with tubular frame factory made with double shutter (wire gauged shutter & glass glazed shutter, wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long including one shop coat of red oxide primer complete all as specified & pattern shown in drg No CEPZ/ID-245/01 and 246/02 sheet ½ & 2/2.

S&F Mild steel framed work such as grills, gratings using square/round bar with ends of bars shoulders/welded drilling holes for fixing of guard bars including one shop coat of red oxide primer complete all as specified and directed.

M&L for Preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F in repair pillar tap PTMT any colour screwed for iron pipe 15mm bore complete all as specified and directed.

Hacking out old brocken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, gazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for one coat of white wash on ceiling incl preparation of old plastered surfces complete all as specified and directed.

M&L for one coat of oil bound distemper to old plastered surfaces including preparation of surfaces complete all as specified and directed.

M&L for one coat of oil bound distemper to old plastered surfaces on ceiling including preparation of surfaces complete all as specified and directed.

Material & labour for applying one coat of synthetic enamel paint on wooden surface on any description not otherwise described over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

Material & labour for applying one coat of synthetic enamel paint on steel surface on any description not otherwise described over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

M&L for complete removal of existing treatment from internal surfaces of walls by wire brushing and washing, rubbing down and stopping of surfaces and leveling/edging of the disturbed planes/edges by using wall putty 2 to 3 mm thick on vertical surfaces of bricks/concrete walls finish to even and smooth with two layers of screylie wall putty and applying two coats of oil bound destemper over one coat of asian primer incl preparation of corner/edges jambs of openings to true vertical and horizontal lines complete all as spd and directed by Engr-in-Charge.

M&L for complete removal of existing treatment from internal surfaces of ceiling by wire brushing and washing, rubbing down and stopping of surfaces and leveling/edging of the disturbed planes/edges by using wall putty 2 to 3 mm thick on ceiling surfaces of bricks/concrete finish to even and smooth with two layers of screylie wall putty and applying two coats of oil bound destemper over one coat of asian primer including preparation of corner/edges to true vertical and horizontal lines complete all as spd and directed by Engr-in-Charge.

S&F in repair mild steel curtain rods 32mm dia pre-laminated synthetic enamel paints of wooden finish fixed with screws complete all as specified and directed.

S&F in replacement wooden (tunned weathered and mitred) brackets of 1st class hard wood pre polished with French polish and touch wood without hole suitable for 32mm dia rod fixed with screws and gutties in wall as approved complete all as specified and directed.

All as per item srl item no.98 above but end caps with wall ornament and fixed to curtain rod with screw of design /shape as approved and directed by Engr in Charge complete all as specified and directed.

Material & labour for one coat of cement base paint including preparation of old surface and curing after each coat to match the shade as per colour scheme complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M & L for cement concrete 1:3:6 niminal mix type C2 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Dismantling/Taking down old damaged SGSW pipes from existing lines including old Cement concrete/ bed complete all as specified and directed.

M&L for Concrete bed in cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate to drain pipes of bore 150mm including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F UPVC underground drainage pipe (UDS) type 'B' 160mm dia with wall thickness 4mm (min) and pressured 4 Kg / mtr Sq jointed in cement solvent complete all as specified and directed. Make : Jain Pipes/Ajay Flow guard/Finolex/Supreme.

Providing precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone agg, as in cover slabs (for septic tanks, manholes) and similar articles including necessary moulds/form work set in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for cutting into existing manholes for connecting new drains making good to pipe and rendering cutting our existing benching for forming branch channel (1/2 round or 3/4 section) in cement concreete 1:2:4 type B-1 (using 20mm graded crush stone aggragate) smooth finished and reforming benching as reqd for 150mm internal dia of pipe complete all as specified and directed.

Extra for forming fair finished drain or channel 90cm inner girth in cement concrete using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in suface channel and drains finished even and fair without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, side filling and mass concrete including necessary form work complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Sch of Credit = 50175.00

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

JAGIR CONSTRUCTION CO

M/s. G M Builders & Contractors

M/s Aman Enterprises

M/S Ajay Kumar Mahajan

malghotra construction co