Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 4 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹84.5 L
EMD Value
₹1.7 L
Closing Date
21 Jul 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Office of Executive Engineer REW Bpr
Office of Executive Engineer REW Bpr
CONSTRUCTION OF BLOCK DEVELOPMENT COUNCIL OFFICE AT BONKOOT BLOCK BONKOOT
2022_RDPR_179285_1
NIT 42
Open Tender
Civil Works
Item Rate
BANDIPORA
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,000
Rural Development and Panchayati Raj
₹1.7 L
22 Jul 2022
16 Jul 2022
22 Jul 2022
16 Jul 2022
21 Jul 2022
16 Jul 2022
120 days
Amount
Earth work in bulk excavation by mechanical means(hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (exceeding 30 cms in depth, 1.5 mtr in width as well as 10.0 sqm on plan) including disposal of surplus excavated earth as directed by Engineer-in-charge (incl dewatering if required): All kinds of soil :
P/L of quarry stone soling hand packed including ramming, watering & filling of interstices all costs and carriages involvedCOMPLETE Including all carriages and costs of materials involved complete job
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages costs of material involved Including all carriages and costs of materials involved complete job
Supply and filling of RBM under rooms including compaction by ramming watering etc including all costs and carriages of materials involved COMPLETE
Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. i 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) iIncluding all carriages and costs of materials involved complete job
Reinforced concrete work in beams,suspended floors,columns,roofs having slope upto 15degree ,landings,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases ans spiral stair cases upto floor v level incl. Curing but excluding the cost of centring,shuttering,finishing and reinforcement with 1:1.5:3 (1,cement:1.5 coarse sand,3: graded stone aggregates 20mm nominal size) Including all carriages and costs of materials involved complete job
P/L of in position cement concreteof specified grade including curing but excluding the cost of centring and shuttering all works upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all carriages and cost of Materials involved
Centring and shuttering including strutting,propping etc and removal of form forFoundations: footings,bases of columns etc for mass concrete strip raft for mass concrete
Centring and shuttering including strutting,propping etc and removal of form foruspended floors, roofs , landings , balconies ,and platform,slabs etc
Centring and shuttering including strutting,propping etc and removal of form forLintles,beams,plinth beams,girders,bressumers and cantilevers . Plinth beams,lintle beams etc
Centring and shuttering including strutting,propping etc and removal of form forcolumns,pillars,piers,abutments,posts and struts
Centring and shuttering including strutting,propping etc and removal of form forEdges of slabs and breaks in floors and walls under 20cm wide
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D Including all carriages and costs COMPLETE
Brick work with common burnt clay (nom-modular)bricks of class designation 7.5 in super-structure above plinth level upto V floor incl. curingfoundation and plinth in cement mortar (1:6) mix ratio (1:cement 6:coarse sand)lncl extra cost for super structure and Including all carriages and costs of materials involved COMPLETE
Providing wood work in frame (chowkhats) of door , window , clerestory window and other frames wrough, framed and fixed in position in hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separetly.) (Imported KD .wood ) i/c . All carriages, Leads & Lifts of Materials complete.
Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6(1: cement, 3:coarse sand,:6 graded stone aggregates 20mm nominal size)
Providing / Fixing of Panalled or panalled and glazed shutters for windows , doors and clerestory windows fixing with M.S. butt hinges with necessary screws excluding panelling which will be paid for separately all complete as per directions of Engineer-in-charge First class imported kail wood (35mm thick) i/c . All carriages, Leads & Lifts of Materials complete.
Providing / Fixing of Panalled or panalled and glazed shutters for windows , doors and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) panelling for panelled or panelled and glazed shutters 25mm to 40mm thick first class imported kail wood
Providing / Fixing of glazed shutters for doors and clerestory windows using 4mm thick float glass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws .First class imported kail wood shutters 35 mm thick
Providing and Fixing 3.5mm glass including cost and fixing wooden fillets/beeding of required size and shape with nail including all carriages complete
Providing / Fixing 35mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4m in both directions of wire 0.63mm for doors,windows and clestry windows with ISI marked M.S. pressed butt hinges bright finish of required size necessary screws as per directions of EIC ist class imported wood
P/F of hardware fittings of approved quality HANDLE 5'' Al (75 NO.) , HANDLE 8'' fancy type (30 NO.), T-bolts 4''(150 NO.), T-Bolts 6'' (50 NO.) ,DOOR Al DROP WITH LOCK Link/Ramson 12"(6NO.), DOOR Al DROP WITH LOCK Link/Ramson 10''(15 NO.), DOOR-STOPPER (25 NO.) & STAY-HOOK 5'' (115 N0.)
P/F of stainless steel (Grade 304)railing made of Hallow tubes channels,plates etc incl. Welding,grinding,buffing,polishing and making curvature(wherever required) and fitting the same with necessary stainless steelnuts & bolts completei/c fixing the railing with necessary accessories and stainless steel dash fasteners,stainless steel bolts etc Of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of EIC (for payment purpose only weight of stainless steel members shall beconsiderd excluding fixing accessories such kilogram as nuts,bolts,fasteners etc incl. lifts,carriages of the material complete job
P/L Antiskid vitrified floor tiles in different sizes(thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS:15622 Of approved make,in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) incl. grouting the joints with white cement and matching pigments etc. complete size of tiles 300mm x 300mm
P/L vitrified floor tiles in different sizes(thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS:15622 Of approved make,in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) incl. grouting the joints with white cement and matching pigments etc. complete size of tiles 600mm x 600mm
P/F of Ist quality ceramic glazed wall tiles conforming to IS;15622(thickness to be specified by the manufacturer)of approved makein all colours and shades,laid on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) 7 jointing with grey cement slurry @ 3.3kg/sqm, including pointing in white cement mixed with pigment of matching shade complete (300mm x 450mm)
P/F of gangsaw cut,mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters,window sills,facias,staircase riser & similar locations, of required size approved shade colour and texture laid over 20mm thickbase of cement mortar 1:4 ( 1 cement: 4 coarse sand) joints with white cement and matching pigments, epoxy touch upsincluding rubbing,curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade incl skirting wherever required (18mm thick)
Providing edge moduling to 18mm marble stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. Complete asper design approved by EIC (Granite work) Double moulding
Provinding and casting of 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) Including all carriages costs of material involved
Providing /applying of white cement based putty of 2mm thickness over plastered surface of approved brand and manufacture to prepare the surface even and smooth complete.
Applying priming coats with primer of approved brand and manufacture having low VOC ( volatile organic compound content. With water thinnable cement primer on wall surface having content less than 50 grams/litre
Wall painting with premium acrylic emulsion paint of interior grade having low VOC (volatile organic compound) content. Less than 50gram/litre of approved brand and manufacture i/c applying additional coats whever required to achieve even shade and colour(two or more coats)
Finished walls with textured exterior paint of required shade on New Work (two or more coats applied @3.28litre/10sqm) over and including base coat of exterior primer applied @ 2.2kg/10sqm
Applying priming coats with ready mixed pink or grey primer of approved brand and manufacture on wood work(hard and soft wood)
Painting with syntethic enamel paint of approved brand and manufacture of required color to give an even shade two or more coats on new work
Steel work welded in built up sections/ framed work including cutting, hosisting , fixing in postion andapplying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.i/c . All carriages, Leads & Lifts of Materials complete
Providing and Fixing percolated galvanized iron profile sheets (size,shape and pitch of corrugation as approved by E.I.C.) 0.50mm (+0.05%) total coated thickness with zinc coating 120grams per sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both sides of the sheets and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by E.I.C. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizental/verticle or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including all lifts,leads and carriages complete job
providing and fixing of mild steel round holding down bolts with nuts and washers plates complete
Providing ridges or hips of width 60cm overall width plain G.S. Sheets fixed with polymer coated J or L hooks,bolts and nuts 8mm dia. G.I. Limpet and bitumen washers complete (0.63mm thick with zinc coating not less than 275 gram/sqm)
Providing valley of 90cm wide overall in plain G.S. Sheets fixed with polymer coated J or L hooks,bolts and nuts 8mm dia. G.I. Limpet and bitumen washers complete (1 mm thick with zinc coating not less than 275 gram/sqm)
Providing and fixing of plain eves boarding 2nd class kail wood 300x40mm (nominal size) complete job
Providing and bFixing of soffits made out 12mm thick imported wood planks incl underneath frame work and scaffolding carriage complete (Badloo wood)
Dry random rubble stone masonry with hard stone in foundation and plinth: With bond stone Including all carriage/headloads and cost COMPLETE
SAINTRY AVProviding and fixing Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings & fixtures,seat cover etc with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
Providing and fixing stainless steel A ISI 304 (18/8) Kitchen Sink as per IS : 13983 with CI bracket and stainless steel plug 40 mm including painting of fittings and brackets ,cutting and making good the walls wherever required: Kitchen sink without drain board 610x510 mm bowl depth 200 mm (Assume for pantry
providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer-in-charg 32 mm dia
Providing Sink mixer (wall mounted) with 170mm long swivel spout connecting legs and wall flanges((CERA Cat. No. OCEAN F3002501 or approved equivalent) .
Providing and fixing Braided Hoses with Two 15mm CP Brass Nuts & Rubber Washers Without Nipple (Suitable for Geysers and basins) of 15mm Nominal bore
Providing and fixing toilet paper holder : CP Brass
Providing,Fixing,testing and commissioning of CP brass twin coat hook with concealed screws.
Providing and Fixing Health Faucet 15mmdia with CP flush pipe, CP nozzel hook complete including CP flange etc.
Providing,Fixing,testing and commissioning of CP brass towel ring hook with concealed screws.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (a) 15 mm nominal bore
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
Providing and fixing horzontal/vertical Hot water geyser made of MS body with copper jacket inside with necessary inlet, outlet, drain, overflow, vent and all safety accessories etc. complete including cutting and making good the walls, wherever required. a) 50 litr for Kitchen(For small toi. And pantry.)
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
Providing and fixing C.P. brass/ SS long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
SOIL WASTE VENT and RAIN WATER PIPES Providing and fixing UV stabilised UPVC pipes, Type B as per IS:13592 for soil, waste, rain water and vent, including all fittings with or without access i.e Clean out plug,bends, junctions, cowls, offsets, couplers, connectors, heavy duty Metal pipe clamps with rubber seal/clips//holders etc. and jointing with heavy duty solvent cement, complete as per manufacturer's specifications and making good the same, complete as directed by the Engineer-in-Charge. (vertical pipes can be jointed through rubber O rings) Inclouding cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate, 20 mm down gauge) 75 mm in bed and all around soil and waste pipes under floor, including shuttering and centering for: - 100mm dia
Providing and fixing proprietary polyshield outer mechanical protection ON nitrile rubber insulation comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material (resin & hardner) as per manufacturers specification and approved by Project Manager / Consultants.. (Location- Inside The shsft and open to sky pipe only) 100mm dia.(50mm thick insulation)
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 12.55.1 100mm dia pipe
Providing and fixing multi inlet uPVC floor trap with minimum 50mm water seal of self cleaning design with 110 mm outlet consisting of all necessary fittings and provding strainer of 150 x 150 mm square stainless steel 2 mm thk frame with slotted lockable grating on top of the trap level matching the level of floor finish etc, complete including cost of cutting and making good the walls and floors wherever required and as directed by Engineer in charge. (The inlet diameter shall be 32mm, 40mm or 50mm as per site requirements) 100 mm inlet and 100 mm outlet
Providing and fixing uPVC pipe as per IS 4985, Class-3, 6Kg/cm2 with cement solvent joint, complete with all fittings and clamps etc including cutting and making good the walls and floors for waste pipes from wash basins, urinals, sinks & balcony drainage, as directed by the Engineer-in charge. (a) 32 mm nominal bore
(b) 40 mm nominal bore
(c) 50 mm nominal bore
Providing and fixing SS grating with frame including fixing to the floor with cement mortar. (a) 125mm x 125mm
Providing and fixing floor drain points formed out of 100 X 50mm dia reducing elbow embedded in floor,all completein all respect as directed
INTERNAL WATER SUPPLY Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : Concealed work including cutting chases and making good the wall. 15 mm dia nominal bore
20 mm dia nominal bore
Providing and fixing PE-RT(Poly Ethylene for raised Temperatures) Part 2 pipe having thermal stability for hot and cold water supply(-40 to 95 dC Temperature.), including all PE-RT plain and brass threaded(Near Tap ) fittings, including fixing i/c fixing the pipe with clamp at 1.0M spacing. this include joints of pipes with electro fusion method and the cost of cutting chases making good the same includind testing of joints complete as per direction of engineer in charge.(Make- Georg Fischer, and Equivalent.) - Exposed on wall/terrace i 20 mm dia. nominal bore
ii 20 mm dia. nominal bore
iii 20 mm dia. nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore
25 mm nominal bore
32 mm nominal bore
Providing and fixing proprietary polyshield outer mechanical protection ON nitrile rubber insulation comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material (resin & hardner) as per manufacturers specification and approved by Project Manager / Consultants.. Exposed on wall/terrace 16.2.14 25 mm dia(19 mm thick insulation)
16.2.14 25 mm dia(19 mm thick insulation)
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm dia nominal bore
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS :2373 80 mm dia
Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory. 80 mm diameter C.I. pipe
Providing and fixing of approved make float operated ball valve with Brass/copper heavy duty float confirming to IS 9762 & other associated accessories & works etc., complete. For 80mm dia pipe
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
P/F of pvc coduits for electrical wiring and fan, lighting points etc for electrical fittings etc to be paid as per vochur/ directions of EIC and other unforseen items
P/L and installation of granite ineguration board plus photographs etc complete job as per directions of EIC
M/s Nuh Construction and Manpower Services Private Limited
SINDH CONSTRUCTIONS
M/S GHULAM NABI PARAY
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .