Estimate for providing 24 by 7 water supply to Patiala city by Rehabilitation of Patiala Navigation Channel 0-80 and Rehabilitation of Patiala Navigation Channel at Rd 80-15800 with concrete lining at Rd 254300/L of Bhakhra Main line.

Amount

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil in ordinary soil (B) Mechanical means (b) depth 3m to 6m

Compaction (i) Extra for laying earth/fly ash as per specifications in 20 cm. Layers and dressing but excluding cost of rolling.

(ii)Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.

(iii) Extra for rolling to specifications

Laying cement concrete 1:3:6 with shingle including supply carriage, laoding and un-loading of material complete in all respects as per PWD specifications.

Laying cement concrete (1:2:4 ) M-15 including material , carriage, loading and un-loading of material complete in all respects as per PWD specifications.

Laying cement sand mortar in 1:2 including supply carriage loading and un-loading of material complete in all respects.

Supply of Structural steel ISMB, ISMC, ISA, Square bar of required length and sizes of reputated brands to the site of work like SAIL, TATA, VIZAG, JINDAL installing of gate by cutting, strengthening charges including

Providing and supply of (MS) plate/end plate/retainer /column base plate/column top plate/ guide plate/stiffner plate/ back plate/bearing plate/web plate of required length and sizes of reputated brands to the site of work like SAIL, TATA, VIZAG, JINDAL installing of gate by cutting, strengthening charges including alignment of gates complete in all respects to the satisfaction of Engineer in charge.

Providing and fixing of CSK screw with nut and washer

Providing and fixing of MS j bolt with nut and washer

Providing and fixing of MS rod

Providing and fixing of MS pipe (supply and fixing of spindle cover CR 63)

Providing and supply of S.S plate as per drawing and direction given by Engineer in charge

Drilling , fixing and providing anchor bolts as per drawing and direction given by Engineer in charge

Providing chequered plate 6 mm CR 44

Providing of hollow bulb seal and fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge

Providing and fixing in position of flats/wedge seal including preparation of surface complete Engineer in charge 80 mm dia. x 12 mm th.

M.S spindle with double start or triple start or threading 11’ height 1/3/4” dia. Complete up to 1.5 ton capacity

C.I housing cover with worm and worm wheel assembly, shaft, handle, G.M, burst with triple start thread and side for spindle complete including labour charges.

Gate wheel assembly complete in all respects and to entire satisfaction of Engineer in charge 180 dia.

Commissioning and testing of gates at sites complete in all respects and to entire satisfaction of Engineer in charge.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Providing fixing of locking arrangements including locks

Supply of multipurpose synthetic grease complete in all respects and to entire satisfaction of Engineer in charge.

Supply of multigrade mobil oil 10W-40 or 10W- 50

Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marekd as per IS code IS 458-2003 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc (c)R.C.C. Pipe NP -3 (q) 1600 mm i/d pipe

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads Disposal/carraige from 0 upto 450m

Supply of Skin Plate

Welding by gas or by electric plant, including carriage to and from workshop

ONKAR SHARMA CONTRACTOR