MLA Scheme 2024-25 Minipower pump Sethiyathope TP

Amount

Geo-Physical Survey Charges

Drilling of 4 1/2" Diameter Borewell By Using Calxy Drill Including Transporting Charges And Insertion Of Casing Pipes (Excluding Cost Of Casing Pipes)

Reming From 6'' Pilot Bore to 12'' Size Bore As Directed By The Twad Board Officers. Towards cost and supply of 150 MM dia PVC Casing pipe from app. Company including of all charges etc.

a) 150 mm PVC Plain Casing pipe (CM)

b) 150 mm PVC Slotted Casing pipe (RS)

c) 150 mm PVC end Cap

Charges for developing the borewells with air compressor of 300 CFM capacity ( min 8 Hrs ) including transportation labour and fuel charges for compressor and conduct the yield test by v notch method

Cost and supply and and Fixing of 1000 lit capacity HDPE PVC Polymer tank from approved company including cost and conveyance of all materials to work site and all labour cjharges etc complete

Supply and delivery of single phase 1.5 HP (30lpm x 50 M)pump set with motor as per ISI , 15 lpm x 70m head with Minimum One Year Guarantee and other inciential charges etc,Complete as per Standarad Specification.

1.5HP Single Phase Banel Board other inciential charges etc,Complete as per Standarad Specification. Supply and delivery of following pipes & specials etc,Complete as per Standarad Specification.

2.5 mm flat copper submersible cable

50 mm HDPE Hose for encasing cable

32 amps porecelain fuse unit

32 amps Metal Clad mcb Switch

M.S Box with completed Lock & Key Arrangements with paintings

Bore Cap Using M.S Flat M.S Sheet on Top with Bolting Arrangements

25mm GI Pipe

25 mm GI Elbow Heavy

25 mm GI Union Heavy

32 mm GI Clamp set

20 mm Screw down Tap

Construction of pedastal including supply and Fixing of Ms Kisok etc Complete as per standard specification.

Supply and run of 2 of 6 sqmm ( 56/0.3) PVC insulated SC unsheathed conductor of 1100 V garde on 7/20 GI bearer wire for service connection mains (Run off ) etc. complete as per standard specification

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10

36W CFL Light Fitting including of all Charges etc.

V.BASKARAN (BID ID -1253823)