Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹12.5 L
EMD Value
₹12,500
Closing Date
23 Nov 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Block Development Officer(BP) Sholinghur Block
Block Development Office, Sholinghur Block
Construction of PDS Shop(Type-I) at Gangapuram H/O Vengupattu Panchayat at Sholinghur Block Under MLACDS for the year 2023-24
2023_RDTN_390089_1
Rc.No. A4/2444/2023 Dated 30.10.2023
Open Tender
Civil Works - Buildings
Lump-sum
120 days
Gangapuram
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹12,500
Yes
23 Nov 2023
17 Nov 2023
23 Nov 2023
17 Nov 2023
23 Nov 2023
17 Nov 2023
Amount
Earth work excavation in all classes of solls except hard rock requiring blasting on bank with initial lead of 10M and lift of 2M including all labour charges and incidental charges such as shoring, strutting, providing coffer dams, balling out of water etc., in SDR Soil-1st depth
Supplying and Filling foundation and basement with filling sand in layers not more than 2 15cm. Thick well rammed, watered and compacted Complete complying with standard Specification
Cement concrete 1:4:8 mix using 40mm HBG metal for foundation including watering 1 wherever necessary and laid in layers of not more than 15cm thick, compacting etc. complete complying with standard specifications and as directed.
Filling in Basement with well gravel in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.
Brick work in CM 1:5mix using country bricks ground molded of size 23 13 x 7cm for the following including curing etc., complete complying with standard specifications
For Foundation and basement
For Superstructure in ground floor
Supplying and Fabricating and placing in position M5 steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. Complete complying with standard specification
Supplying & Erecting centering for sides & soffits including necessary supports & strutting up to 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 8mm for boarding laid over silver oak joists Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casuarinas props of 10-13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers, Hate for 10m2 for the following items
Below GL
Above GL
Centering for Grade beam
Centering for Lintel
Centering for Sunshade
Centering for Roof Beam slab
Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding A cost of Rein forcemeat and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick and with Kraft paper without claiming extra as directed by the departmental officers complete complying with standard
For Foundation and basement
For Superstructure in ground floor
Finishing the top of the roof with one course of Machine Pressed Tiles of size 20 cm x 2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to 155 by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide, etc., complete complying with standard specification
Finishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facial, canopy slab, staircase waist stab, landing slab etc., with CM 1:3, 10mm thick. including 12 raking the surface. The rate in to include the cost of providing cement mortar beading or nosing for sunshades & staircase steps, landing slabs etc., complete complying with standard specifications.
Plastering with CM 1:5,12mm thick, over the cement concrete for floor finish including 13 curing etc., complete complying with standard specifications and as directed by the departmental officers
Cement concrete 1:2:4 mix using 20mm HBG metal for foundation including watering 14 wherever necessary and laid in layers of not more than 15cm thick, compacting etc. complete complying with standard specifications and as directed
Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed 15 Anti skid tiles (20mm thick) in CM 1:3, 20mm thick complying with the standard specifications and as directed by the departmental officers.
Dadoping of walls with colour printed glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc Complete 6.65
Distempering two coats with best approved all bound distemper including cost of painting 17 priming coat over new plastered surface and conveyance of all materials to site and all
Exterior Emulsion Two coats over priming coat including cost and conveyance of all materials and labor charges etc complete.
Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc, with best approved best quality of synthetic enamel paint of approved color over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers
Supplying and fabrication of the following rolling Shutters including cost and conveyance and all charges etc complete.(Manually Operated)
Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x5mm are used for the outer frames and MS. angles of site 35x35x6mm for the shutter frames stiffeners with 32x 6mm M.S fat is provided at required intervals in the shutter frame. 18-gauge CR sheet laid as panel in the shutter and welded intact. MS. flat 18x5mm is welded over the 32x 6mm M.5. flat sandwitching the CR. sheet in between additional stiffeners with 185mm M.5 fat is provided diagonally
Supplying and foxing PVC sliding door with Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter 22 using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45men, with suitable rahate for housine the shutter including
Fabricating, Supplying and fixng in position of steel sheeted windows (Two Leaves) with the following specifications. Outer frames of windows made of 2 section F7D of size, 33 x 25 x 3mm at 1.419 kg/m and mullion 'T' section (F48) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in 15 7452/1990. Each openable shutter should not exceed a width of 600mm to enable 23 separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same M5 flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly
Fabrication, supply and fixing in position of 'N' type ventilators using M.S. angle of size 25 x 25 x5 mm for frame and M.S. Flat of size 20 x3 mm for foxing the weld mesh and using 25x22x3 mm T section for frame glass. Special type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fxing the weldmesh 25mm square including
Supply and fixing of 15 A Aerial Fuse unit (500A) unsuitable 100 x 100 Teak Wood Board Concealed box Using Clamps SD-128
Supply and fixing of 16 Amps DPIC switch of 500V grade with Fuse and Neutral on suitableTW. board with painting of suitable color with PWD Earthling (SD No.154)
Supply and run of 2 of 6 sq. mm (84/0.30) polythene insulated and PVC unsheathed SC 27 Alu cable of 1100 Von 7/20 Gi bearer wire for Service Connection Main- SD.64
Supply and run of 2x1.5sq. Mm(22/.3) PVC insulated SC unsheathed CU. Conductor of 28 1100Grade in 25mm Dia GI PIPE (Glass"B")suitably Bent at both ends with necessary angle ron upright and end supports for Mains SD 69
Supplying and fixing of CFL including all cost and conveyance to work site etc complete
Supply and fixing of W.T. Bulk head fitting complete with guard suitable for lamp with 40 W bulb with PVC unsheathed leads from terminal to the fitting -SD.83
Wiring with 2 x2.5 5q.mm PVC unheated SC allocable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable color for Concealed PVC Right point/Fan Point SD 25
Wiring with 2 x 2.5 Sq.mm PVC unheated SC allocable of 650V grade in suitable PVC rigid pipe on wall and celling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non-interlocking C.5 Plug top with painting of suitable color for open PVC plug point.-SD-36.
Supply and Fixing of Celling fan including cost and conveyance of all materials and labor charges etc complete SD 106
Supply and fixing of Wash basin including all labour charges etc complete
Supply and fixing the IWSC including all labour charges etc complete
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
K SEKAR
stage.html
html • 0.02 MB
finance_464788.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .