EXTERNAL ELECTRIFICATION WORK OF (33 KV/ 11 KV/0.415 KV, HIGH VOLTAGE LINE AND 1x5.00 MVA SUB STATION) FOR 128 NGO 320 CONSTABLE HIGHRISE QTRS. AT 13TH BATTALION SAF, GWALIOR

Amount

H Beam 152x152 Supplying and erection of HT/LT over head line single length supports complete with aligning and keeping it in truly vertical position, including digging pit of required size in all type of soil/rocks filling with 1:3:6 cement concrete of 0.60 mtr. dia. around the pole up to ground level including muffing of 0.45 mtr. dia. from ground level to 0.45 mtr. high as per specifications with 20 cm. thick base foundation in 1:4:8 cement concrete as required refilling the pit with boulder and soil as required, including painting of pole with bitumen paint below GL and two coats of red oxide and two coats of aluminium paint or synthetic enamel paint above GL as directed complete as per specification. The depth of burying of pole shall be 1/6th of the length of pole.

H- BEAM 7 METER 152 X 152 MM 37.1 KG/METER

H-Beams 152 X 152 mm., 37.1 Kg./Meter 9 Meter. Long

H-Beams 152 X 152 mm., 37.1 Kg./Meter 11 Meter. Long

H Beam 13 Mtr Long 152x152 or 150x150 mm 37.1 Kg/Mtr. Weight

POLYMER PIN INSULATOR Supplying and fixing polymer type 11KV / 33KV pin insulator with GI pin, of approved make on existing pole or bracket with other necessary materials complete as required.

(i) 11 KV 5 KN PIN Composite Polymer Insulator

(ii) 33 KV 10 KN PIN Composite Polymer Insulator

AAAC DOG Conductor 0.10 sq. inch (100sq. mm. Al.Eq) Supplying and drawing AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any).

AAAC Panther Conductor 0.20 sq.inch (200 sq.mm. Al.Eq.) (30/3.00+7/3.00) Supplying and drawing ACSR/AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any).

AAAC RACOON Conductor 0.075 sq. inch (80sq. mm. Al.Eq) Supplying and drawing AAAC conductor of approved make with stringing making off complete with binding at existing insulator, jointing, jumpering, teeing off connecting etc. as required and clearing of obstacles (if any).

Aluminium Binding Wire and Tapes upply & fixing of Aluminium Binding Wire and Tape complet as per specification.

ANTI CLIMBING DEVICE BARBED WIRE Supplying and fixing 2 ply 14 gauge barbed wire around the existing HT/LT electric pole for safety measures as per IE rules including all stapples and all other necessary materials complete as required as per specifications.As per enclosed drwaing no.1.

STAY SET Supplying and erection of GI/MS stay set complete with stay rod, anchor plate of size 300x300x5mm, thimble, stay clamp, turn buckle, bow tightener etc. with stay wire, strain insulator, nut bolts as per specifications including excavation in all type of soil/ rocks and foundation in cement concrete 1:3:6 of required size and other necessary materials complete as required as per specifications

(i) GI Stay Rod 20mm dia (Painted) 1.8 m long with 7/4.00 mm (7/8 SWG) stay wire for HT line

(ii) GI Stay Rod 16mm dia (Painted) 1.8 m long with 7/3.15(7/10SWG)mm stay wire for LT line.

DANGER BOARD ENAMELED Providing and fixing enamelled danger caution plate/board on existing electric poles or wherever required of size 250x200 mm, made of 1.6mm thick mild steel sheet and vitreous enamelled white, with latest, figures and the conventional skull and cross-bones in signal red colour (as per IS-5-1978 with latest amendment) on the front side. The rear side of the plate shall also be enamelled. The corner of the plate shall be rounded off with required material such as screws, wires clamps, nut bolts etc. complete.

EARTHING COIL OF 115 TURNS OF 50 MM DIA.2.5 MTR.LEAD OF 4.0 MM G.I.WIRE Providing and fixing earthing arrangement for HT/LT poles with 8SWG GI lead of 115 turns of 50 mm dia. connection with pole / cross arm / control junction box on pole with 4 mm dia. GI lead through 20 mm dia A class GI protection pipe of 2.5 m length duly bend, packing of charcoal powder and salt as per specification including excavation of pit in all type of soil / rock, refilling of pit by black cotton soil etc. complete

DTR 11/0.4 KV CONVENTIONAL 3 STAR RATING TYPE Supplying installing, connecting, testing and commissioning of 3 Phase, 50 Hz, 11/0.433 KV , Delta/Star connected, Aluminium/Copper wound, oil filled, Indoor/outdoor type, Distribution/Station transformer of accepted standard specification, 3 star catagory class, with accessories such as drain & filter valve, earthing terminals, lifting arrangements of suitable size, dehydrating breather with silica gel of suitable size, Conservator tank, air release devise, Rating & diagram plate including CI rollers, Radiators with shut off valve, Cable end boxes on HT & LT side bushings, Explosion vent with diaphragm, Off load tap changing switch, Buchholz relay, thermometer pocket with 6” dial type thermometer & OTI, wherever required complete with first filling of oil with installation on existing DP structure or foundation etc. complete as per specification. The no load and full load losses should not be more than as mentioned below

3. DTR 11/0.4 KV BIS EE-Level-2 200 KVA

LT DISTRIBUTION BOX WITH HRC FUSE FOR 100 KVA DTR Providing and fixing outdoor type pole mounting weather, dust and vermin proof LT distribution box made of 14 /16 gauge MS sheet with clamping arrangements, lockable hinged door duly painted on all sides with red oxide after antirust and corrosion treatment, two coats of synthetic enamel paints of approved make and shade, consisting of following fittings. L.T. Distribution box suitable for 63/100/200/315 kva transformer (without TPN Switches) with required amp MCCb/Isolator on incoming side and PF HRC units on outgoing side. or

(b)For 200 KVA Transformer ( 9 SP/HRC of 160/200amp & 9 no. J type al hook.) TPMCCB 315 amp 35 ka Breaking capacity completes as required as per mpsseb latestt notification

33/11 KV POWER TRANSFORMER ,OFTC TYPR 5000 KVA LOSS (4KW+23KW) Supplying installing, connecting, testing and commissioning of 3 Phase, 50 Hz, 33/11 KV, Delta/Star connected ONAN cooling, step down, Copper wound, oil filled, Indoor/outdoor type, power transformer of accepted standard specification with accessories such as drain & filter valve, earthing terminals, lifting arrangements of suitable size, dehydrating breather with silica gel of suitable size, Conservator tank, air release devise, Rating & diagram plate, CI rollers, Radiators with shut off valve, Explosion vent with diaphragm, Off load tap changing switch, Buchholz relay, thermometer pocket with 6” dial type thermometer & OTI including Cable end boxes on HT & LT side bushings wherever required complete with first filling of oil with installation with foundation etc. complete as per specification. The no load and full load losses should not be more than as mentioned below. Power Transformer OFTC Type 33/11 KV, 5 MVA (NLL-4.0 KW and FLL-23KW

(a)33/11 KV Power transformer OFTC Type, 5000 KVA (Loss 4KW+23 KW)

33KV/11 KV DISC POLYMER L.ROAD TYPE T& C INSULATOR Supplying and fixing polymer type 11KV/33KV HT Disc (strain) insulator of approved make on existing pole or bracket with GI hardware and other necessary materials complete as required.

(i) 33 KV (45KN) Disc Polymer L.Rod type T&C Insulator with 33 KV Composite Polymer Strain set with hard ware suitable for panther conductor w L.ROD type T&C Insulator complete 33 KV Composite Polymer Disc Insulators

(ii) 11 KV (45KN) Disc Polymer L.Rod type T&C Insulator with 11 KV Composite Polymer Strain set with hard ware suitable for panther conductor w L.ROD type T&C Insulator complete 11 KV Composite Polymer Disc Insulators

Supplying Installatin Testing and Commissioning of D.P. structurre over existing support with painting in an approved manner consisting of following:- (a) D.C. cross arm with clamp and nuts bolts (100x50x6mm channel) – 1Set (b) 11KV D.O. fuse unit, lighting arrester and A.B. switch mounting channels with nuts and bolts (75x40x6mm channel) as required –1 set. (c) Transformer mounting cross arms with clamps nuts and bolts (100x50x6mm. Channels) – 1 set. (d) Transformer clamping set with nuts and bolts etc. complete. (50x50x6mm angle 460 mm long)1 set. (e) Transformer belting set with nuts and bolts etc. complete. – 50x50x6mm angle 1 set. (f) Distribution pannel mounting channel and clamp with nuts and bolts etc. (75x40x6mm channel).-1 set (h) S/f DTR metering -LT 3 phase 4 wire 3x240 volts IB=5 amps lmax x 10 amp, trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible) modem with box as per MPEB specification complete. Make:- Genus, L&T, Sceure Meters Limited (j) A.B. Switch single phasing 400 AMP as per M.P.E.B. norms completed. 1 Set Make :- G.K. Electrical, Kiran, Jaipuria, Atlas, Pactil, Techno fiber, Rashtriya Electrical & Engineering corporation (k) L.A. polymer type as per M.P.E.B. norms specification complete. Make :-Oblum, Elpro, I.G.E., GK, Rajtree, Rastriya Electricals & Engineering corporation (l) 11 KV 200 Amps DO Fuse (3.nos) 1 Set Make :- G.K. Electrical, Kiran, Jaipuria, Atlas, Pactil, Techno fiber, Rashtriya Electrical & Engineering corporation (m)BIMETALLIC CLAMP (n)Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC (o) D.P. structure complete as above. Complete as above (a to m)

Providing and fixing chain link fencing sourriding existing DTR S/S finical (37 feet) of 6’ height with chain ling fencing on MS Angle (50X50X6) mm support 7 nos. 7’ height with following feature. (A) Upper & lower frame of fencing will be of MS angle (25X25X4) mm size. (B) MS strip of (25X5) mm flat shall be used fro cross bracing of fencing (C) Double Gate (2 Nos. 2.5’X5’) of MS angle (50X50X6)mm. bracing of 25X5 mm flat with mesh & locking arrangement. (Complete as above AtoC) – one job.

Supplying and fixing of angle / channel / flat iron / RS Joist fittings for over head lines as cross arms / brackets / clamps etc. including nut bolts, required holes, welding, cutting, fabricating with necessary materials including two coats of red oxide and two coats of aluminium or synthetic enamel paint etc. as required.

PVC Alluminium Armoured & XLPE Alluminium Un Armoured CABLES Supplying, laying, testing and commissioning of XLPE insulated and PVC sheathed heavy duty power cable confirming to IS 7098/Part-I/88 with latest amendments, 1100 volts grade armoured cable of approved make with aluminium solid / stranded conductor. The cable shall be laid in air/in existing pipe/in existing cable trench/on existing cable tray with clamp as required as per specifications including providing of metal/PVC cable identification tags at both ends and every 10 Mtr. length of cable with inscriptions there on.

XLPE LT single -Core Alluminium Un armoured cable 150 Sq.mm

PVC Cable 4 Core Alluminium Armoured 16 SQ.MM

XLPE 1 core unarmoured 300 sqmm Aluminium conductor 1100 Volts

SITC COPPER CONTROL CABLE 12 CORE, 2.5 SQMM PVC UNARMORED

SITC COPPER CONTROL CABLE 8 CORE, 2.5 SQMM PVC UNARMOURED

SITC COPPER CONTROL CABLE 4 CORE, 2.5 SQMM PVC UNARMOURED

SITC COPPER CONTROL CABLE 2 CORE, 2.5 SQMM PVC UNARMOURED

CAT 6 CABLE Supplying installing, testing and commissioning of CAT 6 CABLE ISI mark Complete

(a)11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories

(b)33 KV VCB, Outdoor Porcelain clad type with complete structure and accessories

Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth

PTR Fndn.Cncrt.:1:1.5:3 Rio 5.634,1:5:8 Rio 7.545 cmt&M.S.Flat/rod

33 KV Isolator 600 Amp .(TURN & TWIST TYPE ISOLATOR) Supplying installation testing and commissioning of 600 Amp.(TURN & TWIST TYPE ISOLATOR) triple pole outdoor type two stack and three Insulator padestals per phase, manual operated rotating type Isolator complete with fixed and moving contact of hard drawn electrolytic copper flat, 8 mm dia GI rod for fixed and moving arching horn, 32 mm dia GI pipe for operating handle, 19mm dia GI pipe for phase coupler,brass bush and trust bearing, isolator base channel, post insulator, padlock with key, earth/without earth switch and other required accessories etc. complete as required. 33 KV Isolator 600 Amp with earth switch (set of 3 Nos. for 3 phases)

SITC 33 KV CT OUTDOOR TYPE 200-100/ 5AMP AS PER MPEB NORMS & SPECIFICATION.

SITC 11 KV CT OUTDOOR TYPE 200-100/ 5AMP AS PER MPEB NORMS & SPECIFICATION.

Supplying, installation, testing and commissioning of 11 KV OIL IMMERSED COMBINED CT:PT UNIT (ME) OF ACCURACY CLASS OF 0.5S WITH CT RATIOO 200-100/5 AMP AS PER MPEB NORMS & SPECIFICATION

SITC 11 KV CT.(out door type) 300-150/5 Amps AS PER MPEB NORMS & SPECIFICATION.

SITC11 KV Single Phase PTs. (Resin Molded)

SITC 33 KV Single Phase PTs.

SITC 11 kv control & relay panel with SCADA compatible for feeder protection (1F)

SITC 11 kv control & relay panel with SCADA compatible for feeder protection (2F)

11 kv control & relay panel with SCADA compatible for transformer protect (IT)

33 KV POLYMER LIGHTNING ARRESTER Supplying, installation, testing and commissioning of station/ distribution class, thyrite magne valve,0.10 W/KV watt loss polymer lightning arrester with earthing neutral system. Arrester shall be rated at 30 to 37 KV for 33 KV supply ( Set of three numbers for 3 phases) 33 KV polymer Station Class LA

11 KV LA POLYMER TYPE GAPLESS /METAL OXIDE 9 KV , 10 KA SUBSTATION Supplying, installation, testing and commissioning of station/ distribution class, thyrite magne valve,0.10 W/KV watt loss polymer lightning arrester with earthing neutral system.Arrester shall be rated 9 to 15 KV for 11 KV supply ( Set of three numbers for 3 phases) 11 KV LA POLYMER TYPE GAPLESS /METAL OXIDE 9 KV , 10 KA SUBSTATION TYPE AS PER MPEB NORMS & SPECIFICATION.

9 KV Gapless type(5 KA) polymer lightening arrestor

11 KV LIGHTENING ARRESTOR GAPLESS TYPE

sitc 33 kv control & relay panel with SCADA compatible for transformer protection

sitc 3Ph 4W 3x63.5V lb=5A Imax=10A, HT trivector meter,0.5s,DLMS cat-A,GSM(S/s meter)

Supplying, installation, testing and commissioning of Electro-mechnical isolation contacts complete.

SITC Marshelling box with 10 no. connectors

SITC P&F perfo cable tray 300 wide,2 thick fix 45x45x5 MS angle grouted CC 1:24

SITC SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB

sitc Bi Metallic Clamp for Power Transformer of Brass Flat 50x50x10MM

SITC Bi-metallic clamps suitable for 25mm dia stud and 300sqmm cable

Jointing sleeves suitable for conductors supply & fixing jointing sleeves suitable (1000 sqmm ALUMINIUM eq.) for DOG Conductor

SITC LED Lamp with 90 Watt (Complete)

SITC Proposed TAP POSITION INDICATOR TRANSMITTER

SITC EARTHING SET (DTR EARTHING) AS PER CIRCULAR NO 1516 DATED 17.03.08

SITC Cable marker

SITC G.I. wires 5.0 mm (6 swg)

SITC Bentonite Compound poweder

SITC G.I. wires 4.0 mm ( 8 Swg)

SITC G.I. Pipe 40 mm Dia C grade type

SITC G.I. pipe 150 mm A Grade along DP

SITC G.I. pipe 150 mm B grade

SITC Sand for filling over cable

SITC Earthing Rod 3 mtrs.(Gelvanised) 25 mm Rod

SITC 11 KV Ring main unit ( RMU ) SF-6 type

SITC11 KV SECTIONALISER

SITC KV Stand alone Fault Indicator complete with GPRS modem SCADA compatable

SITC AUTO RECLOSURE 11KV 200KV DEFECTIVE

SITC Contact multiplying relay

SITC Contractors 30 V DC, 10 Amp

SITC GSM Modem with Store & Forward Feature

SITC Heavy duty relays for CB Trip/close

SITC Multi function transducers

SITC Oil temperature indicator (OTI), Dial 150mm, with capilary, Mercury swicth type

SITC Winding Temperature Indicator Dial 150mm with Capillary, Mercury Switch type

SITC Proposed PVC /HDPE Pipe 6" Dia (40 Mtr.)

SITC Bhatta Bricks for covering over sand filling

Supplying and laying 50mm X 6mm G.I. strip at 0.5 Meter below ground level / surface as strip earth electrode including jointing etc. as required.(AS PER MPEB RATE)

SITC 3 Ph Service conn. Box with one incoming up to 35 mm 2 and 4 no. outgoing up to 16 sqmm(pvc body mpeb approoved)

TUBULAR POLE STREET LIGHT SP29 Supplying and erection of HT/LT over head line single length supports complete with aligning and keeping it in truly vertical position, including digging pit of required size in all type of soil/rocks filling with 1:3:6 cement concrete of 0.60 mtr. dia. around the pole up to ground level including muffing of 0.45 mtr. dia. from ground level to 0.45 mtr. high as per specifications with 20 cm. thick base foundation in 1:4:8 cement concrete as required refilling the pit with boulder and soil as required, including painting of pole with bitumen paint below GL and two coats of red oxide and two coats of aluminium paint or synthetic enamel paint above GL as directed complete as per specification. The depth of burying of pole shall be 1/6th of the length of pole. Supply of steel tubular pole swaged type as per IS:2713-1980 complete with base plate and top Canopy 42.3.10 410 SP-29 - 9.00 metre

SITC 6 AMP TO 32 AMP FOR STREET LIGHT ( AS PER PWD SOR 2020)

SITC 2 KVA UPD( FOR LDMS WITH 160 AH BATTERY)

SITC 2 MBPS VPN LINK FOR CONNECTIVITY FOR S/S WITH SCADA CONTROL CENTER1

SITC 48 V DC POWER SUPPLY SYSTEM BASED ON SMPS FOR RTU & COMM. EQUIP WITH 80 AH BATTRY

SITC DCPS (24 V POWER SUPPLY)

SITC LASER PRINTER

SITC LDMS SOFTWARE

SITC RTU BASE AND FOUNDATION ( BASE SHOULD BE CAPBALE OF WITH STANDING 200 KG LOAD)

SITC REMOTE TERMINAL UNIT (RTU) INCLUDING SOFTWARE FOR 2 NO. POWER TRANSFORMER

SITC WINDING TEMPERATURE INDICATOR DIAL 150MM WITH CAPILLARY, MERCURY SWITCH TYPE

SITC TAP POSITION TRANSMITTER

11 KV ISOLATOR Supplying installation testing and commissioning of 400 Amp.(TURN & TWIST TYPE ISOLATOR) triple pole outdoor type two stack and three Insulator padestals per phase, manual operated rotating type Isolator complete with fixed and moving contact of hard drawn electrolytic copper flat, 8 mm dia GI rod for fixed and moving arching horn, 32 mm dia GI pipe for operating handle, 19mm dia GI pipe for phase coupler, brass bush and trust bearing, isolator base channel, post insulator, padlock with key, earth/without earth switch and other required accessories etc. complete as required.

(j) A.B. Switch single phasing 400 AMP as per M.P.E.B. norms completed. 1 Set Make :- G.K. Electrical, Kiran, Jaipuria, Atlas, Pactil, Techno fiber, Rashtriya Electrical & Engineering corporation

SITC T CLAMP FOR 33 KV & 11 BUS, SUBSTATION

Om Shiv Associates