Tirunelveli District- Cheranmahadevi TP- KNMT scheme 2025-26-Road and Compoundwall

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Plain Cement Concrete 1:4:8 Mix (one part cement, four part M-Sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Centering for soffits of RCC Surface works including all cost and conveyance of materials to site and all labour charges etc, complete.

Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

P.C.C 1:1.5:3 mix (One part of Cement, 1.5 part of Sand and three part of Aggregate) using 20mm HBG ISS metal including all cost and conveyance of materials to site and all labour charges etc, complete.

P.C.C 1:2:4 mix (One part of Cement, two part of Sand and four part of Aggregate) using 20mm HBG ISS metal including all cost and conveyance of materials to site and all labour charges etc, complete.

Supply,Delivery and Fixing of Bitumen Pad including all Labour Charges etc.complete.

Centering for soffits of RCC Surface works including all cost and conveyance of materials to site and all labour charges etc, complete.

Reinforced Cement concrete (One Part cement, One and Half part M and sand and three part aggregating using 20mm size ISS HBG metal machine crushed from approved quarry including cost and Conveyance of all metarials to site, Loading and Unloading charges and labour charges for mixing laying and curing but excluding cost of reinforcement etc, Complete with std. Specfications (using Vibrator) TNDSS No.30V.VI(S3) VII-3

Supply and fabricating and Placing in positions MS or RTS bar reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand ) using new best II class Bricks of size 9” x 4 3/8” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.(For 10M3)

Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Painting two coats of newly plastered wall surface with approved Emulsion paint over cement plastered wall surface, ceiling and including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required and cost of painting materials, brushes, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer

Supply and fixing of MS Grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer members which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc, complete complying with standard specfication

Painting two coats on new iron works with best synthtic enamel paint of approved clour and quality -10m2

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted etc complete complying with standard specification

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour SD 465

Please Enable Macros to View BoQ information