Supplier for supply of Modular Furniture

Amount

UGC – HRDC Guest House & NRC Studio UGC (NRC) GRANT & General Fund

Visiter Bed with Box 750 X 1800 X 450 completely made up of Prelam particle board conforming to IS:12823 interior Grade with PVC edge banding. Top are 25mm thk boards with 2mm PVC edge banding with enhances scratch resistance supported 25mm thk. Gable ends and 18mm thk Modestly panels. Exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding.

PRELAM STORAGE@750x425Dx1200H Ground Floor-26 no.+First Floor-16 storage body is made of 18mm thick pre laminated partical Board conforming to IS:12823 interior Grade,The back of the units is made from 9 mm prelaminated board. All the exposed edge are with 2mm PVC edge imported banding & sealed edges are with 0.8mm thick PVC imported edges banding. The top,side and hinged shutters are saled with 2mm thick PVC edge banding. The units are assembled by knock down fitting such as Minifix & Dowels.All the handware and Hinges.PVC edge banding are imported and std.quality Design Range of prelaminated storage units Effective span utitization alongwith apreminum look provision for adjustability of the shelf panal inside the storage with oin support PVC Edge banding is done by machine pressed with hot melt glue. Units available in 2-door & 3-door options Top panel option of 25/18 mm thick prelaninated particle Board with PVC Edgebanding Door shutters side & shelf panels 18 mm thk prelaminated particle Board with PVC Edge banding Door Shutters side & shelf panels 18mm thick prelanminated particle Board with PVC edge banding Back panel 9mm thk prelanminated particle Board with PVC.

Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc.

Providing & Fixing Dressing Table of size 400LX 400DX 1800H.The Dressing table unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thick prelm particle board attached to the base unit. The mirror size considered is 1155 x 360 x 4(t). The mirror has been pasted using high quality 3M sticker

Providing and fixing wooden chairwith arm rest. The back type is with Back rest with a width of 540 mm with arms and 4690mm without arms max.The back is made up wood veneer with foam back.seat The seat height is at 455mm with cusion seat understructure the chair is made od rubber wood vencer with thickness of the leg 25mm and width of the leg 28mm. The overall height of the chair is 850mm with a max. width is 540mm.

Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (kgs): 66 (Kg) Seating Capacity: Five Seat

Providing and Fixing large Almirah.. 5'X7' of prelaminated board with required compartment and drawers etc complete

Providing and placing office & computer table (Executive)Big size 1.60 x 0.77 x 0.60 m height having top & side made of 20 mm thick three layered flat pressed teak wood particle board bounded with BWP type exterior grade phenol formaldehyde resin conforming to I.S. Laminatrd on both side & having deawer on both side with lock.

Providing and fixing or L shape for TV & Mobile Charger with Hinger feering.

Providing for Glass Mirror in Bathroom feeting of size 1.6' X2 ft decorative as per engineer incharge.

Providing and fixing theacrilic Name Plate of reqd size and shape etc complete.

Providing Towel Rod in Bathroom with Hanging Feeting.of s.s. Finish fancy type as per Engineer incharge

Executives High Back Chair Officer 7 no.Back Rest 12mm Thick (7 layers) hot pressed Plywood and moluded back foam upholstered with fabric Size of Back (HB)790mm(H) X 500mm(W) Seat ply 12mm thick 7 ply hot pressed plywood Fabric Delta Fabric 100%Polyester Abrasion Arm Rest Adjustable 1D arm rest with height adjustable up to 80mm with height adjustable up to 80mm & front and back with adjustable up to 60 mm

Providing and fixing fancy hooks or hanger of s.s. finisih etc complete

Storage Cabinet of 3 ' Ht of prelaminated board with extra top as per engineer incharge

Providing and placing Writing Table with Drawer(Executive)Big size 1.60 x 0.77 x 0.60 m height having top & side made of 20 mm thick three layered flat pressed teak wood particle board bounded with BWP type exterior grade phenol formaldehyde resin conforming to I.S. Laminatrd on both side & having drawer with lock

Table Medium size with drawer and side cabinet (3'x3') of prelaminted board as per engineer incharge

Providing and fixing Mural or Welcome frontier at entrance foier as per Engineer incharge

Providing & Fixing in position, Acoustical Panelling made from Wood-wool board 20mm on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete Wall (5mx3m) Quantity 30 Nos. Wall (4mx3m) Quantity 24 Nos.

Providing & Fixing in position, Acoustical Panelling made from Wood-wool board 20mm on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete Wall (5) Quantity 05 Nos. Wall (4) Quantity 04 Nos

Providing & Fixing in position, Acoustical Ceiling made from Compressed polyester fibre nonwoven 9mm panels on approved heavy duty GI frame 300 mm c to c & intermediate channels at 1200 mm c to c, suspended with Hangers from Roof, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete Quantity 5.67 Nos. (L – 0.90 & D – 2.1)

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Quantity 1.30 Nos. (L – 0.90, B-0.23 & D – 2.1)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Quantity 11.34 Nos. (L – 0.90 & D – 2.1)

Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) Quantity 11.34 Nos. (L – 0.90 & D – 2.1)

D. S. Furnishers, Wardha

FINEWOOD CONCEPTS PVT.LTD