Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹4.3 LAccepted-AOC RAHAM TANDWA DISTT CHATRA PIN 825321 | CHATRA | JHARKHAND | 825321 | L-1 | Accepted-AOC As per recommendation of TC and approval of competent authority | |
| 2 | L-2₹3.9 L+₹22,443.90 (6.18%)Rejected-Finance ARA P O GANESHPUR DIST LATEHAR PIN 829202 | LATEHAR | JHARKHAND | 829202 | L-2 | Rejected-Finance AS per recommendation of TC and Approval of Competent Authority | |
| 3 | Rejected-Technical DAKRA COLLIERY PO DAKRA CHURI RANCHI NEAR GURUDWARA GM OFFICE ROAD RANCHI HAZARIBAG JHARKHAND 829210 UDYAM JH 20 0002793 | RANCHI | JHARKHAND | 829210 | - | Rejected-Technical As Per NIT |
Tender Value
₹4.3 L
EMD Value
₹5,370
Closing Date
3 Jan 2025, 6:00 pmClosed
Staff Officer (EnM),Magadh -Sanghmitra Area
Office of The General Manager M-S Area, Bachra 829201.
Power supply arrangement at newly made permanent check post at black top road for proposed boom barrier installation which is 600 meter far away from existing check post no-01 at massilaung under Magadh OCP,M-S Area
2024_CCL_324135_1
GM(MS)/SO(EnM)/e-NIT/24-25/67
Open Tender
Electrical and Maintenance Works
Item Rate
10 days
Office Of the Project Officer Magadh OCP, M-S Area
Please Refer NIT
4 documents required · 4 mandatory
₹5,370
30 Mar 2025
25 Dec 2024
4 Jan 2025
25 Dec 2024
3 Jan 2025
25 Dec 2024
25 Dec 2024 - 31 Dec 2024
Amount
Erection of metallic pole of length above 10mtr and upto 12 mtr in cement corncrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required
Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required for Tensioning of Conductor where required.during changing of damaged insulators or changing of cross arms
Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 4 wire system.
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.
Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 2 wire system.
Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required.
Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required.
Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement. 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work.
Providing of 25 sq mm 4 core isi marked, upto 1.1 kv grade Alluminium armoured cable for laying service wire
Laying of one number PVC Insulated and PVC sheathed/XLPE power cable of size not exceeding 35 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. As required
Providing of Onload Manual switch disconnector changer with sheet steel enclosure Type, 100 Amp
Providing and fixing 100 A rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper 15 busbar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way, Double door
Erection of cradle guard as required.
Supply of 6 SWG G.I wire
Erection of G.I wire no-6/8 SWG including binding etc.as required for cage cradle and crosslacing.
Providing and fixing of LT PVC SPACER for Four wire System
Earthing with copper earth plate 600 mm X 600 mm X 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/coke and salt as required.
Fixing Charge of supplied items including end termination no 13 at 15% of item cost
Total impact of GST for the purpose of CTC
M/S T K ENTERPRISES (BID ID -1111984)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .