REPAIR AND MAINTENANCE OF TOILET BLOCKS IN TAJ MAHAL COMPLEX

Amount

Providing & fixing 50 mm thick fine chiseled red sand stone flooring over 25 mm thick lime mortar 1: 1: 1 ratio (1 Unslaked Lime : 1 Coarse Sand : 1 Surkhi of 1st class bricks) after taking out very carefully old & decayed red sand stone floor and pointing the same mortar including supply of all materials, labour, T.& P. etc. required for proper completion of work including pointing. (Rate Including GST).

Dismantling tile (for thickness of tiles 10 mm to 25 mm) work in floors and walls laid in cement mortar including stacking material within 50 metres lead. (Rate Including GST).

Providing and laying vitrified floor tiles in different sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Rate Including GST).

Providing and laying Polished Granite stone slab of all colour and texture (except Black, Cherry/Ruby Red stone) flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (Rate Including GST).

Providing and fixing Ist quality ceramic glazed wall tiles (water proof) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Rate Including GST).

Providing and fixing glazed screen printed border tile 75mm wide having thickness 5mm, of approved quality & make, in all shades, design and prints, in dado, over 12mm thick bed of cement mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing with white cement mixed with pigment of matching shade, all complete as approved by Engineer - in - Charge. (Rate Including GST).

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. (Rate Including GST).

Providing and fixing 12.5 mm thick tapered edge gypsum moisture resistant board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting. (Rate Including GST).

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (Rate Including GST).

Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab upto 0.50 sqm. (Rate Including GST).

Providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (Rate Including GST).

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade. (Rate Including GST).

Providing Salwood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (Rate Including GST).

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. (Rate Including GST).

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Rate Including GST).

Providing Red sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete. (Rate Including GST).

10 cm thick (average) mud phaska of damped brick earth with common burnt clay F.P.S.(non modular) brick tile of class designation 10 on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: (Rate Including GST).

Painting top of roofs with residual type petroleum bitumen of grade VG-10 of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. (Rate Including GST).

Providing & laying 25mm av. thick plain and simple moulding lime plaster on the roof in two coats with lime mortar 1:1:1 ratio (1 Lime, 1 Surkhi of 1st class bricks,1 C. Sand) including supply of all materials, labour, T.& P.etc. required for proper completion of work. (Rate Including GST).

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. (Rate Including GST).

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. (Rate Including GST).

Supplying and fixing new 2nd class teak wood wooden fillets wherever necessary. (Rate Including GST).

Cutting chases in brick masonry walls for 50 mm diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand). (Rate Including GST).

Providing and fixing White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required. (Rate Including GST).

Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. (Rate Including GST).

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (Rate Including GST).

Providing and fixing P.V.C. flexible waste pipe of dia 32mm to 40 mm for sink or wash basin including P.V.C. waste fittings complete. (Rate Including GST).

Providing and fixing CP Brass toilet paper holder. (Rate Including GST).

Providing and fixing Rectangular shape 1500x450 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. (Rate Including GST).

Providing & fixing White vitreous china Orissa pattern W.C Pan of size 580x440 mm water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (Rate Including GST).

Making the opening in brick masonry for door/ window/ clerestory window including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. (Rate Including GST).

Repairing of existing air duct system installed in East side toilet by replacing 4 nos. 12" exhaust fans after removing the false ceiling approx 30.00 Sqm. carefully and fitting the same including minor repair work. (Rate Including GST).

Providing and fixing 10 litre (full flush) capacity-white controlled flush, low level cistern made of vitreous china with all fittings complete. (Rate Including GST).

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) inclduing fixing Departmental 4 mm ACP Sheet in the frame. (Rate Including GST).

Providing and fixing Second class teak wood 35 mm thick shutters panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately). (Rate Including GST).

Carriage of Malwa collected during execution of work by manually and help of hand cart including stacking of serviceable material and disposal of unserviceable material upto 500metres lead as per direction of Engineer-in-charge. (Rate Including GST).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Rate Including GST).

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. (Rate Including GST).

Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. (Rate Including GST).

Providing and fixing 125mm chromium plated brass handles with necessary screws etc. complete. (Rate Including GST).

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.(Rate Including GST).

Brick work with cement mortar 1:6 (1 cement : 6 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth. (Rate Including GST).

Minor Repairing Work of Wooden Doors i.e. Replacement of Batten, Panel, Ply etc including supply of all material, labour etc. (Rate Including GST).

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10 km for all lifts, complete as per directions of Engineer-in-charge. (Rate Including GST).

Providing & fitting Water Storage Tank 1000 Ltr with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of SS C.P. Jali 4" - 6" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of PVC Tee - 4" - 6" with all accessories & labour charges required for execution of work. (Rate Including GST).

Supply of Solvent 118 ml pack including applying charges etc. (Rate Including GST).

Providing & fitting of Bib cock C.P. brass with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Angle valve C.P. brass with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Valve 1" brass with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Ball Cock with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Long body CP brass with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of G.I. Tee 1.25" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Tank nipple 1" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of CP nipple 1/2" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Flush Tank Syphon Kit Full Set, Flushing Cistern Accessories, Standard Size with all accessories & labour charges required for execution of work. (Rate Including GST).

Suppling and laying of White cement including labour charges etc. (Rate Including GST).

Providing & fixing of Tee 1" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Socket 1/2" with all accessories & labour charges required for execution of work. (Rate Including GST).

Supply of M seal including applying charges etc. (75 GM Pack) (Rate Including GST).

Providing & fixing of S S hinge of required size with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Gulli of required size with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of S.S. Screw 1.5" including labour charges. (Rate Including GST).

Providing & fixing of Extension Nipple 1" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Extension Nipple 2" with all accessories & labour charges required for execution of work. (Rate Including GST).

Supply of Shellac including labour charges etc. (Rate Including GST).

Providing & fixing of Cistern handle with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Water cupling with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Flench CP brass with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of CP nipple 3" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of CPVC pipe 1.25" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of CPVC Tee 1.25" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of FAPT 1.25" with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of MAPT with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of FABT with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Pillar Cock (Flora) with Chrome Finish - Hindware or Eq with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of PVC pipe 4" dia with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of PVC Elbow 4 inch 110 mm 2-Way 90° Elbow Pipe Joint with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of PVC Elbow 4 inch 110 mm Tee with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Plastic Automatic Hand Dryer (1800W 220V)with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of ACP Sheet 4 mm thick of Required Colour with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of 15 Watt. Trim squre panel LED Light - Havells or Eq with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Copper Wire 1.50 mm - Havells or Eq. (90 Mtr. Bundle) with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & lalying of Copper Wire 2.50 mm - Havells or Eq. (90 Mtr. Bundle) with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of PVC Cassing patti 30mm x 25mm with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of MCB 16 Amp with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of MCB TPN 63 Amp with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of SS Screw 1.50" (100 screw in pkt.) with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of SS Screw 2.50" (100 screw in pkt.) with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Switch 5 Amp. Havells or Eq. with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Socket 16 Amp. Havells or Eq. with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of 16 Way Double Door Distribution Board (MCB panel box of size 1'x1.50') with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Fiber Exhaust fan 300mm - Havells or Eq. with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Heavy duty Industrial Exhaust fan (450mm - Havells or Eq.) with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Swing Wall fan (400mm - Havells or Eq.) with all accessories & labour charges required for execution of work. (Rate Including GST).

Providing & fixing of Heavy Duty Jute Carpet of 10 mm thickness with required adhesive & labour charges required for execution of work. (Rate Including GST).

Supply of Heritage Dustbins 100 Ltr. Capacity of Required Colour for tourist facilities. (Rate Including GST).

Supply of Jute Coir Door Mat Heavy Duty for Toilets - size 3'x1.5'. (Rate Including GST).

Supply of Dustbin 10 Ltr. Capacity for Toilets. (Rate Including GST).

M/s PAPPAN ELECTRIC AND GAS WELDING WORKS

Bankey Bihari Stone Merchant