Renovation of Kothi No. 1 Canal Colony Cantt Road Lucknow.

Amount

Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge with in distance of 60m.

P/L 12 mm thick cement plaster in 1 : 4 with cement and corse sand mortatar includinng the cost of labour & material etc.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Scraping old white or colour wash including disposal of refuse as directed by Engineer- in- charge with in a distance of 60m.

One priming coat and two coat oil bound distemper including supply of all materials, labour and T&P etc.required for proper completion of work.

Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc required for proper completion of work

Dry Earth work in Foundation including disposal and back filling with all cost of labour, matrerial and T&P etc.

Providing and Laying PCC 1:3:6 in with cement, coarse sand and 12-20 mm gauge approved stone ballast including all material, labour and T&P etc. complete.

Class-150 brick work in 1:6 cement and coarse sand

Class-150 brick work in 1:4 cement and coarse sand

Centring and shuttering for R.C.C. work including rent of shuttering & all cost of labour, material and T&P etc. required for proper completion of the work.

Providing & Laying in position RCC in 1:1.5:3 with cement, coarse sand and 12-20 mm gauge stone grit including cost of all material, labour, T&P etc. complete in all respect.

Providing/Fixing of S.S. Mosquito proof jali

Dismantling Door/Window/Almirah including chaukhat with holdfast an including stacking of material as directed by engineer in charge with in a distance of 50mtrs

P/F 40mm thick C.P. teak wood door & window shutter of heavy quaklity SS mosquito proof Jali with necessary beeding excluding fixing of all fixture but including their cost of all m/lt&p etc

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.9.9.1 Second class teak wood. 35 mm thick

Providing and laying vitrified tiles flooring of approved make by E/I flooring over 20 mm thick base of cement mortar 1:4 ( 1cement : 4coarse sand)laid and jointed with white cement (with pigment) slurry including rubbing and polishing of joints complete. (Size 60x60 cm)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing & fixing 15 mm thick densified tegular edged ecofriendly light weight calcium silicate false ceilling tiles of approved texture spintone/Cpsmos/Hexa or equivalent of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sacion ( galvinizaning @ 120 gm/M² including both side) consisting of main T runner suitbale spaced at joints to get required length of size 24x38 mm made from 0.33 mm thick( minimum) sheet, spaced 1200mm center to center & crossed T of size 24x28 mm made out of 0.33 mm (minimum sheet, 1200 mm long spaced between main T at 600 mm centre to centre to form A grid of 1200x600 mm & secondaru cross T of length 600 mm & size 24x28 mm made of 0.33 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a perimeter wall along precoated steel of size ( 24x24x3000 mm) made of 0.40 mm thick (minimum) sheet with the help of rawal plugs ta 450 mm center to centre with 25 mm long dry wall screws @ 230 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 15mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 20mm

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :

Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives of required shade:New work (Two or More coats applied @1.43ltr/10sqm over and including priming coat of exterior primer applied @2.20Kg/10sqm) (apex ultima, weather coat all guard) asian, berger

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (External works) 50 mm dia

P/F Chromium plated bib cock, complete with all materials. 15 mm dia

P/F C.P. brass angle valve for cistern, wash basin, Gyger etc. 15 mm nominal hole size including cost of all material, labour, T&P etc.

P/F 15 mm nominal hole size C.P. stop cocks.

P/F 15 mm nominal hole size C.P. brass pillar each cocks

Fixing 15 mm PVC connection, heavy quality with brass Union including supply of all materials, labour, T&P etc. required for proper completion of the work. 45 mm length

P/F in position C.P. brass towel rail complete with brackets including making chases in walls and repairing the same in 1:3 CM complete. b- 600x20 mm

Fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleeves with C.P. brass screws.

P/F C.P. brass toilet paper holders including cost of all material, labour, T&P etc.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required

P/F 600x460 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C.P. brass screws and washers.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.As per DSR 2018 17.8

P/F C.P. Jali 100mm dia .

P/f C.P. brass waste pipe for sink and wash basin32mm dia comple cost of all m/lt&p as per ch XVIII item no 16

P/f chromium plated shower rose with 15mm as 20mm inlet complete and 100mm dia ch XVIII item no 30

P/F HEP Nehani Trap of Indian make HCI 100x75 mm 4 kg.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 250x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : 200x10mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete :150x10

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

S/F of 100 Amp four pole change over switch on 40mm x 40mm x 6 mm angle iron frame, including the cost of labour T&P, painting and other material required for proper completion of the work as per direction of engineer-in-charge

Wiring point for exhaust fan in 1.5 Sq.mm. FR PVC insulated multistrand single core copper conductor cable (drawn through existing concealed conduit) and 15 Amp. Flush type switch & ceiling rose fixed with 3 mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over the existing. M.S. box/Junction box required for proper completion of the work as directed at site by the Engineer-In charge.

S/F of Power plug with 20 A/250 V flush type modular switch and 5 pin 20 A/250 V flush type Universal modular socket switch on conceiled M.S. box including supply of all M/l/T& P Etc. required for completion of work.

S/F of Flush/ surface mounting 6 ways TPN distribution ( Legrand Lexic) without MCB with additional metal door complete in all respect , as directed at site by Eegineer-in-charge.

Wiring point for light with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe conceled in the wall, complete with 14 SWG copper earth continuty wire, piano type switch & ceiling rose/angle/batten holder on 3 mm thick Phenoplic lamoinated back light sheet etc. complete in all respect, as directed including matching colour wash. As per above but PVC conduit with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Wiring point for fan/ fresh air fan ( light duty exhaust fan) with in 1.0 Sq.mm. FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe conceled in wall, complete with 14 SWG copper earth continuty wire, piano type switch & ceiling rose on 3 mm thick Phenplic laminated back light sheet etc. complete in all respect. including matching colour wash As per above but in PVC conduit with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Wiring point for call bell with 1.0 sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuty wire, piano type switch bell push or 2 pin socket etc. complete in all respect. including matching colour wash. As per above but in PVC conduit with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Wiring point for HPMV/Sodium wapour lamp with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuty wire and 15 A piano type switch etc. complete in all respect. including matching colour wash.As per above but in PVC conduit with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Supply & wiring of sub main with two no.- 4 sqmm FR PVC insulated 1100 volt grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit on surface, with one number 14 SWG copper earth continuty wire. complete in all resoect. As per above but in in 20 mm dia heavy duty ( 2 mm thick) PVC conduit with one number 2.5 sq.mm multistrand copper conductor cable as earth continuity wire drawn in conduit.

Supply & wiring of sub main with two no. 6 sqmm FRPVC insulated 1100 volt grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit on surface, with one number 14 SWG copper earth continuty wire etc.. complete in all resoect.

S& F 16 Amp 415 Volt metal clad HRC type switch fuse unit complte with on angle iron bracket complete in all respect.

S& F 32 Amp 415 Volt metal clad HRC type switch fuse unit complte with on angle iron bracket complete in all respect.

S& F 63 Amp 415 Volt metal clad HRC type switch fuse unit complte with on angle iron bracket complete in all respect.

Supply and burying of safe earthing Electrode T-39 Zn-Zinc coated, Length up to 3000 mm, outer pipe 76.3 mm x 3.2 inner pipe 42.4 mm x 2.6 mm, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducting the soil resistivity with good mixture of retaining capacity and one earthing lead of 20x3 G.I. strip, upto switch board ( from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.

Supplying & laying of 25 mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

BHAJAN LAL