Maintenance and Repair to office

1) Dismantling R.C floor, roof, beams etc including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars for qtr III/3 a) in ground floor including roof.

2) Dismantling artificial stone flooring upto 50 mm thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof

3) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering comers as directed and taking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface Plaster (to wall, floor, ceiling etc.) with sand and cement mortar With 1:6 cement mortar (b) 20 mm thick plaster

4) Neat cement punning about 1.5mm thick In wall,dado,window sill, floor etc. NOTE :Cement 0.152 cu.m per 100 sq.m.

5) Renewing throating, nosing or drip course moulding with 15 mm. thick cement plaster (1:4) complete. (Cement 0.7Kg/Mtr.) In ground floor

6) Renewing coping of compound wall with brick work and 15 mm. thick cementplaster (1:4) complete (Payment to be made on length of wall) b) 250 mm. wide coping (Cement 5.0Kg/Mtr.)

7) Supplying and laying true to line and level 20 mm/ 25 mm. thick precast roof tiles made of cement conc. with stone chipsas may be paid separately a) For 20 mm. thick precast tiles (cement 14.6 kg/ Sq.m for underlayer

8) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar a)10 mm thick plaster including rounding off or chamfering comers as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

Supplying fitting approved type ventilator in position after cutting holes In walls setting in cement mortar mending damages to wall and plaster and two Coats of paint of approved brand of any shade. Payment of mending good damages of wall & plaster and painting to be made separately. (b) R.C.C ventilator of 20 mm. Thick (i) Upto 0.10 sq.m. area

10) Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm.dia rod complete including mending damages. Payment for damage and repair to be made separately For Qtr llI/3

11) 125 mm. thick brick work with 1st class bricks In cement mortar (1:4) in ground floor

12) Artificial stone In floor, dado, High polishing grinding on this item is not permitted with ordinary cement). Using grey cement For Qtr III/3 ii) 25 mm. Thick

13) Supply1ng. fitting and fixing Marble Slab/tile of 15 to 18 mm thickness direction of Engineering -in Charge in Ground Floor. (White cement and Pigment to be supplied by the Agency) b) With Chawk Dungri 0) Area of each tile exceeding 0.3sq.m. but not exceeding 0.6 sq.m.

Supplying. fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado wall in -curing complete. [White cement, Pigment to be supplied by the Agency] b) With Chawk Dungri

Supplying, fitting & fixing 1st quality Ceramic tiles in walls & grout materials etc. B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq,.m. a) Area of each tile upto 0.09 Sq.m b) Coloured decorative

16) 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) In floor, stair & lobby including pointing In cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. (Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]

17) Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement: 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]

18) Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing asper direction of Engineer-in -Charge in Ground Floor.

19) Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).

20) Shutter of 1/3rd panel, 2/3 glazed of doors and windows, as perdesign (each panel consisting of a single plank without joint and with ordinary glass of 7.4 kg per Sq.m/3mm Thick) fitted withputty bed, teak wood bead and nails including fitting and fixing shutters in position but excluding the cost of glass, putty, teak bead, nails, hinges etc. and other fittings, in ground floor

21) Supplying, Fitting & Fixing Factory made pre laminated P.V.C. door frame of slze 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two comers and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The twovertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. Am minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer's specification and direction of Engineer-in-charge

22) Supplying, Fitting 8 Fixing 30 mm thich both side prelaminated Double Leaf Factory made solid Panel PVC Door Shutter as per direction of Engineer in Charge in ground floor.

Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete. (c) Supplying 6 levers 'Godrej Crystal Satine Mortice Lock with keys including|

24) Labour for taking out door and window frame Including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damages complete. (Concrete and brick work for mending damage will be paid separately) For QTR III/3, III/2 la) Upto area 2.5 Sq.m

25) Taking out shutter of door and window, dismantling by parts (for repair orreplacement of damaged parts), reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different Item, payment under item 73 will be made once only).

26) Wood work in door and window frame fitted and fixed in position complete Including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).

27) Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(ln case of non-supply of single plank, penal rate of reduction of 20% will be made) iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu., Gamar, Champ.Badam,Bhola, Mogra, Hallak.

28) a) M.S.or W.I. ornamental grill of approved design joints continuously welded with M.S, WI. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./W.I gate etc. with point welding at not more than 150mm apart complete In all respect as per design including cost of all labour and materials.

30) M.S. gate of Jail type as per approved design made as per direction of the Engineer-in -charge

31) Supplying, fitting and fixing cast iron heavy type spiral staircase Crete (1:3:6) complete in all respect with all labour and materials

32) Brick work with 1st class bricks pugging it complete

33) White washing including cleaning and smoothening surface thoroughly (b) Two coats (to be done on specific Instruction).

Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly i) Internal surface (All floors) a) One coat of colour wash b) Other than yellow, pink. c) External surface (Ground floor) d) One coat e) Other than yellow, pink

35) (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

36) (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary a) On timber or plastered surface b) With super gloss (hi-gloss) c) Two coats (with any shade except white)

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary d) On steel or other metal surface e) With super gloss (hi-gloss) f) Two coats (with any shade except white)

38) Ready mix Wax polishing to wood work including preparing surface. a) On new wood work 39) Number plaque of building (plaque size up to 225 mm x 225 mm) made of sand cement plaster (1:2) on face of wall or plinth with 50 mm size letters P.W.D and the number of the structure formed thereon (in sunk type)including painting the letters and the number complete as per direction. (Cement- 1 kg/No.)

40) Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved for accessories, specials. a) For Exposed Work i) CPVC Pipes Class-1, SDR-11

41) Supplying, fitting and fixing white vitreous china best quality approved make wash basin with approved paint. ii) 550 mm X400 mm size

42) Supplying, fitting and fixing pedestal of approved make for wash basin (white)

43) Supplying, fitting and fixing 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand).

44) Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of panting of C.1. brackets. ii) 630 mm X550 mm X 180 mm

45) Supplying, fitting and fixing shower of approved brand and make Chromium plated overhead Rain shower (Square), size-180x180mm with revolving joint (Model Code No. F7010501 of CERA or equivalent)

46) Supplying, fitting and fixing bib cock or stop cock. (b) 0) Chromium plated Stop Cock (Equivalent to Code No. 513/A) & 513(B) &Model -Tropical / Sumthing Special of ESSCO or similar

46) Supplying, fitting and fixing bib cock or stop cock. (b) 0) Chromium plated Stop Cock (Equivalent to Code No. 513/A) & 513(B) &Model - ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model -Tropical / Sumthing Special of ESSCO or similar brand)

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438/ 1965 together with brass C.P. hinges i) 600 mm X450 mm

22 Supplying, fitting and fixing towel rail with two brackets. b) Aluminium ii) 25 mm dia. and 750 mm long

Dismantling Indian WC includ1ng taking out base concrete as necessary

4 Supplying. fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding P or 'S trap (excluding cost of concrete for fixing) ii) 530 mm X 410 mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) – Multilayer b) 1000 litre capacity

Labour for hoisting plastic water storage tank. i) Upto 1500 litre capacity. a) Upto 1st story from G.L

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed. a) Upto 20 users: i) Within a lead ad of 150 metre

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) in all respect with all costs of labour and materials. ii) With Bazree (N.B Variety) (Other than SAIL/TATA/RINL At Qt III/2 &VI/2

Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 (AXI) CPVC Pipes Class-1,SDR-11 40 mm Dia

Labour for boring tube well of required dia. by water jet system throughany type of soil strata including hire and labour charges for boring pipes scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore (a) For depth upto 150 metre. (i) 40 mm dia. boring etc.

Supplying high density polythene strainer of approved make with adapter conforming to 1.S. specifications (i) 40 mm dia.

Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. Cm

Supplying, fiting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of with all necessary approved make conformingto IS-15778: 2007 accessories ,speciais viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all espect including cost of all necessary fittings as required, jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials.(a) For Exposed Work For suction cum delivery pipe upto tank