Providing and placing portable cabins for Temporary Railway siding near Wardha bridge at Mungoli mine under Mungoli Sub Area. (2nd Call)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or More.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 Coarse sand).

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing and Fixing Portable GI office cabin of dimension 35 ft x12 ft x 8.6 ft with 3 office inbuilt partition of 12 ft x 9.6 ft (each) and 1 inbuilt partition toilet of 5 ft x 4 ft as per following technical specification mentioned below and including cost of transportation, loading, unloading, fixing all as per instruction of Engineer in charge. 1. Bottom Frame 100mm x 50mm thick MS I Channel. 2. Top Frame 50mm x50mm 2mm thick MS - Specially Formed pipe 3. Stiffener Bottom 100 x 50 mm x 3mm Rectangular Pipes, & 40 x 20 x 2mm thick 4. Stiffener Top Specially Formed MS Sections Combination of 1.mm 5. Side Wall Stiffeners 1.mm thick MS - Specially formed Channels 6. Paneling Outside 1.mm thick GI – Specially Formed Grooved Sheet 7. Internal Wall Paneling 8mm Prelaminated MDF Board indise Wall. 8. Roof Outside 1.mm thick GI - Specially Grooved Sheet - Properly Sloped and water tight. 9. False Ceiling 8mm Prelaminated MDF Board. 10. Bottom Flooring 18mm Cement Bonded Fiber Board(100% Water, Termite & Dimensional proof) with 1mm Vinyl Carpet 11. Aluminium Windows Double Shutter Sliding Aluminium Powder Coated Windows– 4mm Tinted Gray Glass with Safety Grills 12. Door Constructed of Rigid Steel Frame and Door Closer, Aldrop & Handles. Door Frame 1.6mm thick & Door 1.2mm thick 13. Insulation Glass Wool density of 48kg/m3 Rocks Wool Insulation – (Side Wall- 25mm), (Ceiling 25mm) 14. Wiring All wiring shall be concealed type & shall be of PVC insulated copper wire (FR grade) of ISI – POLYCAB MAKE 15. Electrical Fittings AC 50Hz Tubelights , Door Light , Fan, Switches & Sockets, Air Conditioners Point, ELCB At the INPUT JUNCTION for Earthing Earthing Point shall be provided for SAFETY 16. Outside Painting Phosphate the Cabin and painting with coat of Epoxy primer with Two Coat of Enamal Paint 17. Legs 80 x 80 x 150mm Four legs at all four corners 18. Hooks Specially formed Hooks for Easy lifting and Shifting 19. Partition Wall (Optional) 1.2mm thick Specially Formed Galvanized Channels with 7.5mm MDF BSL Sheet 20. Furnitures All furniture made in 12mm Prelamineted Partical Board. Electrical items Fan 03 nos, led light 06 nos, 6 amp socket 06 nos, 16 Ac provision 03 nos, bulkhead 03 nos, MCB board 01 nos, Window with grill 03 nos, Door 05 nos Toilet items Flush tank 01 nos, Septic tank 01 nos, Drainage pipes as per requirement, WC 01 nos, Wash basin 01 nos, Mirror 01 nos, jet spray 01 nos , Exhaust Fan 01 nos, Water tank 01 nos

Total impact of GST for the purpose of CTC

INR Seven Lakh Eleven Thousand Six Hundred & Seventy Six and Paise Eighty Eight Only