Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹12.7 LAccepted-AOC | ₹12.7 L | 1 | Accepted-AOC ok |
| 2 | Rejected-Technical 24A LAJPAT NAGAR NEAR BUS STAND YAMUNA NAGAR | YAMUNANAGAR | HARYANA | 133103 | - | - | Rejected-Technical Disqualified |
| 3 | Rejected-Technical | - | - | Rejected-Technical Disqualified |
| 4 | Rejected-Technical CHAS BOKARO | BOKARO | JHARKHAND | 825102 | - | - | Rejected-Technical Disqualified |
Tender Value
₹13.0 L
EMD Value
₹26,000
Closing Date
21 May 2026, 2:00 pmClosed
Executive Engineer, MID Bokaro.
o/o EE Minor Irrigation Division, Bokaro Camp 2 Bokaro.
Installation of Open Gym in Bada Footbal Play Ground in Kodwatand Panchayat under Block Gomia Bokaro.
2026_WRD_114109_1
WRD/MID/BOKARO/F2-05/2026-27 (2nd call)(Gr no. 03)
Open Tender
Civil Works
90 days
GOMIA
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,500
₹26,000
5 Jun 2026
16 May 2026
23 May 2026
16 May 2026
21 May 2026
16 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | CHEST PRESS SINGLE MAIN FRAME: 100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.
ARM HANDLE & REST SEAT FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS OF 2.65 MM.
HANDLE COVER : TPEE INJECTION MOULDED.
BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB, 32 NB AND 25 NB. BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 57,000 | ₹57,000 | BI01010001010000000000000515BI0100001113 |
| 2 | ROWER MAIN FRAME: RECT. PIPE 80 X 40 JINDAL MS PIPES HAVING WALL THICKNESS OF 2 MM.
ARM HANDLE & LEG FRAME: 25/50 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
\HANDLE COVER :TPEE INJECTION MOULDED.
BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
FASTENERS: USED FOR FIXING THE BASE FRAME.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 50 NB.
BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 43,000 | ₹43,000 | BI01010001010000000000000515BI0100001114 |
| 3 | AIR RIDER MAIN FRAME:100 NB AND 65 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.
ARM HANDLE & REST SEAT & LEG FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
HANDLE COVER :TPEE INJECTION MOULDED.
REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 65 NB AND 32 NB.
BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 43,000 | ₹43,000 | BI01010001010000000000000515BI0100001115 |
| 4 | IR WALKER - SINGLE
IR WALKER - SINGLE MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE & LEG FRAME: 25/32NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB.
BEARING KIT: BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 52,000 | ₹52,000 | BI01010001010000000000000515BI0100001116 |
| 5 | LEG PRESS CUM TWISTER MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.
ARM HANDLE & REST SEAT & LEG FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
HANDLE COVER :TPEE INJECTION MOULDED.
BACK & REST & TWISTER SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB, 32 NB AND 25 NB. BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 52,000 | ₹52,000 | BI01010001010000000000000515BI0100001117 |
| 6 | ELLIPTICAL CROSS TRAINNER MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65 MM.
ARM HANDLE & FOOT REST FRAME: 25/32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65 MM.
HANDLE COVER :TPEE INJECTION MOULDED.
FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2 MM WITH PRECISION PUNCHED HOLE OF 10 MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47 MM & 62 MM. PIPE END CAP: USED FOR 100 NB, 32 NB AND 25 NB. BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60 MM AND LENGHTH 72 MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 53,000 | ₹53,000 | BI01010001010000000000000515BI0100001118 |
| 7 | BIG SHOULDER WHEEL MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE : 32/20 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.
HANDLE : HANDLE BEARING GRIP.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB.
BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 49,000 | ₹49,000 | BI01010001010000000000000515BI0100001119 |
| 8 | CROSS SKIER MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE & FOOT REST FRAME: 25/32/40 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.
HANDLE COVER :TPEE INJECTION MOULDED.
FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB, 40NB.
BEARING KIT: HAVING ONE U TYPE MS CLAMP AND BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED | 1 | no | 52,000 | ₹52,000 | BI01010001010000000000000515BI0100001120 |
| 9 | SURFBOARD MAIN FRAME: 100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE & FOOT REST FRAME: 32 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.
HANDLE COVER :TPEE INJECTION MOULDED.
FOOT REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 100NB, 32NB.
BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 54,000 | ₹54,000 | BI01010001010000000000000515BI0100001121 |
| 10 | LEG EXTENSION MAIN FRAME:100 NB JINDAL GI PIPES HAVING WALL THICKNESS OF 3.65MM.
ARM HANDLE & REST SEAT FRAME: 32/50 NB JINDAL GI PIPE HAVING WALL THICKNESS 2.65MM.
BACK & REST SEAT : PERFORATED GALVANISED SEAT HAVING WALL THICKNESS OF 2MM WITH PRECISION PUNCHED HOLE OF 10MM DIA.
BOTTOM BASE COVER: PLASTIC INJECTION MOULDED PPCP MATERIAL.
BEARING CAP: NYLON INJECTION MOULDED BEARING CAP 47MM & 62MM. PIPE END CAP: USED FOR 32NB AND 25NB.
BEARING KIT: BUSH Ø 60MM AND LENGHTH 72MM WITH TWO NO. OF BEARING 2RS ZZ AND 2 RUBBERS SEAL FOR BEARING, CIRCLIP LOCK FOR BEARING PIN Ø25 MM.
ALL NUT, BOLTS AND WASHER MUST BE GALVANISED. | 1 | no | 39,000 | ₹39,000 | BI01010001010000000000000515BI0100001122 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_154133.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
TenderdocumentGrn03Opengymnit05.pdf
Tender Documents • 1.53 MB
BOQ_154133.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid